Reviews Phos copper Brazing Rod

Forney 48571 Super Sil Flo Brazing Rod, 1/8-Inch, 1/2-Pound

  • Super Sil-Flo brazing rod is a brazing alloy that is ideal for large and small copper tubing installations.
  • Typical applications are refrigeration control valves, joining copper wires to rotor bars, electrical connections.
  • T joints, wage joints and sleeves, couplings on return bends and condenser fitting.
  • Sil-flo is not recommended for ferrous metals such as iron or steel.
Check Stock

10 Rods Copper Brazing Rod 15.7 Low Temperature Welding Rod Welding Consumables with Good Liquidity for Welding Refrigerator Air Conditioner Copper Pipes Copper Products

  • MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
  • ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
  • APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..
Check Stock

Silver Brazing Rod BCuP-5 20 Flat Bar Welding Stick JAgP-15 15% Silver Phos Welding Rods 0.050 x1/8 x14 for Air-conditioners Refrigerators and Freezers

  • Material: The package includes 20PCS 15% Silver Brazing Rods BCuP-3.Silver (Ag) 4.8-5.2%.
  • Copper (Cu): Rest. For the best results..
  • Standard: The BCuP-5 silver brazing rod containing 15% silver, is equivalent to the American standard AWS BCuP-5 national standard BCu88PAg and L205. It has certain plasticity and is suitable for welding of copper and its alloy joints that cannot maintain a tight fit. Melting point 645-815 degrees Celsius..
  • Advantage: The low temperature phosphor silver welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 704-816℃, good fluidity during welding, molten metal can flow to small gaps.
  • Application：The brass brazing rod is used for brazing of silver & silver alloy in motors, air-conditioners, meters, and refrigeration industry,Widely used in brazing of copper and copper alloys in electrical machinery, electrical appliances, glasses and other industries.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions.
Check Stock

Fox Alloy 20pcs Copper Brazing Rods BCuP-2 (5/64\) 2mm Phosphor Round Self Fluxing Copper Welding Rods Sticks TIG Arc Pipes for Air Conditioner Refrigerators

  • Material: The package includes 20PCS 2.0mm cooper brazing rods BCuP-2 brass welding rod.
  • Standard: The copper welding rods kit conforms to AWS A5.8.
  • Advantage: The low temperature phosphor copper welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 640-770℃, good fluidity during welding, molten metal can flow to small gaps.
  • Application：The stick TIG welding rods is used for brazing of copper & copper alloy in motors, air-conditioners, meters, and refrigeration industry.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions..
Check Stock

3mm Copper Round Rod, Favordrory 20PCS Copper Round Rods Lathe Bar Stock, 3mm in Diameter 100mm in Length

  • 【Size】：5/8" OD (16mm, 4" Length(100mm).
  • 【Material】:110 Copper（The content of copper is 99.9%）.The copper rod has high purity, fine structure, extremely low oxygen content, no porosity, trachoma and looseness..
  • 【Advantage】:The electrical conductivity and thermal conductivity of copper are second only to silver, so copper rods are mainly used to make conductive and heat-conducting equipment..
  • 【Good Appearance】: The surface of the copper rod is smooth and full of metallic luster..
  • 【Wide Application】:Easy to work under hot and cold pressure.Copper rod can be used for welding and brazing.Pure copper rod is suitable for DIY hobbies,jewelry decoration and handicrafts, etc..
Check Stock

30Pcs Copper Brazing Rod Copper Phosphorus Solder Round Selffluxing Brazing Rod Copper Phosphorus Brazing Rod 25cm Copper Welding Rod for Air Conditioner Refrigerators

  • 【Perfect Welding Performance】: Our phosphor copper welding rods are mainly used in the welding field of copper and copper pipe joints of....
  • 【Easy to Use】: Standard processing with 2.5 mm diameter, the low temperature phosphor copper welding rod is easy to install and remove.This coated....
  • 【Self-flux】: Our copper welder rods owns stable performance and durability. In particular, this copper welding rod has good fluidity during....
  • 【Wide Fields of Welding】: Our copper phosphorus solders are commonly used for welding copper tubes of air conditioners and refrigerators, which....
  • 【What You Get】: Our package includes 30 pieces of copper brazing rod in 3/32-Inch diameter, and this package is about 0.66 pound. These 30pcs....
Check Stock

21 Sticks BLUEFIRE BCuP-2 Half 1/2 lb Self Fluxing Phosphor Copper Brazing Alloy Welding Rods No Need for Flux 0.050 x 1/8 x 14 Industry Professional Grade Propane Gas Soldering Torch Supply

  • Self Fluxing: USA USA AWS A58 Class: BCuP-2 brazing alloys rods. Contents: Phosphor (P): 6.6-7.4%.
  • Copper (Cu): Rest. This brazing alloy is close to eutectic crystal composition. It is self fluxing and do not need any brazing flux when soldering copper to copper or copper to brass joints, while for brazing brass to brass parts, Bluefire JFB-102 brazing flux is recommended for best results..
  • Valued Pack: Each tube contains 21 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!.
  • Best Performances: Solidus Temperature: 1310°F / 710°C, Liquidus Temperature: 1508°F / 820°C. Recommended joint clearance: 0.002"/0.007", Fluid Rating: 5. JCuPB brazing rods contain lesser phosphors, resulting a much better plastic performances and a little higher melting points..
  • Versatile: A popular and economic solution for HVAC, Plumbing and Mechanical repairing. Ideal for gas welding, MIG and TIG welding, contact welding, HF brazing and some furnace welding. Perfect for brazing Copper to Copper, or Brass and Bronze joints in A/C, freezer, evaporator, heat exchange, water heater and etc. Cannot be used to weld iron or steel parts..
  • High Quality: All Bluefire brazing alloys are manufactured under highest quality control. Equivalent to HARRIS 0 PN0....
Check Stock

WeldingCity 4-pcs Low Temperature Flux Cored Zinc/Aluminum (Zn98-Al2) Brazing Rod 20″ for Joining Al-Al/Cu Alloy in HVAC/Heat Exchanger

  • Premium quality flux cored low temperature Zinc/Aluminum 20″-long brazing rods Zn78-Al22, Zn98-Al2 and Zn92-Al8 series for joining Al-Al and Al-Cu alloy in HVAC, heat exchanger and refrigeration repairs..
  • Flux core means no manual flux application required. Non corrosive flux and ensures good oxidation protection and capillary fill. Ideal for joining aluminum alloys of the 1000, 3000, and 6000 series as well as aluminum to copper welding..
  • Good replacement to equivalent products such as Lucas Milhaupt AL822/AL802 and Harris Aluxcor Zinc-Aluminum brazing filler metals, etc..
  • Brazing rod dimension: 20-in (500mm) length and .078″ (2.0mm) diameter.
  • brazing temperatures as shown in spec. table in picture. Available packages: 4-pcs, 1/2-lb and 1-lb..
  • U.S. based welding supplier. Strong technical support with experienced customer service to address buyer’s any question..
Check Stock

BLUEFIRE J9802B 1/4lb Flux Cored Low Temperature Aluminium Brazing Coil All Purpose Welding Coil for Almost All Metals Soldering Propane Torch Universal Welding Rods flux Free

  • 【No Flux Needed】No additional flux is needed. BLUEFIRE brazing coil can be used directly with propane torch, which will save you a lot of money on extra flux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
  • 【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
  • 【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..
Check Stock

Uniweld KCHP Cap n Hook Brazing/Welding Outfit Tanks Not Included

  • Professional contractor grade portable oxyacetylene welding and brazing outfit-tanks not included (sold separately).
  • Cap'n hook five flame tip for brazing up to 1" copper tubing-u's Patent no. 4,191,333.
  • Welding/brazing tip for brazing up to 1" copper tubing and welding up to 1/8" steel.
  • Centurion series regulators with Protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate Gas control.
Check Stock

Hot Max 24003 1/8-Inch by 36-Inch Mild Steel Brazing Rod 1#

  • General purpose copper coated mild steel brazing rod for all low carbon steels.
Check Stock

Supplying Demand 15% Silver Solder Brazing Rods 4 Sticks 19-1/2 Inch Length for HVAC Refrigeration

  • Rod shape is flat. Solidus temp is 1190 and the Liquidus temp is 1475.
Check Stock

Forney 48490 Flux Coated Bronze Brazing Rod 3/32-Inch-by-18-Inch 10-Rods

  • Fluxed low fuming bronze brazing rod is a high quality, low fuming bronze brazing rod with flux.
  • Formulated for high tensile strength and ductility.
Check Stock