Reviews Phanteks Sata Cable

Phanteks PH-ES614LTG_AG Chassis/Tempered Glass Panel, Full Tower ATX Case, Anthracite Grey

  • Sandblasted aluminum faceplates. Ambient lighting with LED control (10 colors). Clean interior – Hidden PSU& HDDs.
  • Tempered Glass Panel on hinges. Easy accessibility to fans and dust filters. Equipped with Phanteks’ Velcro cable ties. 27.5mm cable management space + additional cable compartment (39mm)..
  • Equipped with Phanteks’ PWM Hub. 2x USB 3.0, 2x USB 2.0, Headphone, Mic, Reset, LED Switch. 2x SSD Bracket Included. Removable HDD Cages..
  • Compatible with Phanteks RGB LED Strips and RGB Motherboards. Asus Aura and Mystic Light Ready..
  • Easy Radiator Installation. Reservoir Mounts. Pump Bracket.
Check Stock

Phanteks 3 Pin Digital RGB LED (PH-CB-DRGB3P_MB) 600mm Extension Adapter Cable for Motherboard - Black

  • 600mm in length and flexible for easy cable routing and management.
  • Synchronize and control using Phanteks DRGB cases or compatible addressable RGB motherboards.
  • The cable features two connectors one for Phanteks DRGB products and the other for third party addressable RGB products.
  • Compatible with Asus MSI Gigabyte and Asrock addressable RGB motherboards.
  • Connector 1 x 3 Pin adapter (Female 5V Data X Ground) to MB DRGB PIN header (Male) 1 x 3 Pin adapter (Male 5V Data X Ground) to split another DRGB adapter 1 x 3pin connector (Female 5V Data X Ground) to PHANTEKS DRGB Device.
Check Stock

Phanteks 140mm Cooling Fan (PH-F140SP_BK)

  • PH-F140SP has a larger base size with a magnetic brushless DC motor to avoid the effects of resonance and for rotational stability. To create better structural strength and reduce the vibration occurrence, Phanteks redesigned the back frame of PH-F140SP.. Air flow – 82.1 CFM. Noise level – 19.0 decibels.
  • With the noise reduction challenges in mind, we modified the component for lower actuator noise, PCBA for lower electromagnetic noise, brushless motor structure for lower operating noise and frame rib for lower wind and vibration noise..
  • The new nine high pressure MVB blades are precisely angled to generate a silent controlled airflow. The blades produces a downdraft vortex allowing for greater amount of air passage through and reduce airflow turbulence across the surface of the blades.
  • Composed by MOSS and SSC systems, Phanteks’ UFB bearings have an effective hub-tip ratio to achieve a state of equilibrium reducing air and vibration noise..
  • Eight pre-installed rubber pads are now bigger and designed to reduce more vibration..
  • 400mm extension cable included to provide for better cable management and flexibility..
  • PH-F140SP has a larger base size with a magnetic brushless DC motor to avoid the effects of resonance and for rotational ....
Check Stock

Phanteks PH-EC416PTG_BK Eclipse P400 Steel ATX Mid Tower Case Tempered Glass Edition Satin Black

  • Full Metal Body, Steel Exterior and Tempered Glass Side Panel. Clean interior –PSU Cover & HDDs. 10 color RGB downlight + RGB power light with....
  • Fully Equipped with Magnetic Dust Filters. Innovative Modular HDD System (requires PH-HDDKT_02). 2x Drop-N-Lock SSD brackets included. Long GPU....
  • Full Size PSU support. Removable HDD cage for installation of long PSU's (>270mm)/water-pump..
  • Hidden Front I/O (2x USB 3.0, Headphone, Mic, LED Control, Reset). Clean cable management using Phanteks' preinstalled Hoop-N-Loop cable ties..
  • Optimal airflow - Direct airflow to CPU/GPU. 1x Phanteks 120mm Fan in front. 1x Phanteks 120mm Fan in rear. Supports water-cooling radiators (up to....
Check Stock

Phanteks RGB LED 4 Pin Adapter, Specified for Cases with Multi Colors RGB Control (PH-CB_RGB4P) Black

  • Compatible with upcoming motherboards with 4pin RGB Header.
  • Allows you to synchronize your Phanteks cases with Multi-colors LED control (Luxe, Mini XL, P400..) and Phanteks Led strip to the motherboards software..
  • Customize and colorize your LED strip and case LED with the use of the motherboards software.
  • Long cable length for easy wiring and cable management.
  • Length: 609mm (24in), Connector Number: 3.
  • Connector Detail:1x RGB LED Extension Connector (12V, G, R, B), 1x Motherboard RGB LED Connector, 1x RGB LED Strip Connector. Terminal Gender:M-FDescriptionPhanteks' RGB LED Adapter is a simple, frustration-free solution to the upcoming RGB integrated motherboards that includes the RGB headers. This adapter will allow you to synchronize and control the lighting of your LED strip and Phanteks cases with the motherboards' lighting software..
Check Stock

Phanteks (PH-ES916E_BK) Enthoo Elite Extreme Full Tower Chassis Aluminum, Black

  • 4mm sand-blasted aluminum exterior. Tool-less 4mm tempered glass window. Clean interior with aluminum covers – Hidden PSU & Cables. Ambient RGB Illumination.
  • Tri-chamber design – Hidden PSU, Isolated Storage/Cooling Chamber, Main Chamber. Full Size GPU Support. Front I/O with dual system support.
  • Convenient Installation in standing position. Integrated RGB illumination mode and MSI Mystic Light and Asus Aura compatible. Tempered Glass Panel on hinges.
  • 35mm cable management space + additional cable compartment. Equipped with Phanteks’ Velcro cable ties. 2x Phanteks PWM Hubs.
  • Multifunctional cable cover. Swappable panels (performance/silent). Support Dual system (ITX)/ Dual PSU. Vertical GPU mount bracket..
Check Stock

Phanteks Halos 120mm Digital LED Fan Frame, Black (PH-FF120DRGBP_BK01)

  • Illuminate any fan. There is no compromise on performance. Even high quality fans made from PBT material, like Phanteks MP and SP fans, can now be illuminated..
  • High density Digital LED. Light is spread evenly thanks to high density Digital LEDs and diffuser..
  • Easy cable routing. Daisy chain all of Phanteks Digital RGB products together.
  • Sync Digital RGB lighting. Sync the Digital RGB LED lighting with any Digital RGB equipped Phanteks digital RGB and motherboard. Compatible with Asus (addressable Aura Sync), MSI (Mystic Rainbow light)..
  • Mounting screws included. The Halos Lux series Digital RGB Fan Frame can be mounted directly to the fan with the included fan screws or mounted to a radiator mounted fan using the UNC 6-32 radiator screws..
Check Stock

Phanteks PH-FF140RGBP_BK01 Halos RGB Fan Frame High density LEDs RGB 140mm fan mounting

  • Illuminate any fan. There is no compromise on performance. Even high quality fans made from PBT material, like Phanteks' MP and SP fans, can now be illuminated.
  • High density LED. Light is spread evenly thanks to high density LED's and diffuser. Easy cable routing. Daisy chain all of Phanteks' RGB products together.
  • Sync RGB lighting. Sync the RGB lighting with any RGB equipped Phanteks case and motherboard. Compatible with Aura Sync, Mystic light, RGB Fusion.
  • Mounting screws included. The Halos RGB Fan Frame can be mounted directly to the fan with the included fan screws or mounted to a radiator mounted fan using the UNC 6-32 radiator screws.
  • Compatibility: 140 fan mounting. RGB LED type: RGB LED strip hard board , +12V, G,R,B. LED Number: 21pcs.
  • RGB4P connector for motherboard is required and sold separately.
Check Stock

Phanteks PH-ES314ETG_AG EVOLV mATX Tempered Glass Edition Aluminum Exterior RGB LED Illumination Micro Tower Case Gray Anthracite Gray

  • Aluminum body (3mm). Clean interior – Hidden PSU/HDD/Cables. RGB LED illumination. Dual Tempered Glass Panels.
  • Magnetic Tempered Glass Panels on hinges. Quick release panels for easy access. Removable dust filters. Long GPU support (up to 319mm/12.5in).
  • Phanteks Premium fans 140mm. 26mm cable management space + additional cable compartment in bottom. Support Synchronization with RGB Motherboards and Phanteks RGB products.
  • Water-cooling ready – Radiator support up to 280mm(top) and 360mm(front), Pump bracket. AIO water-cooling products up to 360mm.
Check Stock

SATA Cable, SATA Data Cable and SATA Power Splitter Cable (4 Pack) SATA III Cable 6.0 Gbps SATA 3.0 Cable,15 Pin Power Splitter Cable

  • Sata Cable is made with copper wires, good contact performance for data transmission and environment friendly. SATA data cables and SATA power cables are compatible with all SATA connectors (HDD, SSD, CD DVD Blu-ray drives)..
  • Sata data Cable 6 Gbps Fast Data Transfer: The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps, 2x faster than SATA II, STRAIGHT & RIGHT ANGLE- Package includes both straight and right angle cable to meet your different demand. 90-degree design can make for better cable management in some situations, especially in tight spaces..
  • Secure Connection: Locking latch on each end of the cable to ensure secure connections for fast and reliable file transfer..
  • Accessories 2xSata cable:1x1x 4-pin ATX to 2x 15-pin Sata Straight Power Splitter Cable 1x 15-pin SATA to 2x 15-pin Sata Straight Extend Splitter Cable.
  • Black 1 x Straight SATA 3.0 Cable 1 x Angle SATA 3.0 Cable.
Check Stock

Phanteks (PH-ES614PTG_BK) Enthoo Pro ATX Chassis, Tempered Glass, Intergrated RGB Lighting, Black

  • Brushed aluminum Look. Clean interior – hidden PSU& HDDs. Tempered glass panel.
  • Easy accessibility to fans and dust filters. Equipped with Phanteks' Velcro cable ties. Optical Drive bay. Reservoir mounts and pump Slots.
  • 2 x USB 3.0 / USB-C GEN 2 / Mic / Headphone / Reset / RGB Switch Front Ports.
  • Compatible with Phanteks RGB LED strips and RGB motherboards. Easy radiator Installation. Reservoir mounts.
Check Stock

SATA Power Cable 3 Pack SATA 15-Pin to 6-Pin PCI Express Card Power Cable Adapter 8 Inch

  • Sata Power Cable Usage: Use one of the SATA power connectors on the power supply to add a Sata 15-pin to 6-pin adapter that allows you to use the SATA power cable to power the video card inside the computer. Provides a cost-effective way to connect the PCI-E video card to the serial SATA power connector provided by the computer power supply..
  • Connector: 15-pin SATA male connector, and 6-pin female PCI Express card power adapter.
  • Cable material: 6 Pin PCI-e to SATA Power Cable 18 AWG Full Copper.
  • Standard length: The SATA power cable has an 8-inch (20 cm) long connector, and the Sata 15-pin to 6-pin adapter is ideal for internal cable management..
  • Safe connection: Connecting the SATA power cable can reduce the risk of damaging the internal connectors that are difficult to connect and unplug, and can also reduce the tension on the SATA drive or the connector of the computer motherboard.
Check Stock

Cable Matters 2-Pack 15 Pin SATA to 4 SATA Power Splitter Cable - 18 Inches

  • SATA splitter cable powers up to four Serial ATA HDD, SSD, optical drives, DVD burners, and PCI-E cards from a single connection to computer power supplies.
  • Snug-fitting drive SATA power cable clicks into place on your power supply to provide a secure connection that prevents accidental disconnection.
  • Upgrade cost saver SATA power splitter cable spares the expense of upgrading an existing power supply to connect new SATA drives.
  • Cost-effective 2-pack provides a spare power cable for new installations or repairs.
  • Keep a spare in your IT toolkit or at the test bench.
  • DIY or pro installers both appreciate the convenience of sharing a PSU connection when installing new internal components like a DVD burner.
  • 18 inch cable harness has 4 SATA drive receptacles spaced at 4.5 inch intervals.
  • Provides sufficient length for internal cable management to minimize airflow impact in most configurations.
  • Hdd power cables have 4-SATA 15 pin female receptacles and 1-SATA 15 pin male plug at one end.
  • Constructed with flexible 18 AWG conductors for reliable performance when connecting four SATA hard drives to a power supply.
  • Supports 3.3V, 5V, and 12V power voltages between SATA I, II, III drives and power supply connections without any degradation of performance.
Check Stock