Reviews Pe Pressure Pipe

SNS SPU-1/4 1/4\ Tube OD Plastic Straight Union Pipe Tube Fitting Straight Pneumatic Connector(10 PCS)

  • Made of high-quality plastics and brass for durable use.
  • Advantages: Easy installation and disassembly, good sealing performance.
  • Operating Pressure: 0-0.9Mpa,Proof pressure:1.32Mpa.
Check Stock

Honeywell Natural Gas Permasert Version 2.0 Stab Coupling - 1 CTS - PN PC50103

  • Product: 1" CTS Stab Coupling Permasert Version 2.0 P/N: PC50103.
  • Details: 1-1/8" OD, 0.090/0.099/0.102 wall.
  • Fits line size: 1" inch CTS PE Tubing (1-1/8" Outer Diameter).
  • Used on Medium Density (yellow) PE Polyethylene plastic pipe for repairs or joining lengths together. Works for Natural Gas (NG) or Propane (LPG).....
  • IMPORTANT NOTE: There are various pipe sizes described as 1 Inch. This for CTS pipe not IPS pipe. These are different pipe sizing standards, so please....
Check Stock

1 CTS Elster Natural Gas Permasert Line Chamfering Tool Version 2 PN 58504

  • Line size: 1 inch CTS Poly Pipe (1-1/8" Outer Diameter) *Please review sizing diagram..
  • Creates a proper O.D. and I.D chamfer which prevent seal damage when stabbing of the PE piping into New 2.0 Permasert couplings. REQUIRED to properly....
  •  IMPORTANT NOTE: There are various pipe sizes described as either IPS or CTS. These are DIFFERENT pipe sizing standards with different OUTER and....
Check Stock

60 Pieces Push Air Fittings Include 1/4 Inch OD Push to Connect Fittings Pneumatic Fittings Kit with 1 Black 1/4 Inch OD Nylon Air Tubing, 15 Spliters 15 Elbows 15 Tee 15 Straight

  • Package includes: you will receive 15 straight PU 1/4 inch pneumatic connectors and 15 elbow PV 1/4 inch pneumatic connectors and 15 PY 1/4 inch pneumatic connectors and 15 T-type PE 1/4 inch pneumatic connectors (black blue) and 1 roll of 1/4 inch OD black pneumatic nylon tube 33 ft (approx. 10 m), a nice combination for easy use and replacement of your daily life.
  • Size details: the tube outer diameter is about 1/4 inch, 4 types of pneumatic connections and a roll of 10 m (33 ft) 1/4 inch OD black pneumatic nylon tubing, the right size for your pneumatic piping needs.
  • Practical design: the air line fittings release ring of the 1/4 inch pneumatic air line fits the ellipse design to ensure that the disconnect device is in a nice shape, which can provide sealing performance, maximum pressure is 0~145 Psi, operating temperature is 32~140 degree Celsius.
  • Easy to install: the 1/4 inch pneumatic connector is easy to install and remove on 1/4 OD pipe, even easy to change the direction of the pipe connector after installation, suitable for PU/ PA/ PE/ PVC pipe.
  • Reliable material: these pneumatic connectors are made of quality plastic and stainless steel, corrosion resistance and ductility, which can serve you for a long time, and bring you a nice use experience.
Check Stock

Bulkhead Union Push to Connect Tube Fitting 3/8 In Tube OD Stainless Steel Double Threaded 5 Packs

  • Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT.
  • Bulkhead Fitting Type: Push In Straight Male Connector.
  • Body:Nickel Plated Brass Seal, O-Ring NBR.
  • Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property.
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently.
  • Fluid Admitted: Air, Vacuum, Water (No Freezing).
  • Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC.
Check Stock

General Tools Hose and Tubing Cutter #115 - Cuts up to 2 Inch Flexible Rubber, PVC, ABS and Polyethylene Tubing

  • CUTS RUBBER TUBING: Cuts up to 2-inch rubber hose or tube..
  • CUT PE OR ABS PIPE: Cuts up to 1-1/2 inch PE and ABS pipe..
  • CUTS PVC PIPE: Cuts up to 1-1/4 inch PVC pipe..
  • HOLDS TIGHT: The curved holder supports the hose or tubing during square cuts..
  • LONG HANDLES: Long handles for added leverage..
Check Stock

Twinkle Star Sewer Jetter Kit for Pressure Washer -100 ft Hose, 1/4 Inch NPT, Drain Cleaning Hose, Button Nose & Rotating Sewer Jetting Nozzle, Orifice 4.0, 4.5, 5.5, 4000 PSI

  • [Pressure Washer Sewer Jetter Kit]: The water jet drain cleaner can be used to remove indoor or outdoor drainage of many types, combined with any type of pressure washer, can easily flush obstacles and maintain flow. 1 x 100 FT Pressure Washer Hose, 3 x Button Nose – Orifice 4.0, 4.5, 5.5, 1 x Rotating Nozzle, 1 x M22-14 Solid Brass, 1 x Thread Seal Tape, 1 x 1/4 ” Quick Connector..
  • [Durable Plumbing Jetter Hose]: Small outside diameter flexible and strong toughness sewer line hose with couplings, allowing hose and nozzles to fit through sewer line. PE tube, PVC cover, Dual-layer terylene reinforcement, which is very durable and can resist weather,oil, ozone and abrasion..
  • [3 + 1 Sewer Jetter Nozzle]: 3 Button Noses, 1 front jet at 0° to clear the blockage in the pipe, 3 rear jets at 33° pushes forward and washes loose debris before. Orifice: 4.0, 4.5, 5.5. Rotating Nozzle rotates 3 rear jets at 33° for shot blasting, the water unblock pipe, clear and flush debris. Orifice: 4.5..
  • [Widely Used]: Work with lots electric and gas-powered pressure washers up to 4,000 PSI. The sewer jetter hose can be used for pressure washer pump with American standard M22-14 Solid Brass. It also can be connect to trigger gun or pressure washer wand with 1/4&#....
Check Stock

SharkBite 1 Inch Ball Valve, Push to Connect Brass Fitting, Water Shut Off, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 22223-0000LFA

  • INSTALLS IN SECONDS: Requires no special tools, no soldering, no crimping or glue.
  • COPPER, PEX, CPVC, PE-RT: Brass SharkBite Ball Valve plumbing fittings fit Copper, plastic PEX tubing, CPVC and PE-RT Pipe and connects them in any combination.
  • PERFORMANCE: SharkBite shutoff valves are are heavy duty and certified to sustain a pressure of 200 PSI and 200 degrees Fahrenheit.
  • QUALITY: Only SharkBite's quality and performance is field-proven.
  • PREFERRED BY THE PRO: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

GLANT Misting System Misters for Patio Misting System 33FT Misting Line 11Brass Mist Nozzles Brass Adapter for Patio Garden Umbrellas Greenhouse Trampoline

  • Misitng Nozzle Kits Including: misting nozzle 12pcs,mist seat 10pcs, 1 plug and 20 cable ties.
  • Usage: suitable for any outdoor space, mainly refrigeration, greening, humidification, air purification,and also including self-made low pressure greenhouse, outdoor cooling system, courtyard spray system, swimming pool edge, game area balcony, deck, porch and so on, this is a summer necessities..
  • Mist Kits: The necessary parts of the spray system are simple, convenient, time-saving and labor-saving, and ideal outdoor products..
  • Parameters of accessories: stainless steel hole of brass nozzle is equipped with self sealing O-ring.
  • it can only be used for 1 / 4 "PE food grade pipe, sliding lock, pushing fast, and thread UNC 10-24.
  • Pressure: 29-43.5psi at atmospheric pressure, maximum working pressure: 30bar (450psi).
Check Stock

SharkBite 3/4 x 3/4 Inch Ball Valve with FNPT Connector, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 22186-0000LF

  • INSTALLS IN SECONDS: Requires no special tools, no soldering, no crimping or glue.
  • COPPER, PEX, CPVC, PE-RT: Brass SharkBite Ball Valve plumbing fittings fit Copper, plastic PEX tubing, CPVC and PE-RT Pipe and connects them in any combination.
  • PERFORMANCE: SharkBite shutoff valves are are heavy duty and certified to sustain a pressure of 200 PSI and 200 degrees Fahrenheit.
  • QUALITY: Only SharkBite's quality and performance is field-proven.
  • PREFERRED BY THE PRO: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

General Tools Ratcheting Pipe and Tubing Cutter #119 - Cuts PVC, CPVC, PEX, ABS and Polyethylene Tubing or Pipe from 1/8-Inch to 1-5/8-Inch

  • The General Tools and Instruments 119 PVC Cutter, 1-5/8" makes quick work of PVC, PE and ABS pipe from 1/8" to 1-5/8" in diameter.
  • The cutter's eight-click ratcheting mechanism allows you to maximize grip pressure on the pipe for a smooth, clean cut.
  • The tool also has a recess on the face for performing angle cuts.
  • High carbon steel blade maintains sharpness and resists chipping.
  • ergonomic handle is designed for comfort.
Check Stock

SNS JSC1/4-N02 1/4\Tube OD x 1/4 NPT 90 Degree Elbow Air Flow Control Valve Push to Connect Fitting Speed Control Valve(10 PCS)

  • Made of high-quality plastics and nickel-plated copper for durable use.
  • Type:Air Flow Control Valve Speed Control Valve.
  • Advantages: convenient installation and disassembly, good sealing performance. Gas flow rate can be controlled.
  • Operating Pressure: 0-0.9Mpa,Proof pressure:1.32Mpa.
Check Stock

3/8 Air Fittings Push to Connect Fittings,CEKER 3/8 Inch Tubing Od x 3/8\ NPT Thread Male Pneumatic Fittings Air Line Fittings Quick Connect Push in Connectors 5Packs

  • Type:3/8" Od x 3/8" NPT Male Push to Connect Fittings.
  • 3/8 inch Tube Air Fittings Fluid Admitted: Air, Water (No Freezing).
  • 3/8 Quick Connect Fittings Working Pressure:0-1.0mpa | 0-150psi.
  • 3/8" od tube Pneumatic Fittings Applicable: Pipe PU/ PA/ PE/ PVC.
  • Working Temperature: 0-60°C | 32～140°F.
  • Push to connect air fittings 3/8 is made of Nickel Plated Brass and quality plastic- corrosion resistance, ductility.
Check Stock