Spears 1429 Series PVC Tube Fitting Coupling Schedule 40 Gray 3/4 x 1/2 Barbed
- Fitting connects to schedule 40 PE pipe on both ends.
- PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
- Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
- Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check StockSpears 1435 Series PVC Tube Fitting, Adapter, Schedule 40, Gray, 2" Barbed x NPT Female
- Adapter for connecting pipes or fittings of different types.
- Fitting connects to schedule 40 PE pipe on one end and has an NPT female connector on the other.
- PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
- Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
- Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stockuxcell PVC Barb Hose Fitting Connector Adapter 16mm or 5/8
- APPLICATION.The adapter’s barbed fitting creates a tight seal on flexible PE pipe when used with a hose clamp (sold separately)..
- ADVANTAGE.An O-ring is delivered to the end of each joint thread, eliminating the need for a sealant or raw tape.
- HIGH QUALITY MATERIAL. made of PVC ,have Alkali resistance, high temperature resistance, corrosion resistance, strong anti-aging, high strength, no break..
- -30 degree to 100 degree F temperature range..
- BARB HOSE FITTING.has a male National Pipe Thread (G) thread on one end and a barbed insert on the other.
- Size: 16mm or 5/8″ Barb x 3/4″ G Male.
Check Stock
Disconnect Tongs Tool with Depth Gauge and Pipe Deburring Tool Combination Set for Push to Connect Fittings Removal Tool for Disconnect Clamp for 1/2",3/4",1" Plastic PEX CPVC Copper Pipe Fittings
- 【Package Includes】1 pcs disconnect tongs tool.
- 1 pcs deburr &gauge tool .the disconnect tongs have 3 size teeth available, can easily remove the push fit fitting from pex, cpvc or copper pipe of 1/2 inch, 3/4 inch or 1 inch.it can deburr the cut end of the pipe & bevel the cut edge, ensure complete seal and smooth connection..
- 【Quality Material】the push to connect fittings removal tool is made of 40cr steel and tpr coated grips prevent slippage in wet conditions and one-handed operation for in-tight situations.good grips, hefty build to allow your free hand the ability to assist in the removal of fittings..
- 【Deburr and Gauge Tool】 deburring tool is made of lightweight and durable pvc.ideal for marking pipe depth and deburring..deburring tool is compatible with 1/4 to 1 inch sized pex, copper, cpvc, pe-rt and sdr-9 hdpe pipe.
- 【Fast Disconnection】 simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly. deburring pipe and depth gauge tool, easy measure insertion depth and deburring pipe after pipe is inserted..
Check StockMUNTE - SS304 Stainless Steel Female Threaded 3 Way Tee T Pipe Fitting 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" BSP Threaded (1")
- Pipe Fittings and Tools include: Pipe fittings,copper pipe fittings, black iron pipe fittings, water pipe fittings, stainless steel pipe fittings, cpvc pipe fittings, iron pipe fittings, ABS pipe fittings, RV pipe fittings, Pipe fitting tools, PVC pipe fittings, PE pipe fittings..
- Metal pipe fittings, Stainless steel pipe fittings, Socket, Female socket, Male socket, Wye, Tee 90, Elbow 90, Elbow 45, Reduced valve, Female elbow 90, Male elbow 90, Reduced tee, Reduced bush, cleanout, End Cap, PVC solvent cement, Clamp saddled, Flange, Steel backing ring, Adaptor, P trap with cleanout plug, Gasket, Valve.
- Products are well manufactured, durable and have a long life, easy to disassemble and move during use..
- Excellent quality, fast delivery, good after-sales. We promise to do everything in our power for you to be 100% satisfied.
Check StockSharkBite 1/2 Inch Clamp Ring, Pack of 100, Stainless Steel Plumbing Fitting, PEX Pipe, PE-RT, UC953CP100
- EASY INSTALLATION: Slide the 1/2 in. clamp ring over the pipe, push the pipe onto the fitting and squeeze with your clamp tool.
- COMPATIBILITY: Use with brass or poly PEX crimp fittings, PEX or PE-RT pipe and clamp tool.
- QUALITY: SharkBite's quality and performance is field-proven and is the only push-to-connect brand than can ensure a clean, leak-free connection.
- PREFERRED BY THE PRO: All SharkBite products meet the same standards for commercial and residential plumbing applications.
Check StockBulkhead Union Push to Connect Tube Fitting 3/8 In Tube OD Stainless Steel Double Threaded 5 Packs
- Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT.
- Bulkhead Fitting Type: Push In Straight Male Connector.
- Body:Nickel Plated Brass Seal, O-Ring NBR.
- Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property.
- Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently.
- Fluid Admitted: Air, Vacuum, Water (No Freezing).
- Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC.
Check StockPATIKIL Hose Barb Fitting Elbow 8mm Barbed M14x1.5 Male Thread 2 Pack Carbon Steel Pipe Adapters Connectors for Air Water Fuel Oil Gold
- Overall Size: 46 x 35mm / 1.81 x 1.38 inch (L*W).
- Advantage: Carbon steel material features high strength, high pressure, and high-temperature resistance. Leakproof comes with 2 washers for good sealing performance.
- Instruction: The thread-to-barb pipe fitting is commonly used to connect pipes such as air, gas, water, oil, and fuel in a quick and simple way..
- Application: The thread-to-barb pipe fitting is a coupling for joining 2 diameter sizes pipes in different directions. Can be used with PE, nylon and PU tubing in industrial environments, for many fluids.
- Notice: Please confirm the correct size before ordering. You can dip the end of the tubing/hose in hot water for a while for push-on installation easily.
Check StockHoneywell Natural Gas Permasert Version 2.0 Stab Coupling - 1 CTS - PN PC50103
- Product: 1" CTS Stab Coupling Permasert Version 2.0 P/N: PC50103.
- Details: 1-1/8" OD, 0.090/0.099/0.102 wall.
- Fits line size: 1" inch CTS PE Tubing (1-1/8" Outer Diameter).
- Used on Medium Density (yellow) PE Polyethylene plastic pipe for repairs or joining lengths together. Works for Natural Gas (NG) or Propane (LPG).....
- IMPORTANT NOTE: There are various pipe sizes described as 1 Inch. This for CTS pipe not IPS pipe. These are different pipe sizing standards, so please....
Check StockSNS SPV-1/2 1/2\ Tube OD Union Elbow Plastic Push to Quick Connect Tube Fitting(10 PCS)
- Made of high-quality plastics and brass for durable use.
- Advantages: Easy installation and disassembly, good sealing performance.
- Operating Pressure: 0-0.9Mpa,Proof pressure:1.32Mpa.
Check StockSNS SPU-1/4 1/4\ Tube OD Plastic Straight Union Pipe Tube Fitting Straight Pneumatic Connector(10 PCS)
- Made of high-quality plastics and brass for durable use.
- Advantages: Easy installation and disassembly, good sealing performance.
- Operating Pressure: 0-0.9Mpa,Proof pressure:1.32Mpa.
Check Stock1 CTS Elster Natural Gas Permasert Line Chamfering Tool Version 2 PN 58504
- Line size: 1 inch CTS Poly Pipe (1-1/8" Outer Diameter) *Please review sizing diagram..
- Creates a proper O.D. and I.D chamfer which prevent seal damage when stabbing of the PE piping into New 2.0 Permasert couplings. REQUIRED to properly....
- IMPORTANT NOTE: There are various pipe sizes described as either IPS or CTS. These are DIFFERENT pipe sizing standards with different OUTER and....
Check StockSpears 1436 Series PVC Tube Fitting Adapter Schedule 40 Gray 1-1/2 Barbed x NPT Male
- For use in connecting NPT pipe to schedule 40 PE flexible tubing in a straight run.
- Barbed fitting creates a tight seal on flexible tubing when used with a hose clamp (sold separately).
- Maximum working temperature of 140 degrees F.
- PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
- Meets ASTM D2609 standards for plastic insert fittings and NSF 61 certified for use with potable water.
Check Stock
