Reviews Pci e To Sata Card

Benfei 15 Pin SATA Power Y-Splitter Cable 8 Inches - 2 Pack

  • Y-SPLITTER SATA CABLE powers two Serial ATA HDD, SSD, optical drives, DVD burners, and PCI cards to a single connection on a computer power supply.
  • Snug-fitting drive SATA connector and channel guides on the power supply connector provide a secure connection that won¡¯t accidentally disconnect.
  • UPGRADE COST SAVER SATA power cable spares the expense of upgrading an existing power supply to connect a new SATA drive.
  • Cost-effective 2-Pack provides spare SATA extension power cables for new installations or repairs..
  • DIY or IT installers both appreciate the convenience of sharing a PSU connection when installing new internal components like a DVD burner.
  • 8 inch cable harness (not including connectors) provides sufficient length for internal cable management in most configurations.
  • HEAVY DUTY SPLITTER with 2 SATA 15 pin female connectors and 1 SATA 15 pin male is constructed with flexible 18 AWG conductors for reliable performance when connecting two SATA hard drives to a power supply.
  • Supports 3.3V, 5V, and 12V power voltages between SATA I, II, III drives and power supply connections without any degradation of performance.
  • COMPATIBLE with popular SATA equipped devices such as: Apricorn Velocity Solo x2 Extreme Performance SSD Upgrade Kit, Asus 24x DVD-RW S....
Check Stock

5 Slot M.2 B-Key SATA Base SSD PCI-e 3.0 x2 Bandwidth Expansion Card Require x16 Slot SI-PEX40142

  • Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card )..
  • Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
  • The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
  • You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
  • SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..
Check Stock

NFHK 2 in 1 Combo Mini PCI- E 2 Lane M.2 NGFF & mSATA SSD to SATA 3.0 III Adapter Converter PCBA

  • 2 in 1 Combo Mini PCI- E 2 Lane M.2 NGFF & mSATA SSD to SATA 3.0 III Adapter Converter PCBA, 2.5" SATA SSD Form Factor : 98 x 65.5mm.
  • M.2 (NGFF) & mSATA to SATA III Module, Build in Mini PCI-e 52pin Female connector, Build in M.2 (NGFF) B key Female connector, Insert both M.2 & mSATA....
  • PCI Express M.2 Spec. Revision 0.7, Version 1.0, PCI Express Mini Card Electromechanical Spec. 1.2, PWM synchronous buck converter Power IC.
  • 3A maximum output current, Short circuit protection, In-rush current suppression, Thermal shutdown protection, ESD HBM (Human Body Mode)/2KV.
  • the MSATA and NGFF SSD cannot work at same time. The adapter only work for B-key or B/M-key socket NGFF SSD, cannot work for M-key socket..
Check Stock

LIANSHU 3Pack 6 Pin PCI-e to SATA Power Cable - 8 Inches

  • LIANSHU 6 Pin PCI-e to SATA Power Cable - 8 Inches ,SATA15Pin M To 6Pin HSG.
  • Cable material: ULStandard. 18 AWG Full 100%Copper.
  • PCI EXPRESS VIDEO CARD POWER CABLE Adapter Connects A PCIe Video Card To A Power Supply With A Spare SATA Power Connection,PSU UPGRADE SAVER Power Cable Provides An Option For A Power Supply Without A PCIe Connection For GPU Power..
  • HSG 6 Pin PCIe To 15 PIN SATA Female To Male Cable Provides A Convenient Solution For Low Power Video Graphics Card That Can Be Powered From A Single SATA Power Connection.STURDY GRAPHICS CARD Power Cable Has A Male SATA Connector With Keyed Rails And A Female PCI Connector With A Latch For A Secure Connection On Each End To Prevent Accidental Disconnections.
  • VIDEO GRAPHICS CARD Compatible With Graphics Cards From Popular Manufacturers From ASRock, ASUS, EVGA, And Gigabyte.
Check Stock

ACASIS PCIe SATA Card, 8 Port with 8 SATA Cables and 2 Power Splitter Cables, SATA 3.0 Controller Expansion Card with Standard Profile Bracket, 6Gbps PCI-E X1 Host Controller Card Up To 80TB Expansion

  • Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card )..
  • Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
  • The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
  • You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
  • SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..
Check Stock

Cable Matters 2-Pack 15 Pin SATA to 4 SATA Power Splitter Cable - 18 Inches

  • SATA splitter cable powers up to four Serial ATA HDD, SSD, optical drives, DVD burners, and PCI-E cards from a single connection to computer power supplies.
  • Snug-fitting drive SATA power cable clicks into place on your power supply to provide a secure connection that prevents accidental disconnection.
  • Upgrade cost saver SATA power splitter cable spares the expense of upgrading an existing power supply to connect new SATA drives.
  • Cost-effective 2-pack provides a spare power cable for new installations or repairs.
  • Keep a spare in your IT toolkit or at the test bench.
  • DIY or pro installers both appreciate the convenience of sharing a PSU connection when installing new internal components like a DVD burner.
  • 18 inch cable harness has 4 SATA drive receptacles spaced at 4.5 inch intervals.
  • Provides sufficient length for internal cable management to minimize airflow impact in most configurations.
  • Hdd power cables have 4-SATA 15 pin female receptacles and 1-SATA 15 pin male plug at one end.
  • Constructed with flexible 18 AWG conductors for reliable performance when connecting four SATA hard drives to a power supply.
  • Supports 3.3V, 5V, and 12V power voltages between SATA I, II, III drives and power supply connections without any degradation of performance.
Check Stock

PCI 32 BIT Riser Card with Flex Crypto Mining Cable

  • PCI 32 BIT Riser Card with Flex Cable. 1-slot PCI 32 bits/5V 66MHz riser card with 6" flexible cable..
  • Authentic only if sold by Micro SATA Cables..
  • Categories: Drive Adapters, Drive Converters, PCI & PCI-E Products, PCI / PCI-E Cards.
Check Stock

Cablecc USB 3.0 to SATA 22pin 2.5 Hard Disk to 2 in 1 Combo Mini PCI- E 2 Lane M.2 NGFF & mSATA SSD Adapter Converter

  • USB 3.0 to SATA 22pin 2.5" Hard Disk to 2 in 1 Combo Mini PCI- E 2 Lane M.2 NGFF and mSATA SSD Adapter Converter.
  • The item included one cable and one PCBA..
  • Build in Mini PCI-e 52pin Female connector.
  • Build in M.2 (NGFF) B key Female connector.
  • Insert both M.2 and mSATA SSD on the PCBA,M.2 SSD is the first priority.mSATA won't work. Support SATA Reversion 3.2.
  • PCI Express M.2 Spec.Revision 0.7, Version 1.0 PCI Express Mini Card Electromechanical Spec.1.2 PWM synchronous buck converter Power IC 3A maximum output current Short circuit protection In-rush current suppression Thermal shutdown protection ESD HBM (Human Body Mode)/2KV Note: The adapter only work for B-key or B/M-key socket, cannot work for M-key socket..
Check Stock

SATA Power Cable 3 Pack SATA 15-Pin to 6-Pin PCI Express Card Power Cable Adapter 8 Inch

  • Sata Power Cable Usage: Use one of the SATA power connectors on the power supply to add a Sata 15-pin to 6-pin adapter that allows you to use the SATA power cable to power the video card inside the computer. Provides a cost-effective way to connect the PCI-E video card to the serial SATA power connector provided by the computer power supply..
  • Connector: 15-pin SATA male connector, and 6-pin female PCI Express card power adapter.
  • Cable material: 6 Pin PCI-e to SATA Power Cable 18 AWG Full Copper.
  • Standard length: The SATA power cable has an 8-inch (20 cm) long connector, and the Sata 15-pin to 6-pin adapter is ideal for internal cable management..
  • Safe connection: Connecting the SATA power cable can reduce the risk of damaging the internal connectors that are difficult to connect and unplug, and can also reduce the tension on the SATA drive or the connector of the computer motherboard.
Check Stock

fosa PC Front Panel Internal Card Reader, Media Multi-Function Dashboard USB 3.0 Port Support M2 SD MS XD CF TF Card for Computer, Fits any 5.25\ Computer Case Front Bay

  • The front panel media dashboard is made of durable ABS material and etched on surface. It is stable with high speed and safety. It is anti-rust and hard to be scrapped.
  • 2 USB3.0 HUB (HOST), transfer speed up to 5.0Gbps, downward compatible with USB2.0 and USB1.1 built-in PCI-E interface (no need to purchase the USB3.0 PCI-E card) , as long as your motherboard has PCI-E interface will be able to your computer in one step to upgrade to USB 3.0.
  • Front interface: e-SATA port, the transfer speed up to 3.0Gbps, Front port: power 12V/5V output (SATA 15PIN Power Interface) standard round 4PIN turn to 15PIN power cable directly to the SATA hard drive power supply.
  • audio ports, front speakers, and microphone to solve the inconvenience of your chassis behind the plug.
  • More than 1 card reader, support SD / MMC / CF / MD, the MS / XD, TF / M2 series storage memory card.
Check Stock

BEYIMEI PCIe 4X SATA Card 6 Ports,SATA III 6 Gbps Controller Expansion Card, ASM1166/SATA 3.0 Non-Raid,with 6 SATA Cables, (Support 6 SATA 3.0 Devices)

  • * Simple to Use : NO Driver required Plug and play, support 2.5 inch solid state drive, 2.5 inch mechanical hard drive, 2.5 inch Blu-ray drive, 3.5 inch mechanical hard drive, 3.5 inch Blu-ray drive, etc. It is widely applied as start-up disk, support hot swappable..
  • * SATA 3.0 & PCIE V3.0 : Support SATA transfer rate: SATA 3 (6Gbps), SATA 2 (3Gbps), SATA 1 (1.5Gbps). Compliant with PCI-Express specification V3.0 and backward compatible with V2.0. PCI-Express X4 interface, and compatible with PCI-Express X4/X8/X16 slots(recommended to use under PCI-E 3.0, faster)..
  • * 6 Ports Adapter Card --- You could add 6 6Gbp/s SATA 3.0 devices to your computer with this PCIe SATA card.(4X bidirectional bandwidth theoretical speed up to 8GB/S) ,Support Intelligent Sleep - If you do not operate the computer for 3 minutes, the hard disk will enters an automatic sleep mode , and will automatically activates when rewriting data..
  • * Multiple Operating Systems Support : Adopt imported solution ASMedia ASM1166/SATA3 solution. It can support multiple operating systems:Compatible with Windows / 8 / 10 / synology /Ubuntu /Linux..
  • *Package includes 1 * PCIe SATA 3.0 controller card , 6 * SATA cable and 1x 15pin SATA power splitter cable,1* Standard Profile Bracket,1* Low Profile....
Check Stock

StarTech.com 4 Port PCI Express 2.0 SATA III 6Gbps RAID Controller Card with HyperDuo SSD Tiering - PCIe SATA 3 Controller Adapter (PEXSAT34RH)

  • Add 4 Internal SATA III (6Gbps) Ports to a computer through a PCI Express x2 slot.
  • PCI Express 20 SATA Controller with HyperDuo SSD Tiering.
Check Stock

Syba Dual M.2 M-Key NVMe Ports to PCIe 3.0 x16 Bifurcation Riser Controller - Support Non-Bifurcation Motherboard (SI-PEX40129)

  • Add 2 external or internal SATA 6 Gbps ports to a computer through a PCI Express slot.
Check Stock