Reviews Pcb Soldering Tools

Helping Hands Soldering, Toolour Magnetic Helping Hand for Soldering, 4 PCB Circuit Board Holder and Flexible Helping Arms, Third Hand Tool with Heavy Duty Base for Electronic Repair Hobby Craft

  • Helping Hands Soldering: Circuit Board Holder has 4 pillars, each pillar is magnetic, adjustable magnetic helping hands can be positioned anywhere on the heavy steel base, which can support any shape of the board. Completely free your hands and let you focus on the soldering detail work once start using our excellent third-hand soldering tools..
  • Magnetic Helping Hand Tool: 4 flexible metal gooseneck arms with strong magnetic base, which have a powerful attraction to the steel base. We included two 9.8″ arms, two 5.9″ arms helping hand arms, completely free your hands up and work easier than ever before. The 360° rotating alligator clip allows you to be more flexible in welding work..
  • Magnetic PCB Holder Pillars: 4 small pillars can hold a PCB board by their multi-layer or tips through the location hole component point. Full metal body is anti-rust and corrosion-resistant, powder-coated promises a longer usage. To make sure the PCB you worked on can be positioning steadily, the pillars’ tips are better to hold boards by 4 location holes..
  • Stainless Steel Base: 9″ x 5. 9″ heavy duty base with industrial-grade weighted construction, never tip over, powder-coated iron base. 4 pcs rubber feet prevent the stable soldering station from sliding ....
Check Stock

HPYNPES DIY Practical Soldering Practice Kit Practice Learning Electronics Training Board

  • Product introduction: Shake the lucky turntable by NE555 and CD4017 chips combined with LED random output function. The control terminals are button control and vibration switch control. You only need to press the button or shake it, the LED will start to rotate, and the After a while it stops randomly, leaving only one LED light..
  • Designed for Beginners：Special design for electronics starter to learn to solder electronics components. Soldering project kit will improve your electronic knowledge and soldering skills in practice.
  • Easy to Assemble： Electronic DIY kits uses safety materials, effectively avoid corrosion and wear out. Components’ names have been marked on the PCB board and the circuit design is simple. Even beginners can easily solder successfully.
  • Warm Reminder ：DIY electronic components kit requires buyer to assemble and welding, If you don't have any soldering experience, please read the soldering instructions and use soldering tools carefully to avoid safety problem.
Check Stock

AmScope - Adjustable Circuit Board Holder and Clamping Kit PCB Holder Frame - Single Pack - 1 Piece

  • Adjustable printed circuit board holder (PCB) holds objects in place for soldering, repair or inspection functions.
  • Wide base with rubber feet creates a solid and safe work platform.
  • Spring-loaded clamp holds objects up to 7 ¾” wide (198 mm) securely in place.
Check Stock

Soldering Iron Kit - Soldering Iron 60W Adjustable Temperature, Digital Multimeter, 5pcs Soldering Tips, Solder Wire, Stand, Desoldering Pump, Solder Wick, Tweezers, Paste [110V US Plug] from Plusivo

  • Complete Soldering Iron Kit with Multimeter – necessary tools that are widely used for soldering projects, home DIY fixing jobs, electrical, electronics and appliance repairs, circuit board welding, other do-it-yourself solder applications, crafts/jewelry making and other uses.
  • Premium Quality Components with safety features – high quality soldering iron, stand, multimeter and all other accessories.
  • soldering iron with heat-resistant cap and grip, digital multimeter with all-around protection and stand function.
  • Bonus Accessories – 20+ extra items such as pen-shaped screwdriver, desoldering pump/solder sucker, solder, tweezers, wire stripper and cutter, mini screwdrivers, mini PCB, heatshrink tubes and more plus a downloadable ebook.
  • Durable and Convenient Carry Bag – assorted tools come handy in a durable easy-to-carry PU bag.
  • keeps all the components organized, easy to carry, store and transport anywhere.
  • everything you wanted in a home DIY package.
  • Satisfaction Guarantee – every purchase is backed by the manufacturer’s 30-day money-back / replacement guarantee and lifetime customer support, ensuring the customers’ high level of satisfaction.
Check Stock

Soldering Iron Kit - Soldering Iron 60 W Adjustable Temperature, Solder Wire, Tweezers, Soldering Iron Stand, Soldering Iron Tips Set, Desoldering Pump, Solder Wick, Heatshrink Tubes [110 V, US Plug]

  • Soldering Iron Kit for many applications – necessary tools for soldering projects, home DIY fixing jobs, electrical, electronics and appliance repairs, circuit board welding, for home DIY hobbyist in crafts and jewelry making and many more uses.
  • Premium Quality Components with safety features – high quality soldering iron, stand and all other accessories.
  • soldering iron with adjustable temperature knob (200℃ - 450℃), 5pcs replaceable tips, heat-resistant cap and grip for maximum protection.
  • Bonus Accessories – more than 15 extra items such as desoldering pump/solder sucker, tin wire solder tube, tweezers, mini wire stripper, mini screwdrivers, mini PCB, heat shrink tubes and more plus a downloadable ebook.
  • Durable and Convenient Carry Bag – assorted tools come handy in a durable easy-to-carry PU bag.
  • keeps all the components organized, easy to carry, store and transport anywhere.
  • everything you wanted in a home DIY do-it-yourself package.
  • Satisfaction Guarantee – every purchase is backed by the manufacturer’s 30-day money-back / replacement guarantee and lifetime customer support, ensuring the customers’ high level of satisfaction.
Check Stock

TOMLOV DM602 HDMI Digital Microscope with 3 Lens, Soldering Microscope with 10.1 Inch Screen, LCD Coin Microscope Full View, 2K Video Microscope for Adults, Biological Slide Microscope, 64GB

  • ...ystem, including lens A for error coin inspection, lens L for circuit board microscope, and lens D for biological slide observation. With three cameras and different focal ranges, it provides a wider field of view, allowing for surveying from different angles.
  • 【 Enhanced Soldering Lens L - View PCB Board with Larger Working Range 】Lens L of Tomlov smd soldering microscope has a long focal length (3.5"-7.5"), enabling users to perform work or manipulate large items with an extremely large working distance, eliminating concerns about accidentally crashing soldering irons or tools into the microscope for pcb soldering.
  • 【 Basic Coin Lens A - Inspect Coins from Details to Full View 】The Tomlov DM602 10.1" coin microscope with lights for error coins can capture a coin in full detail. Upgraded with special Lens A and a longer 10-inch stand, it's easy to get a full view of dime, penny, nickel, quarter, dollar, and even the large silver dollar directly on this coin magnifier for error coins..
  • 【 Special Biological Lens D -Get Ready to Witness the Miniature Marvels of the World 】Equipped with1500x biolo....
Check Stock

2900 pcs SMD 1206 0805 0603 Component Assortment Resistor Capacitor Diode Transistor OpAmp IC Solder PCB SMT Soldering Assorted Kit

  • Huge SMD 1206 0805 0603 Components Assortment, 2800 pcs SMD kit.
  • 1600 pcs Resistor, 520 pcs Capacitor, 180 pcs Transistor, 200 pcs Diodes, 100 pcs Zener, 13 pcs OpAmp, 16 pcs IC, 75 pcs LED.
  • Everything comes in a compact case and very handy.
  • 13 pcs Trim Pots, PCB adapter, SMD Soldering Tip, 0.4mm Solder, Tweezers, Training PCB.
  • Includes a training dummy PCB with 70 components, practice your soldering skills.
Check Stock

10 Pieces No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance

  • Nice combination: you will get 5 no clean soldering flux pens and 5 solder remover wick sets, 10 in total, sufficient quantity, thoughtful combination, to meet daily use and replacement needs.
  • Appropriate size: the no-clean solder wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, and liquid flux brush flux pen is about 15 x 1.5 cm/ 6 x 0.6 inch, convenient to hold.
  • Please check the size carefully before purchasing.
  • Multiple reliable materials: these no-clean braided soldering wicks are made of quality copper wire, using nice weaving technology, which can enhance surface tension and absorb excess solder.
  • And flux remover pen adopts quality material, non-leakage, flux safe and prevents you from being exposed to organic solvents.
  • Practical tools: soft brush tip flux pen releases a moderate stream of liquid to clean components without spoiling the PCB copper foil or IC pins.
  • Solder remover has good thermal conductivity and absorption, helping to reduce the risk of thermal spoiling to the board.
  • Broad utilization: these flux pens and braided solder wicks can be applied in laboratories, computers, home repairs and to correct small PCB errors and through-hole joints, electronic soldering and much more, bringing a lot of convenience and effic....
Check Stock

U.S. Solid 60W Soldering Station Digital Solder Iron Station Kit with 392°F-896°F Temperature °F /°C Switch Auto Standby & Sleep Temperature Lock 5 x Additional Soldering Tip

  • ✅【12-IN-1 SOLDERING STATION KIT】: The soldering kit includes 1x80W Soldering Iron Station, 5x Soldering Tips, 1x Wire Holder ,1x Solder Wire, 1x Metal Sponge , 2x ESD-Safe Tweezers ,1 x Operation manual, you will get the full kit in the picture..
  • ✅【HIGH POWER & HIGH PRECISION】: The upgraded soldering station is with 80W high power output, fast heating up, and takes only 6 seconds to reach the solder wire melting point of 572°F. Wide working temperature range: 176°F ~ 896°F / 80°C ~ 480°C. The new generation ceramic heating core solved the fast aging and wide temperature change issue. High precision temperature stability(±2°F) gives you more safety to aid in overheating..
  • ✅【AUTO STAND BY &SLEEP FUNCTION】When not used for 10 minutes, the soldering station will automatically switch to standby mode with STB showing on display, when not used for 20 minutes, it will automatically switch to sleep mode with SLP on display. Adjusting the knob or pressing the button to get back to normal working mode. Come with LED screen display function to show temp and different modes..
  • ✅【CERTIFICATIONS & SAFETY】: Safety is one of the most important features we considered during design.The soldering station is FCC, CE, RoHS certified. Also with f....
Check Stock

Soldering Mat Silicone Work Mat Heat Resistant Reach 932°F Protect Work Pad Board Table From Burning Fit For Phone, Computer, Watch, Repairing Soldering Station Assembly Electronics Heat Gun (13'X 9')

  • Heat Resistant & Electronic Work Mat: This silicone work mat can resist 932°F, place it on Rework Station Equipment when desoldering and soldering chips on PCB,Considering production environment of various chips, Really a good tool choice for repair working to avoid damage on wood desk or maintenance platform and increase working environment..
  • Good Silicone Soldering Mat for Small Projects: This soldering mat is widely used for soldering and welding, electronics circuit assembly or electronics and circuit board repair, for example smart phone, laptop, computer, sports watch, camera, smart toy, eyeglasses etc soldering or repairing electronics or even cleaning of guns..
  • Easily to clean and Flexible and convenient to store: This silicone workbench mat is easy clean with soap and water or even rubbing alcohol. To store just need roll it up and be put in a drawer without deforming..
  • Gift For Techie: A good choice for refurbishment of mobile phone and chips (Motorola phone and Quallcomm chips), this silicone soldering mat is a perfect electronics mat for smartphone tablet, PC,even watches or other electronic instruments repairing etc..
  • Flexible use in your daily life: Accompany with heat gun, soldering iron, hair straightener,flat iron,curling iron,heat tabl....
Check Stock

TOWOT Solder Wick & Desoldering Pump, 6 PCS Different Desoldering Wick & Solder Sucker-Desoldering Vacuum Pump Solder Remover

  • Solder Sucker with Super Suction: With a desoldering pump designed with a double ring and a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up and pressing the button with one hand..
  • 7-in-1 Solder Set: 6 pcs different copper solder braid is made of copper and rosin geometrically accurate braiding when it is heated, it can quickly absorb and melt to remove excess solder, avoiding short circuits, size (2.0mm,1.5m.
  • 3.0mm,1.5m), Suction Pump Size (length: 21cm)..
  • High-Quality Materials: The desoldering vacuum pump is made of high-quality ABS material, coated with a sponge, non-slip and heat-absorbing, nylon nozzles, anti-static and heat-resistant. Comfortable grip and durable..
  • Widely Used: Desoldering wicks and desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc. To meet your various soldering needs..
  • Value Package: 7-in-1 soldering package, commonly used soldering tools, improve your work efficiency. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!.
Check Stock

TOWOT Desoldering Pump Solder Sucker,2PCS Desoldering Vacuum Pump Solder Remover Tool

  • Solder Sucker with Super Suction: With a desoldering pump designed with a double ring and a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up and pressing the button with one hand..
  • High-Quality Materials: The desoldering vacuum pump is made of high-quality ABS material, coated with a sponge, non-slip and heat-absorbing, nylon nozzles, anti-static and heat-resistant. Comfortable grip and durable..
  • Widely Used: Desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc. To meet your various soldering needs..
  • Best assistant: Solder pump adopts high-efficiency tin scraping method, which is easy to remove tin debris from the suction nozzle and not easy to block. The solder sucker can be used for both broad and small places, hard to reach areas..
  • Value Package: 2PCS desoldering pump , commonly used soldering tools, improve your work efficiency. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!.
Check Stock

TOWOT Desoldering Pump Solder Sucker,3PCS Desoldering Vacuum Pump Solder Remover Tool

  • Solder Sucker with Super Suction: With a desoldering pump designed with a double ring and a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up and pressing the button with one hand..
  • High-Quality Materials: The desoldering vacuum pump is made of high-quality ABS material, coated with a sponge, non-slip and heat-absorbing, nylon nozzles, anti-static and heat-resistant. Comfortable grip and durable..
  • Widely Used: Desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc. To meet your various soldering needs..
  • Best assistant: Solder pump adopts high-efficiency tin scraping method, which is easy to remove tin debris from the suction nozzle and not easy to block. The solder sucker can be used for both broad and small places, hard to reach areas..
  • Value Package: 3PCS desoldering pump , commonly used soldering tools, improve your work efficiency. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!.
Check Stock