Reviews Pcb Prototype Small

4X Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY

  • Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY..
  • PCB Dimension: 101.6mm x 53.34mm / 4" x 2.1".
  • PCB Thickness: 1.6mm / 0.063", Material: high quality FR-4 glass fiber PCB..
  • All holes are plated through. Top and bottom side are identical copper layers. Pads grid (pitch) 2.54mm / 0.1", hole diameter 0.9mm..
Check Stock

Miuzei PCB Board Prototype Kit for Electronic Projects Circuit Solder Double-Side Board with 40 Pin 2.54 mm Male to Female Headers Connector 2P&3P Screw Terminal Block Solder Flux Solder Wire

  • ⭐【6 Different Sizes PCB Boards】Double Sided Prototype PCB Boards--1 × 9*7cm, 2 × 8*6cm, 5 × 8*2cm and 5× 7*5cm, 5 × 7*3cm, 5 × 5*4cm PCB....
  • ⭐【Convenient for Projects】The upgrate 0.8mm....
  • ⭐【Header Connector】6 pcs 40 pin Male Header, 4 pcs 40 pin Pitch Right Angle Male Headers, 6 pcs 40 Pin Female Header.
  • ⭐【Screw Terminal Block】8 Pcs Screw Terminal Block: 6 pcs 5.08-301-2P and 6 pcs 5.08-301-3P.
  • Pitch: 5.08mm, Rated Voltage: 300V, Rated Current:....
  • ⭐【High Quality & Warranty】Durable Glass Fiber-FR4 Material (Thickness 1.6mm) is A Very Solid and Durable Prototype Circuit Board.
Check Stock

Purse Organzier Bag Organizer with Metal Zipper Large Beige

  • ★32 pieces double sided PCB prototype boards well packed in a plastic tray which is very easy to store and take out.
  • ★5 different size boards to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects.
  • ★4 mounting holes at the corners of the board are very convenient for installing them together..
  • ★Pre-tinned plated holes on the board make it very handy to solder components and sensors for your projects.
  • ★High quality of durable glass fiber –FR4 material with 1.6mm thickness makes a very solid and sturdy prototype circuit board.
Check Stock

ELEGOO 32 Pcs Double Sided PCB Board Prototype Kit for DIY Soldering with 5 Sizes Compatible with Arduino Kits

  • ★32 pieces double sided PCB prototype boards well packed in a plastic tray which is very easy to store and take out.
  • ★5 different size boards to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects.
  • ★4 mounting holes at the corners of the board are very convenient for installing them together..
  • ★Pre-tinned plated holes on the board make it very handy to solder components and sensors for your projects.
  • ★High quality of durable glass fiber –FR4 material with 1.6mm thickness makes a very solid and sturdy prototype circuit board.
Check Stock

EPLZON Gold Plated PCB Solder-able Breadboard for DIY Electronics Projects Compatible with DIY Arduino Soldering Projects 2.05"x3.5" (5 Pack + 2 Mini Board, Black)

  • ✅This board is especially useful for preserving a prototype or experiment you just created on a solder-less breadboard by soldering all the pieces in place..
  • ✅Suitable for a variety of MCU boards, compatible with Arduino Nano, ESP8266, NodeMCU, etc.
  • suitable for various DIP type components.
  • suitable for any type of Raspberry Pi GPIO breadboard PCB..
  • ✅Gold plated finish to prevent oxidation, high quality gold finish for easy soldering,and all holes are through-plated for mounting strength.
  • ✅5pcs 2.05"x3.5" PCB Solder-able Breadboard + 2pcs 2.0"x1.5" mini PCB Solder-able Breadboard for prototyping and transferring,Black.
  • ✅Lead-free and RoHS compliant for longer shelf life.
Check Stock

Cermant 20PCS 15x18cm Bakelite Prototype Board PCB Printed Circuit Board for Soldering Electronics Project Experiment for Arduino DIY Electronics Experiments (5pcs 15x18cm)

  • Pcb prototype board, the proto boards are in the color of Red.
  • Material: 94HB Bakelite Prototyping Board.
  • FEATURES - The proto boards are thick and single sided. The plated holes are pre-coppered and very solid which make them very easy to solder components on..
  • PACKAGE CONTENT - 5pcs x Universal PCB Board.
Check Stock

Electronics-Salon Prototype Screw/Terminal Block Shield Board Kit for Arduino MEGA-2560 R3.

  • Prototype Screw/Terminal Block Shield Board Kit For Arduino MEGA-2560 R3..
  • FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm..
  • Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm..
  • Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs )..
Check Stock

Gikfun Large Solder-able Breadboard Gold Plated Finish Proto Board PCB DIY Kit for Arduino GK1008

  • It is the Large Gikfun Solder-able Breadboard.
  • This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces in place.
  • Gold plated finish prevents oxidation, High quality Gold finish for easy soldering.
  • All holes are through-plated for strength.
  • Pack of 3PCS, Breadboard PCB for any type Raspberry Pi GPIO.
Check Stock

Gikfun Solder-able Breadboard Gold Plated Finish Proto Board PCB DIY Kit for Arduino Pack of 5PCS GK1007

  • This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces in....
  • Breadboard PCB for any type Raspberry Pi GPIO.
  • Gold plated finish prevents oxidation, High quality Gold finish for easy soldering.
  • All holes are through-plated for strength.
  • Adaptable with a variety of MCU boards. Compatible with Arduino Nano, Pro Mini, NodeMCU, etc..
Check Stock

DEYUE 40PCs PCB Double-Sided Prototyping PCBs Circuit Boards Kit | 5 Size Universal untraced Perforated Printed Circuits Boards | Solder-able Circuit Protoboards for DIY Soldering Electronic Projects

  • 100 % SATISFACTION GUARANTED  ★  Excellent quality and an empty canvas for electrical enthusiasts! An easy soldering.
  • 0.1" hole spacing for DIP integrated circuits and headers..
  • THIS IS NOT YOUR NORMAL PERF BOARD!  ★  This board is much higher quality with plated-through-holes and annular rings that will not lift off the PCB under normal soldering conditions.
  • MUTI-PURPOSE ★ General purpose prototyping circuit board for analog and digital use.
  • Double sided board with plated-thru holes allows components to be easily soldered to either side of the board.
  • THE FLEXIBILITY OF HAVINg CHOICES  ★  Great assortment with variety of size and perfect for quickly prototyping stackable circuits.
  • PACKAGE COMPONENT  ★  40 Piece of double sided PCB prototype board in 5 different size (2x8 and 3x7 each 10 Pcs.
  • 7x9 cm each 4 Pcs) with mounting holes or slots on each board corner.
Check Stock

BOJACK 6 Vaules 40 Pcs Double Sided PCB Board Prototype Kit for DIY Soldering with 6 Sizes Compatible with Arduino Kit

  • BOJACK high quality 6 Vaules 40 Pcs Double Sided PCB Board Prototype Kit.
  • The product contains six different sizes of circuit boards of circuit boards2*8CM,3*7CM,4*6CM,5*7CM,6*8CM,7*9CM.different size boards to meet your....
  • 4 mounting holes at the corners of the board are very convenient for installing them together..
  • Using high-quality and durable glass fiber FR-4, high-quality and firm..
  • Widely used in electronic experiments and point-to-point DIY IoT projects..
Check Stock

KEYESTUDIO 10PCS Proto Shield for Arduino Mega, Double Sided PCB Prototype Shield Solderable for Arduino Mega R3 2560

  • Good Value PCB Diy Kit-contains 10 pieces prototype circuit boards and comes with a beautiful box.
  • Perfect size for arduino mega board-seamlessly plug it into the mega board with the pin headers and 4 mounting holes at the corners.
  • High Quality-solid and sturdy glass fiber FR4 material proto boards, thick and double sided.
  • Very Convenient-clear yellow pin labels and pre-tinned plated holes on board make you easily solder components and sensors for your projects without mistakes.
  • Hole-pitch: 2.54mm/ 0.1inch, Hole-diameter: 1mm/ 0.04 inch, allowing easy attachment of medium sized wire.
Check Stock

Gikfun Mini Solderless Breadboard 400 Tie-points + 2xPCB Solder-able Breadboard + 2.54mm 10Pin Jumper Wires Male to Male DIY Kit for Arduino EK8473

  • This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces in place..
  • 1 x Mini Solderless Breadboard 400 points, Size:8.3cm x 5.5cm..
  • 2 x PCB Solder-able Breadboard, Gold plated finish prevents oxidation, High quality Gold finish for easy soldering. All holes are through-plated for strength..
  • 10Pin 2.54mm Male to Male Jumper Wires Male to Male, 20CM..
Check Stock