Reviews Pcb Pcm Li ion Protection

New 2 x Rechargeable 10440 AAA 3.7V Li-ion Battery

  • 600mAh Li-Ion Rechargeable batteries with PCB.
  • These batteries are NOT regular AAA batteries and can only be used in devices that specifically accept high voltage 10440 batteries.
  • Built-in protection circuit module (PCB) increases length of battery by ~2mm.
  • Includes two quad battery storage cases to safely and securely store and protect your batteries.
  • US based seller dedicated to the highest standards of quality and service.
Check Stock

10440 Button Top 600mAh 3.7V Li-Ion Demonfire Protected Rechargeable Battery 6 Pieces

  • 600mAh Li-Ion Rechargeable batteries with PCB.
  • These batteries are NOT regular AAA batteries and can only be used in devices that specifically accept high voltage 10440 batteries.
  • Built-in protection circuit module (PCB) increases length of battery by ~2mm.
  • Includes two quad battery storage cases to safely and securely store and protect your batteries.
  • US based seller dedicated to the highest standards of quality and service.
Check Stock

Smart USB Lithium Battery Charger 1A Fast Charging for 18650 26650 32650 14500 18500 17335 3.7 4.2V Rechargeable Lithium Batteries Single Slot

  • ...at input 5V/2A, and output 4.2V/1A (1000mAh, others are normally 500mAh and slower than this charger) to charge a Li-ion battery. The design of input from Micro USB port can be compatible with either a mobile device or car charger port..
  • SAFE CHARGER: The Li-On lamp charger was featured overcharge and over discharge protection, short circuit protection, smart identification of damaged batteries and battery reverse polarity protection. We adopted high quality PCB and meal parts to ensure long life of charger..
  • QUCK CHARGING: Portable and convenient design to support global USB directly charging. With output of current at 1A, the flashlight charger is high speed to make charging faster than normal..
  • INDICATOR & SMART CHARGER: When the indicator is RED, it means no battery installed into the charger or it is charging.
  • make sure you put the battery in position and it contacts with charger. Automatically detects the battery type and start charging or stop charging.
  • no need extra setup to charge a 3.6V battery or 4.2V battery. This charger will protect your battery when it's full charged no matter how long you will leave the battery in the charger..
Check Stock

EBL AA Battery 1.5V AA Lithium ion Batteries 3300mWh High Capacity with Micro USB Cable, 2 Hours Quick Charge USB AA Rechargeable Batteries 4 Packs

  • ...uded 4 in 1 cable. Build-in LED light shows the charging process, red light on means charging, blue light means fully charged..
  • Protected AA Lithium Batteries: Designed for a safe operation with PCB protected chip, supports multiple safety features, including over-charge, over-discharger, over-heat and short-circuit protection. Note: These batteries CAN NOT be used for constantly high current draw products, the batteries will auto shut off if the discharge current higher than 2A because of over-current protection..
Check Stock

EPOCH AA Battery 1.5V AA Lithium ion Batteries 3450mWh High Capacity with Micro USB Cable, 2 Hours Quick Charge USB AA Rechargeable Batteries 4 Packs

  • ...uded 4 in 1 cable. Build-in LED light shows the charging process, red light on means charging, blue light means fully charged..
  • Protected AA Lithium Batteries: Designed for a safe operation with PCB protected chip, supports multiple safety features, including over-charge, over-discharger, over-heat and short-circuit protection. Note: These batteries CAN NOT be used for constantly high current draw products, the batteries will auto shut off if the discharge current higher than 2A because of over-current protection..
Check Stock

18V 5.0Ah 4.0Ah 3.0Ah Replacement Battery Plastic Case for Milwaukee 18V M18 M18B 48-11-1820 48-11-185048-11-1828 48-11-10 Li-ion Battery Cover Part

  • Li-ion Battery Plastic Case M18 Shell Charging Protection Circuit Board For Milwaukee 18V M18 48-11-1815 3Ah 4Ah 5Ah PCB Board.
  • only have Circuit Board(PCB) Plastic Case ,Screw, Spring (NO BATTERY).
  • Completely protection and replacement for original Battery.
  • Designed 100% compatible and easy to repair the broken circuit board.
  • Quick-responding technical support for free.
Check Stock

ACEIRMC 5pcs 4A 2S 18650 Lithium Protection Board BMS Li-ion Battery Lipo Cell Charger Protection Module Overcharged Overcurrent Protection 7.4V 8.4V

  • Upper Limit Operating Current:4A.This protection board uses a lithium photopolymer rechargeable battery protection IC..
  • Built-in high-precision voltage detection circuit.
  • The terminal connected to the charger is a high withstand voltage device.
  • Built-in three-stage overcurrent detection circuit (overcurrent 1,overcurrent 2,load short circuit)..
  • 4A BMS 2S 2 Cell Series Li-ion 18650 Lithium Battery Charger Protection Board 7.4V DIY Kit Electronic PCB Board Module.
  • Function:Overcharge protection,over discharge protection,short circuit protection,overcurrent protection..
  • Package included: 5 x 2S 4A 18650 Lithium Protection Board..
Check Stock

Battery 2 Pack and USB Rapid Travel Charger for Sony Cybershot DSCQX10 DSCQX30 DSCQX100 Smartphone Attachable Lens-Style Camera

  • USB Charger : Ultra Thin Only 0.6in,lim and portable design, easy to carry, Charger Anywhere Anytime to Use..
  • Multiple Charging Option: the Ability to Charge With a USB Wall Charger, Car Charger, Portable Power Source, or External Battery .Gives you More....
  • Newest Generation of CPU Control, IC Chip, Double PCB Panel, Built With Multiple Circuit Protection ( Over-Charging,Over Current, Over Voltage,....
  • Micro Input: DC 5V+/-5%,Output: DC 4.2V +/-0.05v, 600mAh (MAX)..
  • Long Life Replacement Lithium-ion (Li-ion) Battery 100% Decoded and 100% Compatible with the Original Cameras and Chargers, No Memory Effect..
Check Stock

TAYUZH [3950mAh] Google Pixel XL Battery Upgraded Li-Polymer Battery B2PW2100 Replacement for HTC Google Pixel XL (5.5 inch) Nexus M1 with Screwdriver Tool Kit

  • ...Safe and Efficient】 Each battery made from new high quality Lithium polymer battery cell connector PCBA. Each battery cell is tested by our staff using capacity testing tools, which can guarantee high capacity and highly efficient PCB to match original standards.All of our batteries have highest level of security protections:over charging protection, overheating protection, over load protection, short circuit protection, highly effective temperature control, battery cell PTC protection..
  • 【Compatible model】This Replacement battery Compatible with for : HTC Google Pixel XL 5.5 " G-2PW2200 Nexus M1. Battery Type: Li-ion, Voltage: 3.8V, Battery Capacity:3950mAh /15.01Wh.We promise that our product is brand new high quality product..
  • 【Warm Tips】Please notice that use up all the power of battery for the first three times before charging, and then take a full charge, thus the battery can be reached the optimum effect of using. Please remember that its full performance and longevity is only achieved after 3 to 5 complete charge and discharge cycles..
  • 【Worry-free Warranty】We provide 24-hour quick reply, 30-Day Money Back. If you have any questions about this battery, please feel free to contact us and we will spare no effort to solve your problem..
Check Stock

DVT4110 Voicetracer Digital

  • 8 GB Built-in memory and memory card slot.
Check Stock

Battery Pack and LCD USB Travel Charger for Sanyo Xacti VPC-CG10 VPC-CG20 VPC-CG21 VPC-CG100 VPC-CG102 Camcorder

  • New High Quality Lithium-ion Replacement Battery, High Energy Density, High Recycle Life, Long Life Battery.
  • Long Life Replacement Lithium-ion (Li-ion) Battery 100% Decoded and 100% Compatible with the Original Cameras and Chargers, No Memory Effect..
  • Multiple Charging Option: the Ability to Charge With a USB Wall Charger, Car Charger, Portable Power Source, or External Battery .Gives you More....
  • Newest Generation of CPU Control, IC Chip, Double PCB Panel, Built With Multiple Circuit Protection ( Over-Charging,Over Current, Over Voltage,....
  • 12-Month Manufacturer Warranty and Easy-to-Get Customer Service. Any....
Check Stock

Organizer 2pcs 4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board with Balance for Drill Motor 14.8V 16.8V Lipo Cell Module

  • Multiple Protections: Over-discharge protection, overcurrent protection, overcharge protection.
  • LOW STANDBY CURRENT: MOS transistor can control the battery charge and discharge, low standby current consumption..
  • Applications:It is suitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium....
  • 4S 40A 16.8V Li-ion Lithium Battery Protection Board PCB BMS Charger Protection Circuit Balance Charging Module for Drill Motor Motorcycle Battery.
Check Stock

3S 12V 40A PCB BMS Protection Board for 18650 Li-ion Lithium Battery Cell Module

  • This protection board is suitable for 3 series 3.7V 18650 li-ion cell..
  • The protection board is for cell Li-ion batteries, it can be used for ternary batteries, manganese acid batteries and cobalt acid batteries..
  • Support overcharge protection,overdischarge protection,overcurrent protection and short circuit protection..
  • This protection board is suitable for 3 series 3.7V 18650 Li-ion cell.Charging connector and discharging connector are separated..
  • Stable charging and discharging the various protection features such as precise overcharge protection,overdischarge protection,overcurrent protection....
Check Stock