Reviews Pcb Mount

TECSEE Coral Switches for Mechanical Gaming Keyboards PME Nylon Tactile stem | Standard 68g Gold Spring | Plate Mounted | SMD 5 Pin RGB Switches for Backlit Keyboard (Tactile 35PCS)

  • Zealio V2 switches come in 4 variants. They are rated at "bottom out" force, not actuation! Version 2 of our switches feature a bigger tactile bump when compared to our previous Zealios..
  • 62g - Transparent, PCB Mount [Tactile, non-clicky].
  • 65g - Transparent, PCB Mount [Tactile, non-clicky].
  • 67g - Transparent, PCB Mount [Tactile, non-clicky].
  • 78g - Transparent, PCB Mount [Tactile, non-clicky].
  • 62g Zealio - Smooth, crisp and light, a bit heavier than MX Browns in weight, but offer a much smoother experience with a crisper and large tactile bump feedback when compared to Holy Pandas. Lightest variant Zealio..
  • 65g Zealio - Smooth, long, drawn out tactile bump from the top. Nice cushion during bottom out..
  • 67g Zealio - "Crisp & responsive" tactile bump feeling at the very top with more cushion during bottom out than 65g Zealio V2..
  • 78g Zealio - For those that prefer a slightly lighter MX Clear, but want a bigger and smoother bump than MX Clears / Holy Pandas. Tactile bump is round and snappy at the very top. From beginning to end, the spring is heavier than all other Zealio variants..
Check Stock

Gateron V2 Clear Stabilizers PCB Mount Screw in Stabilizer Customized Distance No Dropping Wire for Mx Mechanical Keyboard PCB (Gateron Stab V2 Clear 1+4)

  • This is Gateron PCB Mount Screw In Crystal Stabilizer，.
  • Package Included：1x6.25u +1x7u +4x2u PCB Mount Screw-in Stabilizers + pad + Screws For 60% 68 75 84 87 Keyboard.
  • The plastic inserts and boat only has 10 pcs each. There is extra wire presented, but no plastic insert boat presented.
  • If your keyboard is 96 or 104 108 layout,need to buy 2 set.
  • This stabilizers are PCB screw-in stabilizers which is directly mounted on PCB.V2 stabilizers is designed to prevent the wire from dropping off.It's more stable than old edition..
Check Stock

YMDK Aluminum Brush Finish ANSI Anodized Positioning Board Plate Plate-Mounted for GH60 PCB GK61 GK61x Hot Swap PCB

  • Package Included: 1x plate.There is no screws and copper stand included..
  • Pls note: Original GK61 GK61x GK61xs plastic case can't use this plate directly.Need to replace a GH60 compatible case.
  • This plate is anodized brush finished.It can only use with plate mounted stabilizers.
  • If you use with GK61 /GK61x PCB,can just mount 4-5 switches into the plate corner and then plug to PCB socket totally.After the plate PCB fixed,then mount other switch in 1 by 1 is ok.At last screw plate PCB togehter to GH60 size case is ok with the screws in your case..
Check Stock

Prototype Screw Terminal Block Shield Board Kit MEGA-2560 R31

  • FLEXIBLE USE---Without assembled, the prototype screw terminal block shield board allows you to try variety mount methods, so that you can use it flexibly.
  • COMPACT STRUCTURE---With compact structure, the prototype screw terminal block shield board is made up of screw terminal block, high quality PCB carrier, FR-4 glass fiber PCB.
  • RICH COMPONENTS---The prototype screw terminal block shield board includes prototype PCB, terminal blocks, and female header sockets, satisfying your working needs.
  • LONG SERVICE PERIOD---Made of high quality of material, and with delicate workmanship treatment, the prototype screw terminal block shield board has long serving life, practical and economic.
  • EXCELLENT AFTER SALE SERVICE---Except the premium product we provide, we also provide considerate after sale service. Please contact us for any problem about our product. It is our pleasure to service you.
Check Stock

1769-OA16 Compact Ac I/o Output Module in Stock New in Box 1 Year Warranty

  • Taiwan DINKLE fireproof nylon material DIN rail mount carrier(not China low quality carrier), can support width 35mm, 32mm and 15mm rail..
  • Matching PCB Thickness 1.6mm to 2.0mm (recommended 2.0mm)..
Check Stock

ZugGear V2 PCB Mount Screw-in Stabilizers Translucent Smokey Gold Plated 2u 6.25u 7u Keycap Stabilizers Mechanical Keyboard Stabilizers (DUROCK V2 Smokey 60/87 Kit)

  • DUROCK V2 PCB Mount Stabilizers are with NEW Non-Stripping Wire Design, fits for MX-compatible PCBs..
  • The V2 Outer Casing wire holding clasp made to prevent stripping of the wires, different from regular Cherry PCB mount stabilizers and others..
  • Translucent Smokey housings and the Golden Wires set gives your board a clear and golden edge..
  • Polymer Nylon outer Casing-- Higher Hardness, Gold-plated Stainless Steel Wires and Screws-- Oxidation Resistance..
  • Pre-clipped Insert method, no need to clip the feet. Fit for 60% and 80% Keyboard Set. ( Washers, 6.25u and 7u Wire included ).
Check Stock

ZugGear V1 Translucent Smokey Gold Plated PCB Screw-in Stabilizers 2u 6.25u 7u Keycap Stabilizers Mechanical Keyboard Screw Stabilizers DUROCK V1 Smokey 60/87 Keyboard Set

  • 1. DUROCK PCB Mount Stabilizers are designed for MX-compatible PCBs..
  • 2. Translucent Smokey housings and the Golden Wires set gives your board a clear and golden edge..
  • 3. The outer casing and parts, specifically made to prevent stripping of the threads, different from regular Cherry PCB mount stabilizers..
  • 4. Polymer Nylon outer Casing-- Higher Hardness, Gold-plated Stainless Steel Wires and Screws-- Oxidation Resistance..
  • 5. Pre-clipped Insert method, no need to clip the feet. Fit for 60 Keyboard Set,87 Keyboard Set and 104 Keyboard Set. ( Both 6.25u and 7u Wire....
Check Stock

Homyl Transparent Gold Plated PCB Screw-in Stabilizers 2U 6.25U Keycap Stabilizers for MX Mechanical Keyboard Cherry 1 Set Replacement - Pink 1 6.25u 7 2U

  • * Pre-clipped Insert method, no need to clip the feet. Fit for 104/108 Keyboard Set. ( 1pc 6.25u 7pcs 2U Wire included ) / Fit for 61 Keyboard Set and 87 Keyboard Set. ( 1pc 6.25u and 4pcs 2U ).
  • * PCB Screw-in Mount Stabilizers are designed for MX-compatible PCBs..
  • * Polymer Nylon outer Casing :Higher Hardness, Gold-plated Stainless Steel Wires and Screws-- Oxidation Resistance..
  • * The outer casing and parts, specifically made to prevent stripping of the threads, different from regular Cherry PCB mount stabilizers..
  • * Transparent housings and the Golden Wires set gives your board a clear and golden edge..
Check Stock

DUROCK V2 PCB Mount Screw in Stabilizers, Translucent Smokey Keyboard Stabilizers with 2u 6.25u 7u Wires, Keycap Stabilizers Mechanical Keyboard Stabilizers (V2 Smokey 60/87 Kit)

  • DUROCK V2 Stabilizers are PCB mount screw-in Stabs that feature a patent design and precision upgrade models to avoid wire drop out..
  • The V2 Stabs Stem / Sliders are pre-clipped design, do not require any clipping for fast & easy set up..
  • Well selected Premium Polymer Nylon housings, all the Stainless Steel Wires and hardware are sourced from Korea and with real gold coating..
  • Translucent Smokey V2 housings and the gold-plated Wires set gives your board an elegant and golden edge..
  • DUROCK Stabilizers V2 Compatible with PCBs that use "screw-in" or "PCB Mount" stabilizers. ( Washers, both 6.25u and 7u spacebar Wire included ).
Check Stock

Asceny Plate Mount Stabilizers for Mechanical Keyboards No Numpad Kit

  • Designed to fix the rattling nature of other plate-mount stabilizers..
  • Achieve results that were previously only possible with PCB mount keyboards while maintaining the ease of use and assembly of the plate-mount design..
  • High quality polymer nylon injection and gold-plated wires..
  • No-clips design, there is no need to cut anything..
  • Includes four pieces of 2-U, one piece of of 6.25-U, and one piece of 7U..
Check Stock

Extruded Aluminum Enclosure Kit Silver for Ham It Up v1.3 RF Upconverter for NESDR and RTL-SDR radios

  • High-quality custom aluminum enclosure for Ham It Up v1.3.
  • Metal case helps to protect PCB from stray EMI, improving sensitivity..
  • Includes all required hardware to mount your PCB!.
  • Ample room inside the case to make modifications and even include a dongle inside the case if you are so inclined..
Check Stock

Extruded Aluminum Enclosure Kit Blue for Ham It Up v1.3 RF Upconverter for NESDR and RTL-SDR radios

  • High-quality custom aluminum enclosure for Ham It Up v1.3.
  • Metal case helps to protect PCB from stray EMI, improving sensitivity..
  • Includes all required hardware to mount your PCB!.
  • Ample room inside the case to make modifications and even include a dongle inside the case if you are so inclined..
Check Stock

Electronics-Salon DIN Rail Mount Screw Terminal Block Adapter Module, for Arduino UNO R3.

  • DIN Rail Mount Screw Terminal Block Breakout Board for Arduino MKR. With the breakout board, you can easily extend Arduino MKR projects to industrial control applications..
  • PCB mount Terminal Block: pitch 5.0mm/0.197.
Check Stock