Reviews Pcb Holding

ZugGear V2 PCB Mount Screw-in Stabilizers Translucent Smokey Gold Plated 2u 6.25u 7u Keycap Stabilizers Mechanical Keyboard Stabilizers (DUROCK V2 Smokey 60/87 Kit)

  • DUROCK V2 PCB Mount Stabilizers are with NEW Non-Stripping Wire Design, fits for MX-compatible PCBs..
  • The V2 Outer Casing wire holding clasp made to prevent stripping of the wires, different from regular Cherry PCB mount stabilizers and others..
  • Translucent Smokey housings and the Golden Wires set gives your board a clear and golden edge..
  • Polymer Nylon outer Casing-- Higher Hardness, Gold-plated Stainless Steel Wires and Screws-- Oxidation Resistance..
  • Pre-clipped Insert method, no need to clip the feet. Fit for 60% and 80% Keyboard Set. ( Washers, 6.25u and 7u Wire included ).
Check Stock

Samior TS105 Titanium Folding Scalpel Knife, Mini Slip Joint Utlitly EDC Keychain Knife with 10 replacable Blades, Craft Working, Box Opening, Light Daily Use Knives

  • Titanium Handle: 6AL4V titanium material, rustproof and corrosion resistant to acid and base, comfortable holding..
  • Small EDC knife for everyday carry. Length closed: 2.4".
  • Utility and Sharp: Replaceable #11 stainless steel Scalpel blade to meet your different needs and versatile situations, from PCB circuit board, mobile phone film, soft wood, paper to simply opening box..
  • Exquisite Workmanship: High precision CNC machining body and ergonomic design for comfortable holding..
  • NON-LOCKING, with no locking mechanism holding blade open, blade held open by resistant pressure. (NOTE: When you want replaceable the blade, only when the blade at unlock angle, then push the blade out.).
Check Stock

AEDIKO 50pcs CR2032 Vertical Button Cell Battery Sockets 3 Pin Holder Case Plastic Shell Type Black

  • 50pcs CR2032 Coin Button Cell Holder,Fits CR2032 Button Cell (Battery is NOT Included).
  • Body Size: 23 x 18 x 5mm / 0.9" x 0.7" x 0.2"(L*W*H).
  • Two Negative Leads, and One Positive Lead,Easy to Connect to the Pin Connector.
  • Vertically Mounted,Easy to Insert or Remove, Holding the Battery in Place Firmly.
  • Ideal Accessories for DIY Project or Other Electric PCB Board.
Check Stock

Yellow Sanwa LB35 Balltop for JLF Joysticks

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

V Cut Groove PCB Separating Separator Cutting Machine Sub Board Machine 110V Can Achieve The Desired Cutting Effect

  • 【High reliability】The products has high reliability,easy to operate,high safety factor.
  • 【Unique shape】Unique contoured shape,Good-looking and practical..
  • 【Free operation】Set the cutting stroke and speed..
  • 【High Security】The guiding plate can effectively ensure the safety of the person during cutting and the quality of the workplace.
  • 【Easy to Use】The operator can achieve the desired cutting effect by holding the PCB by hand during the cutting process.
Check Stock

Arcade Fight Stick Street Fighter Arcade Joystick Keyboard control Fighting box PXN X8 For Nintendo Switch/PS4/PS3/XBOX Series X/S/XBOX S/X,PC

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

4X Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY

  • Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY..
  • PCB Dimension: 101.6mm x 53.34mm / 4" x 2.1".
  • PCB Thickness: 1.6mm / 0.063", Material: high quality FR-4 glass fiber PCB..
  • All holes are plated through. Top and bottom side are identical copper layers. Pads grid (pitch) 2.54mm / 0.1", hole diameter 0.9mm..
Check Stock

Zorveiio 50 Pcs PCB Board Mounting Feet with Screws, PCB Spacer Kit PCB Feet Plastic PCB Standoffs for Arcade Gaming Board Console Motherboard

  • 【Premium Material】Our pcb board mounting feet are made of high quality insulating plastics, which is sturdy, strong enough and durable in use. Such reliable plastic spacer can stay firmly on PCB Board, good insulation with long service life..
  • 【Pacakge & Suitable Size】 You will receive 50pcs L type pcb feet and 100pcs mounting screws (Each foot comes with 2 pieces screws). Each pcb standoff measures approx. 0.8" x 0.8"/21.2mm x 20.3mm, can secure the board tightly. Sufficient enough for you to satisfy using and replacing daily needs..
  • 【Widely Usage】Our plastic pcb feet are suitable for PCB packaging and stacking applications. Specially for fixing gaming boards, game console motherboard, video board, arcade gaming board ect and work well. Serve as ideal replacement hardware parts and offer you much convenience in your daily life..
  • 【Easy to install】 These pcb spacer kit is easy to install and use, you just need to tighten mounting screws in a breeze, will not need a lot of labor. It can secure the circuit board to other surfaces effortlessly..
  • 【100% Risk-Free Shopping】 Zorveiio's products are backed by incredible customer service to make sure your satisfaction is guaranteed. If you have any other questions about it, please do not hesitat....
Check Stock

Gardner Bender GSW-26 Electrical Door Switch, SPST, Normally On- Mom OFF, 16 A/125V AC, (Repl. for GSW-SK)

  • Tealio switches come in 1 variant. The spring weight is rated at "bottom out" force, not actuation! Our Tealio switches have been tweaked with wobble reduction and improved smoothness compared to regular Gateron linears..
  • 67g - Transparent, Light Teal-Blue Stem, PCB Mount [Linear].
  • Please note that PCB mounted switches can still be used in many plate mounted keyboards. As long as your PCB underneath has 2 extra holes next to the center post, it will support PCB Mounted switches and add extra rigidity to your build. If your PCB does not have the extra holes, then you can simply cut the small plastic legs off to make them Plate-Mount!.
Check Stock

GK61 GK61x RGB Hot Swap Independent Driver Tyce-C ANSI Replacable Space Cherry MX Switches Mechanical Keyboard DIY Kit Case Plate PCB

  • Package Included:Case + Feet + Screws + GK61 Hot Swap PCB + Alu Plate + USB Cable + Switch Removal Tool.
  • Pls note:The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place..
  • The chipset is MCU 32 bit,8M Flash,3 pcs 256*256*256 RGB drive to support full 16.8 million RGB..
  • PCB has RGB presoldered,it's under per switch.PCB RGB can support by music..
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again..
Check Stock

Eightwood Aluminum Electronic Enclosure, HiFi Audio Amplifier Ham Radio Project Box, PCB Board Case Black - 4.33 x 2.99 x 1.81 inch (LWH)

  • Well Made: Heavy duty extruded aluminum construction, professional sandblast/matte anodized finish.
  • Built-in slots/grooves are for holding PCB or circuit boards.
  • The sliding cover design allows the top part of the extrusion slides smoothly, easy to access inside to mount parts or components.
  • Color:Black | External dimension:4.33 x2.99 x1.81 inch /110x76x46mm (LHW) | interior dimension:4.33 x2.52 x1.69 inch/110x64x43mm (LWH).
  • Application: Electronic projects like switch/converter, power supply units, audio amplifier projects, ham radio projects,etc.
Check Stock

AAwipes Cleanroom Swabs (100pcs, 3.2mm Head Width Spear Shape Pointed Tips, Blue) Multi-Purpose Cleaning Swab Sticks with Lint-Free Microfiber Tips for Inkjet Printer, Camera, Lens

  • ... 100-1000 Cleanroom, the Microfiber detailing swabs exhibits low particles and ion content, free from silicone and amide..
  • 【Excellent Compatibility with Solvents】These cleaning swab sticks have excellent compatibility with most known solvents including alcohol and acetone. It has excellent absorbency and solvent-holding capacity for easy cleaning..
  • 【Multi-Purpose】Swabs are also great to clean firearm as gun cleaning swabs, or to clean inkjet printer head as Inkjet Printer cleaning swabs, or to cleaning optical instruments like camera and optical Lens, or to cleaning elctronics, e.g. PCB board cleaning swabs or hard disc swab, or used in scientific labs as lab swabs, or in garage doors, cars, music instruments like bass or piano, or to use as cleaning swabs for keyboards and smart phones, and for Roland Optics..
Check Stock

GK64 GK64x Keyboard kit CNC Wood Wooden Case Wired PCB Plate Stabilizers Walnut Wired PCB

  • Package Included: CNC Case + Feet + Screws + GK64x PCB + Plate + Plate stabilizers.
  • CNC Wood Case and the stabilizers is Genuine plate mounted stabilizers.
  • Built-in microphone under spacebar, support External sound source play.
  • The plate is FR4 plate which more soft and silent.You need to attach plate with PCB by switches.Install 4-5 switches to plate then to PCB socket at....
Check Stock