Reviews Pcb Connector

uxcell 17pcs DIP IC Chip Socket Adaptor Round 28 Pin 2.54mm Pitch Dual Row 15.24mm Row Pitch

  • Row to Row Distance(Approx):15.24mm/ 0.6".
  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

Pieces 4 Pin LED Light Strip Connectors Set Including Screw Fixing Clips, 4 Pin LED Connectors, Cuttable T, L and X Shape PCB Board for SMD 5050 RGB LED Strip Lights Gapless Solderless Connector

  • Working condition: these LED light strip connectors are able to stand up to 4A current and 0 - 24V (5V, 12V, 24V) voltage, the heat resistance level is -20℃ - 100℃, so they are suitable for most non-waterproof 4 pin SMD 5050 RGB lights in 0.39 inch/ 10 mm width.
  • Note: you should pay attention to use them correctly for ensuring safety and extending service life.
  • Cuttable PCB board: the PCB board is cuttable, so you can use a cutting tool to cut T-shaped, L-shaped and X-shaped PCB board into any shape you want to facilitate the connection of various forms of light strips.
  • Just use your imagination to DIY a special light strip.
  • Please cut the LED strip according to the cuttable mark when you want to change the shape of PCB board.
  • Simple to install: the LED strip connector clip can be easily opened and closed, you can quickly slide RGB strip into the connector clip without any tool, please make sure connector + - polarity in line with + of strip before you connect it.
  • Wide range of usages: the 5050 LED strip connectors are suitable for standard density strips or DIY LED lights, for corner connection, and able to decorate Christmas trees, parties, birthdays, weddings, parties and other scenes according to your own needs.
Check Stock

GK64 GK64x Keyboard kit CNC Wood Wooden Case Wired PCB Plate Stabilizers Walnut Wired PCB

  • Package Included: CNC Case + Feet + Screws + GK64x PCB + Plate + Plate stabilizers.
  • CNC Wood Case and the stabilizers is Genuine plate mounted stabilizers.
  • Built-in microphone under spacebar, support External sound source play.
  • The plate is FR4 plate which more soft and silent.You need to attach plate with PCB by switches.Install 4-5 switches to plate then to PCB socket at....
Check Stock

DaFuRui Screw Terminal，60Pack 5MM Pitch 2 Pin and 3 Pin PCB Connector Mount Breadboard Screw Terminal Block Connector for Arduino (2 Pin-50PCS, 3 Pin-10PCS)

  • ★【Excellent Quality】100% brand new and high 2 Pin and 3 Pin PCB Mount Screw Terminal Block Connector.
  • ★【Powerful function】The terminals can be spliced. There are various combinations.Two Size of 2 pin and 3 pin for you to choose.
  • ★【Standard sizes】Rated Value : AC 300V, 16A, Pitch : 5mm/0.2"，For wire size: 14-22AWG，Contact resistance: 20mΩ.
  • ★【Good Material】ABS Plastic, Electric Parts，Color:Blue，Reeds are phosphor bronze nickel-plated, stainless steel screws are M2.5.
  • ★【Package Content 】60Pack 5MM Pitch 2 Pin and 3 Pin PCB Connector，2 Pin-50PCS, 3 Pin-10PCS Terminal Block Connector.
Check Stock

OLLGEN Auto Car OBD2 16 Pin Connector 16 Pin Male Connector Adapter Standard 16 Pin Male Plug OBD Shell OBDII PCB Diagnostic Tool Blue

  • Male Adapter with PCB: It can connect circuit board or weld line with PCB board.The shell is easily four inches long, plus a spring strain relief. you....
  • The soldier pads inside the shell do not have all the pins broken out, but you can just solder to the pin connections directly for odd pin outs. Note....
  • Used to build a breakout box:Lots of cars do not have 16 pin connector,such as some old cars. However now lots of diagnose tool is 16 pin connector,so....
  • Notice:It is just a small connector,do not have any accessory or software.Has a circuit board you could tack connections..
  • Package Include:Standard 16Pin Male Plug x 1.
Check Stock

FDSF USB 3.1 Type C to Type C Extension Cable 90 Degree FPC FPV Ribbon Flat USB C Cable 3A 10Gbps EMI Shielding, 30cm

  • The PCB is made of high-quality materials with high frequency and low resistance. The PCB is made of precision. The PCB uses high TG plates. The thickness of the copper material is thickened to 1oz. The PCB power circuit is strengthened and the use of 2 5V power core wires is strengthened, so that the transmission current is more powerful. Support up to 3A..
  • The differential signal has no via hole design, the signal is pure, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF short circuit phenomenon, and the product is durable..
  • Product application: GPS navigator, storage device, imaging device, for Pi 4 for MCU development board, built-in USB device to extend the use of , convenient for USB power supply and USB signal transmission of SLR handheld pan/tilt, etc..
  • Cable length Description: The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector..
Check Stock

Cermant 3-Pin 5.08mm Pitch Male Female Plug-in PCB Screw Terminal Block Connector (5.08mm-3P-20Set)

  • Pin Number : 3 Pin Distance : 5.08mm/0.2"..
  • These PCB screws are snap together well.have a quick release capability.Just need to loosen the screws to land the wires.Use high-quality plastic PA66 high temperature resistant V0 flame retardant,steel screw environmentally friendly electroplating,no slippage.Widely used in electronics,communication equipment,instruments.
  • Package Content: 20 Set x PCB Terminal Block Connector.
Check Stock

CableCreation Internal HD Mini SAS (SFF-8643 Host) - 4X SATA (Target) Cable,SFF-8643 to 4X SATA Cable, SFF-8643 for Controller, 4 Sata Connect to Hard Drive, 1M / 3.3FT

  • [ SFF-8643 Cord ] The SFF-8643 is the latest HD Mini SAS connector design for implementing HD SAS Internal interconnect solutions..
  • [ High Data transfer] 36 pin High Density (HD) Mini SAS SFF-8643 Internal cable assemblies are available for SAS 2.1, 6Gb/s and SAS 3.0, 12Gb/s specification. Hybrid versions of these new cables will allow for a smooth transition from 6Gbps to 12Gbps.
  • SFF-8643 is the new connector uses less PCB real estate and allows higher port density for internal hosts and devices.
  • [ SFF-8643 Port ] SFF-8643 interface is the new connector uses less PCB real estate and allows higher port density for internal hosts and devices. It support up to 4-ports (4 lanes) of SAS data and is compliant with the latest SAS 3.0 spec.
  • [ What You Get] 1 x CableCreation 3 FT Mini SAS SFF-8643 Cable. CableCreation provide 24 Months Warranty and lifetime Technical Service.
Check Stock

Ethernet Splitter Cable RJ45 Network Adapter, Onepeace 1 Male to 2 Female LAN Internet Cable Adapter, Suitable Super Cat5, Cat5e, Cat6, Cat7

  • Ethernet Splitter RJ45 1 to 2 allow 2 computers to share high speed DSL, cable modem or other Ethernet ports. NOTE: Don’t support 2 computers that connect to the internet simultaneously, ONLY 1 output port is working..
  • 【Enjoy High-speed Internet Access】Pure Copper Gold-Plated Needle with Eight Cores, Watching movies, chasing dramas, surfing the Internet, playing games, etc., lossless transmission rate is fast, so that buffering is faster without waiting..
  • 【Extensive Compatibility】Suitable for equipment with RJ45 interface, computer, router, network box, optical modem, can be used as an extension, compatible with Cat5/5e/6 7..
  • 【Thicker PCB】The Ethernet splitter connector adopts thicker PCB board, gold-plated needle core, and integrated mechanical welding to avoid damage caused by wire leakage..
  • 【Plug and Play】Connector A: 1 to 2 RJ45 Ethernet splitter, Connector B: RJ45 . This RJ45 1 to 2 RJ45 Ethernet splitter can help you avoid pulling cables back and forth, Installation simple and easy to use..
Check Stock

Jienk 5Pcs 4-Pin 300V 8A KF2EDGK 3.5mm Pitch Screw Terminal Block Connector for 28-16AWG

  • 【Terminal Pitch】3.5mm/ 0.14inch pitch PCB terminal block connector..
  • 【Easy to Use】No soldering required. Just use a small screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire, and re-tighten. Save you from solder trouble, no need to purchase expensive tool. Great time and money saver..
  • 【Application】: PCB terminal is widely used in electronic equipment, such as small electronic watches, calculates, general computer, communication electronics equipment automatic control system, domestic appliance and warning devices, etc..
  • 【Package Includes】: 5 x PCB Terminal Blocks..
Check Stock

uxcell IDC 20 Pins Connector Flat Ribbon Cable Female Connector Length 30cm 2mm Pitch,5pcs

  • 20 Pins Connector Flat Ribbon Cable,2mm Pitch.
  • Suitable for internal wiring in office equipment and video machines.
Check Stock

uxcell IDC 14 Pins Connector Flat Ribbon Cable Female Connector Length 30cm 2mm Pitch,5pcs

  • 14 Pins Connector Flat Ribbon Cable,2mm Pitch.
  • Suitable for internal wiring in office equipment and video machines.
Check Stock