Reviews Pcb Assembly Line

Dji F550 Flame Wheel Arf Kit

  • Ultrastrength Material Frame Arms adopt PA66+30GF ultrastrength material design, providing better crashworthiness.
  • Attractive Frame Arms Provide different color frame arms: red, white, black, which makes your flight more colorful..
  • Integrated PCB Wiring The use of high strength compound PCB frame board, makes wiring of ESCs and battery safer and easier.
  • Huge Assembly Space Optimized frame design, which provides abundant assembly space for autopilot systems..
Check Stock

Fstop Labs Replacement for DJI Mavic Pro Platinum Gimbal Flexible Flat PCB Gimbal Ribbon Cable

  • DJI Mavic Pro Platinum Flexible Flat PCB Gimbal Ribbon Cable Line.
  • Used to fix DJI Mavic Pro Platinum 4k Gimbal Camera assembly with broken cables that run through the arms.
  • Compatible with both Mavic Pro and Platinum(Doesn't fit Mavic Air, Mavic 2 Pro/Zoom).
  • High grade and meant to last longer than what came with the original.
Check Stock

Arcade Fight Stick Street Fighter Arcade Joystick Keyboard control Fighting box PXN X8 For Nintendo Switch/PS4/PS3/XBOX Series X/S/XBOX S/X,PC

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

USB Female Type-B Port 4-Pin Right Angle PCB DIP Jack Socket-White 10 Pack by MUZHI

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

uxcell 17pcs DIP IC Chip Socket Adaptor Round 28 Pin 2.54mm Pitch Dual Row 15.24mm Row Pitch

  • Row to Row Distance(Approx):15.24mm/ 0.6".
  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

Hyekit Custom Gaming Keyboard - Alice Layout 66 Keys - Support QMK/Via - Gasket Structure - USB C Wired Mechanical Keyboard Kit - RGB Hot Swappable Switches & Keycaps - Acrylic Shell - Transparent

  • 【Package Included】Keyboard case*1, PCB*1, Quiet sandwich cotton*1, Switch pad*1, Assemble some parts. No USB cables, switches, stabilizer, and keycaps. (Note, The kit needs to be assembled by yourself. you ensure that you have a certain ability to assemble. You can refer to our assembly instruction video for assembly. Let’s enjoy the process of assembling the keyboard and the great sense of achievement brought by the successful assembly.).
  • 【Custom Gaming Keyboard】Hot-swappable PCB uses Kailh hot-swappable socket and supports 3-pin and 5-pin mechanical switches. Support PCB Mounted and Plate Mounted stabilizers, we recommend you to use PCB Mounted stabilizers. 32U4 chip master, support QMK/VIA, more customized, you can use it to modify key functions and customize more functions. Wired mode, supports USB-C, typing response is faster..
  • 【Alice Layout】The Alice layout considers the natural input angle of the wrist from the perspective of ergonomics. When using the conventional arrangement keyboard for continuous high-intensity input work, the unnatural bending of the wrist will easily lead to hand fatigue, and the Alice layout can solve this problem very well, it takes into account the integrity of the keyboard and the relatively relaxed input....
Check Stock

uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

Velleman K2639 Liquid Level Controller

  • power supply: 12-14V AC or 16-18V DC / 100mA.
  • dimensions: controller PCB: 4.1 x 2.4" sensor PCB: 4.1 x 1.
  • you can substitute your own sensor probes.
  • THIS IS AN ELECTRONIC KIT AND REQUIRES ASSEMBLY..
Check Stock

Pieces 4 Pin LED Light Strip Connectors Set Including Screw Fixing Clips, 4 Pin LED Connectors, Cuttable T, L and X Shape PCB Board for SMD 5050 RGB LED Strip Lights Gapless Solderless Connector

  • Please cut the LED strip according to the cuttable mark when you want to change the shape of PCB board.
  • Simple to install: the LED strip connector clip can be easily opened and closed, you can quickly slide RGB strip into the connector clip without any tool, please make sure connector + - polarity in line with + of strip before you connect it.
  • Wide range of usages: the 5050 LED strip connectors are suitable for standard density strips or DIY LED lights, for corner connection, and able to decorate Christmas trees, parties, birthdays, weddings, parties and other scenes according to your own needs.
  • Sufficient quantity: the package comes with 40 pieces 4 pin LED connectors, 15 pieces L-shaped PCB boards, 15 pieces T-shaped PCB boards, 5 pieces X-shaped PCB boards and 20 sets of screw fixing clips, which can meet your different needs in daily life.
Check Stock

Avanexpress DB9 Breakout Connector RS232 Serial 9 Pin Connector Db9 Terminal Male x 1 Female x 1

  • All-copper base, contacted better and more antioxidative.
  • All signal ports named and labeled clearly.
  • High quality PCB carrier, FR-4 fiber glass PCB..
  • Compliant assembly, 100% new, quality multiple checked before fulfilled..
Check Stock

Strobe Receiver

  • Directly printing inductor traces on the PCB board greatly simplifies the difficulty of assembly..
  • The kit uses a band-pass filter, 3355 high-amplifier, NE602 mixing, MC1350 mid-amplifier solution, which can receive AM signals of 118-136MHz..
  • 12V power supply, 9.2 x 7.5cm PCB board size, which can be directly used in 97 x 40 x 75mm aluminum chassis.
  • The AGC circuit on the board ensures comfortable listening, while the squelch function avoids long-term noise..
  • It is specially used to receive the call between the aircraft and the tower. With the antenna with good performance (VHF band Yagi antenna), the open area can receive various types of aircraft and tower calls within about 190Km. Please pay attention to your favorite friends..
Check Stock

Twinkle Bay D-SUB DB15 Male 15Pin Jack Port to Terminal Breakout Board Connector 3Row Plug, DR15 VGA Male with Case

  • All-copper base, contacted better and more antioxidative..
  • All signal ports named and labeled clearly..
  • High quality PCB carrier, FR-4 fiber glass PCB..
  • Compliant assembly, quality guaranteed by Twinkle Bay..
Check Stock

Delfield 3516459 3.00 X 7.00 Receiver

  • Directly printing inductor traces on the PCB board greatly simplifies the difficulty of assembly..
  • 12V power supply, 9.2 x 7.5cm PCB board size, which can be directly used in 97 x 40 x 75mm aluminum chassis.
  • It is specially used to receive the call between the aircraft and the tower. With the antenna with good performance (VHF band Yagi antenna), the open area can receive various types of aircraft and tower calls within about 190Km. Please pay attention to your favorite friends..
  • The AGC circuit on the board ensures comfortable listening, while the squelch function avoids long-term noise..
  • The kit uses a band-pass filter, 3355 high-amplifier, NE602 mixing, MC1350 mid-amplifier solution, which can receive AM signals of 118-136MHz..
Check Stock