Circuit Board Holder with Adjustable Heavy Duty Base Large Soldering Helping Hand Vise 360° Rotated For Clamping PCB solder DIY Printed Circuit Board Stand NEWACALOX
- Non-slip PCB clips: The PCB clips on the holder is easy flips printed circuit boards 360°, use better elasticity springs to avoid slipping, easily....
- Sturdy construction and easily adjusted. The Soldering helping hand holder is made of aluminum alloy and has 3 screws to tighten and fix, heavy and....
- Equipped with 4 rubber feet under the base ensure stability, so the holder will not slide around on the bench. keeping safe. the base is solid and....
- Adjustable PCB holder frame: The rolling bearing makes the bracket move more smoothly without jamming, the ability to rotate is great for switching....
- Easy to Install and easy to use: It is very convenient to insert the pcb board and easy to remove. You could make any position adjustment you want by....
Check StockREGA Planar 1 Plus Turntable with Premounted Carbon MM Cartridge (Matte Black)
- Built-in phono stage is a high specification pre-amp designed to allow simple connection to a wide variety of products.
- 23 mm high mass phenolic platter with improved flywheel effect for improved speed stability.
- Precision brass main bearing offers improved fit and removes stress on the bearing itself.
- Synchronous AC motor with a new motor PCB and aluminium pulley offering low noise and better speed stability.
- RB110 tonearm built with Rega designed bespoke ultra low friction bearings.
Check StockASUS Dual AMD Radeon RX 6600 XT OC Edition 8GB GDDR6 Gaming Graphics Card (AMD RDNA 2, PCIe 4.0, 8GB GDDR6 Memory, HDMI 2.1, DisplayPort 1.4a, Axial-tech Fan Design, 0dB Technology)
- Axial-tech Fan Design features a smaller fan hub that facilitates longer blades and a barrier ring that increases downward air pressure..
- Dual ball fan bearings can last up to twice as long as sleeve bearing designs..
- Auto-Extreme Technology uses automation to enhance reliability..
- Protective backplate prevents PCB flex and trace damage..
Check Stock
Solar Panel Fan Kit AntPay 10W Weatherproof Dual Fan with 11Ft/3.5m Cable for Outside Small Chicken Coops Greenhouses Sheds,Pet Houses Window Exhaust
- ✔ COOL AND CLEAN: This is an excellent solution for Small Chicken Coops, Greenhouses, Sheds,Pet houses, Window Exhaust in the hot summer .The10W Solar Panel Dual Fan Kit can push the heat air out and push the cool air in,which effectively reduces the indoor temperature and keeps the air fresh..
- ✔ LARGE AIRFLOW: It is designed with high quality weatherproof motor, service life more than 6 years, with Max rotational speed 3000 r/min, 200 CFM large airflow.Recommended Max greenhouse &chicken coops space:200cubic feet(L X W X H) ,E.g 8*5*5.
- ✔ WEATHERPROOF DESIGN: The motor part of fan (PCB board/wiring/bearing) has been coated to prevent rain from causing short circuit or damage .The waterproof level can reach IPX7, which is suitable for outdoor environment use..
- ✔ SAFETY PROTECTION: The dual fan is equipped with a double metal protection net to prevent small animals from being injured and to protect the normal operation of the fan blades..
- ✔ NOTE: The speed of the fan is greatly affected by sunlight. When the sun shines directly on the solar panel, the fan can reach 3000 RPM . When the sunlight is weak, the fan will work slowly or even stop working.There is no built-in battery in the solar fan,Only work during the daytime..
Check StockCircuit Specialists | Deluxe PCB Preheater and Desoldering System with Hot Air Gun & Soldering Iron - Home & DIY Electronics - Solder Station Tool Kit
- Introducing the CSI853B+ PCB preheater and hot air rework station, your ultimate solution to soldering and de-soldering surface mount integrated circuits..
- Featuring a 1000 watt heater, the CSI853B+ integrates a PCB preheating platform with a hot air re-work and soldering system..
- This easy-to-operate system is powered by 110 VAC +/- 10% and has a maximum power of 1000 watts (preheater and hot air combined)..
- With a temperature range of 50-400 deg C (122 to 752 deg F) for the preheater and 100-480 deg C for the hot air, the CSI853B+ is designed for stable and consistent working output..
- The hot air wand, with 720 watts of power and a maximum flow of 120L/minute, can be hand-held or mounted into the moveable stand for freehand work..
Check Stock
5.2W Car Cooling Fan,USB Solar Powered Portable Fan,for Cooling, Ventilation,Caravan,Camping,Home,Office,Outdoor Traveling
- ...mperature and keep the air freshing. And, the solar panel powered fan can attain 3000 rpm when the sun is directly shining on the solar panel. When the sun is weak, the fan will work slowly or even stop working..
- 【PANEL WATERPROOF】The fan motor part (pcb board/ wiring/ bearing) has been coated to prevent short circuit or damage from rain. Meanwhile, the portable exhaust fan can adapt to the harsh outdoor environment, improve durability, not afraid of wind and rain, and can be placed outdoors for a long time..
- 【SAFETY PROTECTION AND ECONOMICAL & PRACTICAL】The solar outdoor exhaust fan is equipped with a metal protection mesh, which can prevent small animals from being injured and protect the normal operation of the fan blades. And, the portable ventilator exhaust fan is powered by sunlight, which is green and can help you save a lot of money on electricity while meeting your needs..
- 【PROVIDING OUTDOOR GREEN POWER SOLUTIONS】The solar panel kit with fan specializes in providing outdoor green power solutions for explorers. Portable power station, power outdoors. Ideally suited for the outdoor life and even unexp....
Check StockPFC-100 Platinum Series Camo Kryptek Highlander A
- High performance Fluid Dynamic Bearing (FDB) fans are designed to take advantage of the impact absorbance effects of oil.
- The Seasonic PRIME Series is designed with very favorable level of acoustics and it uses carefully selected components and innovative circuit design....
- Seasonic's latest design keeps the output voltage within a very tight range, achieving under 0.5 % (1 % for 1000 W and above) load regulation.
- Seasonic's engineers have implemented a new design feature, where instead of cables.
- the back panel and the PCB (Printed Circuit Board) are connected....
Check StockFenlink 2.5" to 3.5" Internal SSD Hard Drive SATA Drive Converter
- Fenlink 2.5″ to 3.5″ SATA Drive Converter: Turns your 2.5 inch SATA HDD / SSD into 3.5 inch so you can install it into your desktop PC and Apple Mac Pro models.
- Superb Quality:Immersion Gold PCB manufacturing process using reasonable PCB layout design, stable transmission rate.
- Excellent Performance: SATA III standard supports a theoretical maximum speed of 6Gbps, also backward compatible with SATA I/II.
- Good Heat Dissipation: Open design allows for full air flow for proper drive cooling, Aluminum Alloy frame design and protects your hard drive.
Check StockYootop Blue PCB Solder Wrapping Wire PVC Coated Tin-Plated Copper 30AWG Wire Cable Roll 1000Ft P/N-30-1000
- Features flexible and insulation wrap wire, tin-plated copper breadboard jumper cable for test jig, jtag or any electronic test uses..
- Plastic spool will be provided together for better organizing..
- It is mainly used for PCB testing wire or electronic components inside the connection wire..
- Suitable for laptop, motherboard, LCD display, breadboard, electronic test and other PCB soldering fly line..
- Widely used in household appliances, heating equipment, catering equipment, air conditioning, lighting, electronic equipment, electric products and automobile industry etc..
Check Stock
SCULPFUN S10 Laser Module with Air Assist Nozzle, 10W Optical Power, 20mm Wood 15mm Acrylic Cutting, Faster & Stronger Laser Cutter, Ultra-Fine Compressed Spot, Compatible with Laser Engraving Machine
- Cut 10mm walnut and 6mm MDF and other high density materials.
- Carving metal, glass, stone, etc. Which means S10 has higher energy density, stronger cutting penetration and engraving capabilities..
- Engraving/Cutting Materials: Engraving materials: all kinds of wood, bamboo, MDF, cardboard, plastic, leather, PCB, aluminum oxide, 304 stainless steel, ceramics, dark stone, etc. Cutting materials: all kinds of wood, MDF, acrylic, cardboard, non-woven, bamboo, leather, some plastic boards, PCB, etc..
- Highly Compatible Design: SCULPFUN S10 laser module comes with a clever and highly compatible structural connection device, which can be well adapted to different laser engraving cutting machines, 3D printers, CNC milling machines, such as SCULPFUN S9/S6pro/S6. Also compatible with other brands laser engraver..
Check StockYellow Sanwa LB35 Balltop for JLF Joysticks
- Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
- Replacement microswitch PCB for Sanwa JLF series Joysticks.
- Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
- Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
- Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check StockGenmitsu GS-775M Micro DC 24V 20000RPM 775 Motor, Double Ball Bearing, High Power, Noise Suppression, DC Motor Driver for Electrical Tools DIY
- Double ball bearing brush. CW/CCW rotation..
- Pure copper wire, low heat, long life, low loss..
- Pre-installed motor noise suppression PCB provides enhanced performance..
- It's widely applied to electric tools, electric fans, electric cleaners, lathes, mills, car hoists, pumps & conveyors, etc..
Check Stock
ACASIS USB C 3.2 SSD Enclosure for Apple Flash SSDs 12+16 PIN MacBook Pro,MacBook Air, Mac Pro, iMac from 2013 to 2017 Portable Storage Enclosure Compatible with M.2 Nvme SSD with Adapter
- [More Compatibility] This USB C 3.2 SSD enclosure support for apple Mac SSD with 12+16PIN which was original factory-installed. NOT SUPPORT Toshiba 12+16PIN SSD and all SATA SSD. NOT compatible with Third-party SSDs, including OWC SSDs. Support M.2 Nvme SSD after installing the enclosed interface adapter..
- [Faster Data Transmission] 10Gbps transmission speed with USB 3.2 Gen2 interface. Save and transfer data in a seconds. It can also reach 20Gbps transmission speed with USB 3.2 Gen2x2 if the computer supports..
- [Friendly Design] Aluminum alloy case for quicker heat dissipation. ACASIS USB C 3.2 SSD enclosure is sturdy and portable..
- [System Requirements] ACASIS USB C 3.2 SSD enclosure supports Windows7/8/10/11,Mac OS 10.0,Linux 2.6 or later.Supports for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro.
- [Easy Installation] Just take out the PCB board from the enclosure,then fully insert SSD to card slot of the PCB board, put PCB back into the enclosure,tighten the screws.Plug and play, support hot plug.On Windows OS, hard disk will not available on "This PC"/ "My computer.
Check Stock
