Reviews Pc Case Glass Panel

GIM Micro ATX Case, Mini-ITX Gaming PC Case 2 Tempered Glass Panels & Front Panel Micro ATX PC Case Mini Tower Computer Case USB 3.0 I/O Port, Rhythm Surround Light, Water-Cooling Ready

  • ... atx pc case is equipped with 1 pcs 0.1cm pull-out dust net, it can be directly washed, keep your pc case clean and tidy at all times..
  • 【Mortise and Tenon Quick Release Structure】 This Micro atx pc case designed with Quick Release Structure. The top panel need to be opened firstly, then to remove the front panel glass and left side glass. The top panel comes with anti-loss screws for Quick Removal and installation save your time..
  • 【TOP I/O Panel】 GIM mini atx case designed with 1 x USB 3.0 Port, 1 x USB 2.0 Port, 1 x Headphone Jack, 1xMicrophone Jack, 1x Reset/LED Button, 1x Power Button. Our USB cable is shielded wire so that you can transmit data without interference..
  • 【Cooling Exhaust & Heat Dissipation】 Four sides of the white micro atx case are ventilation surface, effectively reduce the internal temperature of the chassis, enhance the service life of the pc case and your using experience..
  • 【Full-view Tempered Glass Panels】 GIM Mini PC Chassis has 2pcs 3mm-thick tempered glass full-view side panels. The internal space is wide and easy to install 2 x 2.5″ SSD ；1 x 3.5″ HDD；Micro ATX/ITX motherboard support.
  • 4*120mm ARGB Fan/240 Liquid Cooler,maximum length 320mm GPU..
Check Stock

Raidmax ATX Desktop Computer Gaming PC Case Mid Tower PC Case with addressable RGB Lighting ARGB Fans ATX PC Case USB 3.0 Tempered Glass PC Case Window Computer Case with ARGB LED Black PC Case - p805

  • Triangle Light Bar Front Panel with Tempered Glass - Our ATX P805 mid tower gaming computer case comes with a stylish stand out front panel with ARGB triangle light effect which gives out a unique lighting effect..
  • 120mm ARGB Rear Fan - There is a whopping addressable RGB fan in the P-815 gaming computer mid tower case for PC. It is capable of operating quietly while moving high volumes of air with ARGB lighting effects..
  • ARGB Lighting System - The ARGB ATX PC Case with front triangle bar can be managed by the button on I/O panel to create a comprehensive ARGB lighting system..
  • Tempered Glass PC Case Side Panel - Flex your gaming hardware, custom-loop cooling, anything you put inside your mesh PC case is shown in a panoramic view through an edge-to-edge tempered glass side panel..
  • Optimized Airflow with Magnetic Dust Filter - Filtered ventilation on the top panel provides additional thermal support while also offering mounting options for future cooling upgrades with magnetic dust filter included..
Check Stock

Micro-ATX Case, MOROVOL 2pcs 120MM ARGB Fans Computer Case USB 3.0×2 Micro ATX Tower Computer Case Opening Tempered Glass Panel & Mesh Front Panel Airflow MATX Gaming PC Case (TW7, Pink)

  • 【Door Opening Design】The MOROVOL mATX case with tempered glass side panel possessing magnetic buckle and metal pull ring is easy to install the hardware, and can be opened at any time, improving the ultimate thermal effect, which improves 84% of the cooling effect than the non-opening panel case..
  • 【Extraordinarily Cooling System】Both of the front panel and the top is mesh for optimal cooling performance, and the case is pre-installed 2pcs ARGB fans that provides strong airflow to the pc case for optimal cooling performance..
  • 【Excellent Lighting Effects 】This PC case Included a ARGB controller and 2pcs ARGB fans. With the ARGB controller, through connecting 5V 3PIN interface of motherboard to achieve fans sync color. Each addressable ARGB fan offers 16.8 million colors to create a stunning lighting effect. The high light-transmitting glass side panels showcase your computer's ARGB colors. (Note: 12V 4PIN motherboard is not suitable for motherboard control mode, and it is recommended to use button control only.).
  • 【Top I/O Panel】The micro pc case TW7 is designed with 2 x USB3.0 ports for faster transfer speed. With HD audio and microphone ports to enjoy lossless sound quality. Dedicated LED buttons can be used to control 19 lighting modes f....
Check Stock

MOROVOL Mesh Micro-ATX Tower Computer Case, 2PCS × ARGB Fans Pre-Installed and 2×USB 3.0 Ports, Magnetic Design Opening Tempered Glass Panel & Mesh Front Panel Mini-ITX Gaming PC Case, White

  • 【Door Opening Design】The MOROVOL mATX case with tempered glass side panel possessing magnetic buckle and metal pull ring is easy to install the hardware, and can be opened at any time, improving the ultimate thermal effect, which improves 84% of the cooling effect than the non-opening panel case..
  • 【Extraordinarily Cooling System】Both of the front panel and the top is mesh for optimal cooling performance, and the case is pre-installed 2pcs ARGB fans that provides strong airflow to the pc case for optimal cooling performance..
  • 【Excellent Lighting Effects 】This PC case Included a ARGB controller and 2pcs ARGB fans. With the ARGB controller, through connecting 5V 3PIN interface of motherboard to achieve fans sync color. Each addressable ARGB fan offers 16.8 million colors to create a stunning lighting effect. The high light-transmitting glass side panels showcase your computer's ARGB colors. (Note: 12V 4PIN motherboard is not suitable for motherboard control mode, and it is recommended to use button control only.).
  • 【Top I/O Panel】The micro pc case TW7 is designed with 2 x USB3.0 ports for faster transfer speed. With HD audio and microphone ports to enjoy lossless sound quality. Dedicated LED buttons can be used to control 19 lighting modes f....
Check Stock

MOROVOL Mesh Matx (Micro-ATX) Case Tower Computer Case, 2PCS × ARGB Fans Preinstalled and 2×USB 3.0 Ports, Magnetic Design Opening Tempered Glass Panel & Mesh Front Panel Gaming PC Case(TW7-S2-BL)

  • 【Door Opening Design】The MOROVOL mATX case with tempered glass side panel possessing magnetic buckle is easy to install the hardware, and can be opened at any time, improving the ultimate thermal effect, which improves 84% of the cooling effect than the non-opening panel case..
  • 【Extraordinarily Cooling System】Both of the front panel and the top is mesh for optimal cooling performance, and the case is pre-installed 2pcs ARGB fans that provides strong airflow to the pc case for optimal cooling performance..
  • 【Excellent Lighting Effects 】This PC case Included a ARGB controller and 2pcs ARGB fans. With the ARGB controller, through connecting 5V 3PIN interface of motherboard to achieve fans sync color. Each addressable ARGB fan offers 16.8 million colors to create a stunning lighting effect. The high light-transmitting glass side panels showcase your computer's ARGB colors. (Note: 12V 4PIN motherboard is not suitable for motherboard control mode, and it is recommended to use button control only.).
  • 【Top I/O Panel】The micro pc case TW7 is designed with 2 x USB3.0 ports for faster transfer speed. With HD audio and microphone ports to enjoy lossless sound quality. Dedicated LED buttons can be used to control 19 lighting modes for ARGB fans..
Check Stock

iPhone XR Case TPU Anime Case 4 Corners Shockproof Protection Scratch PC Back Cases, for 6.1 inch Phone (Uchiha-Clan-and-Akatsuki-Cloud)

  • front with audio and both USB 3.0 and USB 2.0 ports, tempered glass side panel with single screw installation, and upgraded smart device..
  • an edge-to-edge tempered glass side panel window shows off your PC's components..
  • a full-length PSU cover hides your PSU and cables out of sight, making immaculate builds easier to create than ever..
  • perforated honeycomb front panel to aid airflow and features a tempered-glass side panel to showcase your build's internals in the compact case. fits up to 8x120mm cooling fans for terrific airflow that keeps your pc cool..
  • this neatly internal design of the chassis provides convenient and decent cable management and airflow. dust filters on top and bottom can effectively prevent dust from entering the computer case..
Check Stock

MUSETEX ATX PC Case with 6 Pcs 120mm ARGB Fans, Computer Gaming Case Mid-Tower Phantom Black, Tempered Glass Computer Chassis, USB 3.0, MN6-B

  • Well-engineered Airflow - MUSETEX PC case MN6-B are pre-installed 6 pcs 120mm ARGB fans to provide lighting, utilizing anti-vortex vanes to ensure proper airflow inside the case to achieve better cooling performance than ordinary PC case..
  • Show Off Your Lights - MN6 with stylish tempered glass design showcases your PC components and ARGB lighting. The side and front high transparent glass will help you build the coolest computer chassis..
  • Support 240mm Water Radiator - The top of MN6-B supports 240mm water radiator to satisfy more pc gamers (This may affect the installation of memory with heatspreader). After installing the radiator, the 2 pre-installed ARGB fans on the top can be installed on the top of the power compartment. Meanwhile, the control board reserves 2 additional 5V 3PIN interfaces that can be connected to your radiator. Even more amazing is that the lights of different components such as fans and radiator are sync..
  • Powerful I/O panel - The gaming PC case has 1 USB 3.0 high-speed port, 2 USB 2.0 ports, HD audio and microphone ports. Dedicated LED buttons can be used to control 19 lighting modes for ARGB fans..
  • The Coolest PC Case -- MUSETEX MN6 has 2 tempered glass fronts and sides, 6 ARGB fans with 19 light mo....
Check Stock

MUSETEX ATX PC Case with 6pcs ARGB Fans, Computer Gaming Cases with Type-C Port and USB 3.0, Mid Tower Case with Mesh Front Panel and Tempered Glass Side Door, Y4

  • Ultimate Thermal Performance - The computer case with tempered glass side panel possessing magnetic buckle and metal pull ring is easy to install the hardware, and can be opened at any time, improving the ultimate thermal effect, which improves 76% of the cooling effect than the non-opening panel case..
  • MUSETEX PC Case Y4 New Features - The top I/O panel provides Type-C and 2 USB 3.0, holding the faster transfer speed and requiring no additional upgrades in the future..
  • 6 Pre-Installed 120mm ARGB Fans - Suitable for enhanced cooling. With the pre-installed ARGB controller you can sync it with the motherboard, each addressable ARGB fan offers 16.8 million colors for exceptional customizable lighting. You don't need to pay extra for fans..
  • Avant-Garde Design - Grey triangular cutout front mesh panel for excellent cooling performance, and the high light-transmitting glass side panels showcase your computer's ARGB colors..
  • More Storage Space - The mid tower pc case provides multiple hard drive fixed slots, supporting to install 2*SSD + 2*HDD or 3*SSD + 1*HDD..
  • Compatible with Different Radiator - The top of the pc case is designed to fit 120 / 240mm radiators. After installing the Radiator, the original 2 fans at the top can be installed at the above the powe....
Check Stock

Miracase Glass Case for iPhone 12/ iPhone 12 Pro 6.1 inch (2020), Full-Body Clear Bumper Case with Built-in 9H Tempered Glass Screen Protector for iPhone 12/ iPhone 12 Pro, Black

  • 【Military Grade Protection】 Military GSG Drop Tested. Dual layer (Glass/PC) provides 360 degree full body rugged protection. Four Cushioned corners create enhanced security during drops and falls..
  • 【Glass+ Built in Screen Protector】Front sensitive glass screen protector snugly conforms to the iPhone screen, which enhance more effective sensitivity when touching screen. Compared with other competitors' PET rough front layer, Miracase Warrior 2020 upgraded front 9H Glass + prevent your iphone screen from scrach, crack, and blemish-free. Back Glass Panel..
  • 【Cristal Transparent back plate】The clear back panel adopts 99.9% High light transmittance PC panel, which helps to show the real color of your iphone back face. The PC backboard is made of 2020 upgraded polymer, which could effectively prevent scratches and cracks when drops or falls..
  • 【Wireless Chargers & Easy Install】Support wireless charging without taking off the iPhone 12/ iPhone 12 Pro. The 2 pieces design offers easy install only for iPhone, you only need to do 2 steps, cover the front case onto the face of iphone, then press the whole phone into the back plate of Miracase shockproof case..
  • Only Compatible with iphone 12 and iphone 12 pro.
Check Stock

MOROVOL ATX PC Case with 4PCS RGB Fans Airflow Mid-Tower Gaming case with Diamond-Shaped Mesh Front & Tempered Glass Side Panel Computer Case 621-N4

  • 4PCS RGB Fans for Gifts - The 621 pc case is pre-installed with 4 RGB 120mm case fans, which are fixed RGB lighting capable and can provide....
  • Perfect Airflow - The diamond mesh front panel of this ATX case is the optimal cooling performance panel that features a stereo contour. While this....
  • Precise Design - Morovol 621-N4 computer case supports ATX / Micro-ATX / Mini-ITX, the GPU is up to 300mm, the PSU is up to 160mm and the CPU cooling....
  • Tempered Glass Side Panel - The Mid-tower case is designed with removable tempered glass side panel. The precise design makes this tower case both....
  • Excellent I/O Panel - The 621 gaming case provides fast and easy access to the I/O panel, with 1 USB 3.0 port (faster data transfer), 2 USB 2.0 ports,....
Check Stock

MUSETEX ATX PC Case Mid-Tower with 6pcs 120mm ARGB Fans, Computer Gaming Case with Tempered Glass Side & Front Panels, Metal Honeycomb Mesh, USB3.0, S6-B

  • Well-engineered Airflow - MUSETEX Gaming PC Case S6-B are pre-installed 6 pcs 120mm ARGB fans to provide lighting, utilizing anti-vortex vanes to ensure proper airflow inside the case to achieve better cooling performance than ordinary PC case..
  • Show Off Your Lights - S6-B with stylish tempered glass design showcases your PC components and ARGB lighting. The side and front high transparent glass will help you build the coolest computer chassis..
  • Powerful I/O panel - This atx computer case has 1 USB 3.0 high-speed port, 2 USB 2.0 ports, HD audio and microphone ports. Dedicated LED buttons can be used to control 19 lighting modes for ARGB fans..
  • Support 240mm Water Radiator - The top of S6-B supports 240mm water radiator to satisfy more pc gamers (This may affect the installation of memory with heatspreader). After installing the radiator, the 2 pre-installed ARGB fans on the top can be installed on the top of the power compartment. Meanwhile, the control board reserves 2 additional 5V 3PIN interfaces that can be connected to your radiator. Even more amazing is that the lights of different components such as fans and radiator are sync..
  • The Coolest PC Case -- MUSETEX S6-B has 2 tempered glass fronts and sides, 6 ARGB fans with 19 ligh....
Check Stock

Segotep T3 White Mid-Tower ATX Gaming PC Case w/ ARGB & PWM Fan, Support Top & Side 360mm Radiators, Snap-On Opening & Closing Front Panel, Type-C I/O Port, Tool-Free Disassemble

  • 【SNAP-ON OPENING AND CLOSING FRONT PANEL】 White pc gaming case shows off your high profile components and RGB lighting by tempered glass side panels and snap-on opening and closing front panel. 10° smart panel air duct design can provides ample airflow. 1 pre-installed ARGB fan can offers 16.8 million colors for excellent customizable lighting..
  • 【FOCUSED ON CPU COOLING 】 ATX pc case is suitable for high-powered PC builds and the fan can be mounted behind the motherboard for the precise cooling of the CPU core..
  • 【SUPPORT DUAL 360MM WATER COOLING 】 Our white ATX computer case allows for the simultaneous installation of dual 360mm radiators, top 360mm water cooling and side 360mm AIO liquid cooled gpu. PC gaming case can supports up to 13 fans for best temperature performance..
  • 【TOOL-FREE DISASSEMBLY】 The modular design of our mid-tower pc case allows for tool-free disassembly. Allows you to achieve different thermal layouts by tool-free removal of the front panel, snap-on side panels, baffles and compartment covers..
  • 【PRE-INSTALLED GPU Bracket】 Our computer gaming case pre-installed graphics card bracket, can be adjusted according to the location of the graphics card fixed. Graphics card holder silicone pad temperature resistance value....
Check Stock

LIAN LI LANCOOL 2 WHITE Tempered Glass ATX Case -White Color -LANCOOL II -W

  • Computer case with clean aesthetic. Dimensions: 8.1 x 16.3 x 19.1inch. 0.8mm SPCC front panel and SPCC 0.6mm main structure with plenty of room for all components, make it durable and roomy for your first build, 1st PC, theater and gaming PC.
  • Gaming PC Case with tempered glass side panel allows for a great view of your RGB components. Changing motherboard size supporting ATX, mATX and Mini-ITX.
  • Mid-Tower Chassis with ease installation design. Removable SSD mounting brackets, swappable top and front fan brackets and bottom side panel PSU and HDD bay. Change with no more pain.
  • Desktop computer shell case with professional cable management solution. Extra space behind the motherboard tray for hidden cable organization. I/O essentials, 2xUSB 3.0, Power button, audio out and in on the top.
  • High air performance with Magnetic Dust Filter, Side Ventilation and 2 Pre-installed 120mm fans. Magnetic dust filters on top and front, dust filter tray at bottom. Liquid cooling ready.
Check Stock