Reviews Paul Pressure Valve

MTM Hydro Ball Valve for Pressure Washer Gun, High Pressure Power Washer Shut Off Valve Stainless Steel 3/8” Female NPT 5000 PSI

  • PRESSURE WASHING BALL VALVE - Premium 3/8” Stainless Steel Ball Valve for pressure washer guns. 5000 PSI Max Pressure rating. Max Temp 250 degrees Fahrenheit..
  • STAINLESS STEEL - Ball valve pressure washer made from stainless steel, offering enhanced rust and corrosion resistance. Durable pressure washer accessories built for long-term use..
  • EASY SWITCHING - Power washing valve commonly found at the base of the high pressure washer gun. Enables quick shut off to switch between pressure washing guns without turning off the entire system..
  • HIGH QUALITY SEALS - High pressure ball valve with high quality PTFE (Polytetrafluoroethylene) seals for improved performance with high heat and chemicals..
  • LIGHTWEIGHT - Pressure washer shut off valve made from lightweight materials with a rounded frame. 3/8" Female NPT Inlet x 3/8" Female NPT Outlet..
Check Stock

MTM Hydro Ball Valve for Pressure Washer Gun, Foam Cannons, High Pressure Power Washer Shut Off Valve Plated Brass 3/8” Female BSP 3000 PSI

  • PRESSURE WASHING BALL VALVE - Premium 3/8” Plated Brass Ball Valve for pressure washer guns. 3000 PSI Max Pressure rating. Max Temp 176 degrees Fahrenheit..
  • PLATED BRASS - Ball valve pressure washer made from plated brass, offering enhanced rust and corrosion resistance. Durable pressure washer accessories built for long-term use..
  • EASY SWITCHING - Power washing valve commonly found at the base of the high pressure washer gun. Enables quick shut off to switch between pressure washing guns without turning off the entire system..
  • HIGH QUALITY SEALS - High pressure ball valve with high quality PTFE (Polytetrafluoroethylene) seals for improved performance with high heat and chemicals..
  • LIGHTWEIGHT - Pressure washer shut off valve made from lightweight materials with a rounded frame. 3/8" Female BSP Inlet x 3/8" Female BSP Outlet..
Check Stock

6.0 POWERSTROKE KC STAGE 2 TURBO (04-07)

  • ◭ [Vehicle Application] : Injector Pressure Regulator Valve with Socket 6.0L Powerstroke Diesel Engines Fits for Ford 6.0L V8 Diesel Turbocharged Vehicles - for 2004-2010 Ford E-350 E-450, for 2003-2010 Ford Excursion, for 2003-2010 Ford F-250 F-350 F-450 F-550 Super Duty..
  • ◭ [Manufacturer Part Number] : Direct replace factory part AP63417 1846057C1 5C3Z9C968CA 5C34-9C968-CA W3250216 CM5126 and HTV102 for a proper fit, Include IPR Valve Seal Kit OE Number 3C3Z9H529A, AP0035.
  • ◭ [Function] : Precisely manufactured internal valves high quality diaphragms and springs to perform excellently under all engine operating conditions. Replaces Injector Pressure Regulator Valve and regulates the oil bypass circuit of the high pressure oil pump, that opens and closes to allow high pressure oil into the injectors.This enables the PCM to control fuel delivery by increasing the speed in which the IPR valve operates thus properly control the pressure in the high-pressure oil system..
  • ◭ [Material and Installation] : IPR Injector Pressure Regulator Valve, contructed of premium material for long lasting durability and reliability. Robu....
Check Stock

3/8” High Pressure Ball Valve for Pressure Washer Gun, Plated Brass Power Washer Shut Off Valve DN10, 3000 PSI (3/8" Female BSP)

  • 【100% No-risk Purchase】If you receive any problems with pressure washer ball valve, you can get a full refund or a new one for free! Please feel free to contact us if you have questions during use. We will give you a satisfactory answer within 12 hours. Customer satisfaction is our tireless pursuit..
  • 【Convenience and Safety】Ball valve for pressure washer gun is made of lightweight material, 3/8" Female BSP Inlet x 3/8" Female BSP Outlet with round frame. DN10 ball valve unique design can withstand high Pressure can be used for pressure washer gun, foam cannons and power washer..
  • 【Solid Structure】The power washer shut off valve is made of high quality plated brass for compactness, ruggedness, and enhanced rust and corrosion resistance for long-term worry-free use. The high pressure ball valve can reach a maximum working pressure of 3000 PSI and a maximum working temperature of 176 degrees Fahrenheit..
  • 【Leakproof Performance】Power wash ball valve with excellent PTFE (Polytetrafluoroethylene) seals provide perfect leakage protection and improves performance through high heat and chemicals. No need to ....
Check Stock

STYDDI Stainless Steel High Pressure Washer Shut-Off Ball Valve Kit with 3/8' Quick Connect for Power Washer Hose, 4500 PSI

  • BRINGS CONVENIENCE AND SAFE - The biggest advantage of using a pressure washer shut off ball valve kit is changing the implements safely and conveniently during cleaning. It allows you to switch from your surface cleaner to the gun or wand assembly without running back and forth to your engine to shut it down and release the pressure in the hose. When you maneuver about cleaning with a wand, it also helps to relieve fatigue..
  • 3/8” QUICK CONNECT - This is a professional pressure washer shut off ball valve kit that includes a ball valve, a 3/8″ quick coupler plug, a 3/8″ quick coupler socket and teflon tape. The set up comes unassembled but it gets assembled very easily. The ball valve fit is designed in a manner to persist high pressures..
  • PREMIUM MATERIAL ENSURES HIGH QUALITY - The shut-off ball valve is made of premium quality stainless steel, housing with stainless steel handle and insert. Great quality stainless steel brings durability and long rust free service life. It can attain maximum working pressure of 4500 PSI and maximum working temperature of 158 degree Fahrenheit..
  • EASY TO USE - The design pattern of this pressure washer shut-off ball valve is constructed in a way that it can sustain high pressure working and provide good leverage un....
Check Stock

Aupoko R134A Valve Core Quick Remover Installer, High Low Pressure Valve Core Remover Tools Kit for R13A Refrigerant Air Conditioner System

  • ★ USEFUL TOOL KIT ---- This valve core remover tools Kit includes high pressure (Red) and low pressure valve core quick remover installer, 1 pc valve core remover, 5pc R134a valve cores and 5pc 5V1 valve cores..
  • ★ HIGH & LOW PRESSURE QUICK COUPLER ---- High pressure coupler (Red), with inner diameter 16 mm, and Low Pressure coupler (Blue) with inner diameter 13 mm..
  • ★ ADJUSTABLE ---- The R12 valve core quick remover installer is adjustable to fit the different valve core. Good for vehicle/car/auto air condition, household air conditioner, HVAC Maintenance or repairing..
  • ★ WELL-DESIGN ---- Built-in stainless-steel ball valve: the well-designed ball valve and threaded remover lets the user block off the system while changing the valves cores, allowing for no refrigerant loss..
  • ★ 1 YEAR WARRANTY ---- Valve Core Quick Remover Installer sets are made by high quality brass alloy, last long.
  • easy to operate and install, strong sealing for durability and safety. We offter 12 months warranty, should be there any question, please feel free to contact us..
Check Stock

Gabrylly 8 Inch Rain Shower System with 15“ Grab Bar Handle，Brushed Nickel

  • 3 functions handheld shower head and single function rain shower head，8 inches rain shower head and handheld shower head offer consistent powerful shower even under low water pressure..
  • Pressure balancing valve cartridge, the valve body contains an adjustable water pressure device, this brass valve directs water flow to two showering functions, pressure-balancing valve maintains water pressure and controls temperature.
  • This shower set package includes: valve trim（include rough in valve）,rain shower head,handheld shower head, shower arm, and elbow，shower holder..
  • Grab bars for bathroom can be widely used for bathroom, shower, bathtub, toilet, kitchen, along stairways or in the laundry room. Not only apply to use as bath grips and safety bars, but also can be used as shower door handle and towel bar..
  • This grab handle is made of solid 304 stainless steel..
Check Stock

TOKHAROI 1/4’’ Quick Connect Inch Pressure Washer Ball Valve Kit, Carbon Steel Valve for Pressure Washer Hose, 4000 PSI

  • The ball valve kit is designed for high-pressure hoses.High pressure ball valve has 1/4’’ quick connector and 1/4’’ quick connect plug. Easy to connect ball valve to gun, nozzle, pump and hose..
  • The steel pressure washing ball valve kit is designed for pressure washer hose..
  • The max working pressure is 4000 PSI. The max working temperature is 158 F..
  • The ball valve is easy to turn on and off. It offers great leverage under high pressure..
  • Quick Disconnect Fitting: 1/4’’ quick coupler plug + 1/4’’ male NPT thread.
Check Stock

Boltigen Upgrade Handle Adjustable RV Water Pressure Regulator Valve, Brass Lead-Free Reducer with Gauge 160PSI and 4 Inlet Screened Filters,for RV Camper, Travel Trailer, or Garden…

  • 【Adjustable Handwheel Design】The rv water pressure regulator valve designed with handle adjustment. Compared with the old RV water pressure regulator valve, this upgrade brass Lead-Free handle adjustable water pressure reducer is more convenient use and operation. Adjustable handle for easy pressure adjustment without any tools. Handle adjustable water pressure regulator for rv camper and travel trailer.
  • 【Product Standard】Maximum Regulator gauge rang 0-160 psi, water pressure setting can be easily adjusted by turning handwheel. Turn clockwise to increase pressure, turn counterclockwise to decrease pressure. And the adjustable rv water pressure regulator's size standard: 3/4" hose female inlet and 3/4" hose male outlet, fits for garden hose & 3/4" NH,compatible with America almost all water system.
  • 【No Lead-Free Material】The adjustable rv water pressure regulator valve is made of C46500 lead-free brass, manufactured by hot casting process technology. Our every adjustable rv water regulator is tested to contain less than 0.13% lead, well under the NSF lead-free requirements of 0.25%, safe and healthy for drinking system.
  • 【Adjustable RV Water Pressure Regulator Kit】The rv water pressure regulator valve kit comes with 1 adjustable rv water r....
Check Stock

RIDGE WASHER High Pressure Ball Valve Kit for Power Washer Hose, 3/8” Quick Disconnect, 4500 PSI

  • High pressure ball valve kit includes a ball valve and two adapters. The adapter set converts 3/8” quick coupler plug to 3/8” male NPT thread and 3/8” quick coupler socket to 3/8” male NPT thread..
  • Working pressure is up to 4500 PSI. The max working temperature is 158 °F..
  • The steel pressure washing ball valve is superior leak resistance. Easy to connect ball valve to gun, pump and hose..
  • The ball valve is easy to turn on and off, provides good leverage under high pressure, designed for high-pressure hose..
  • If you have questions, contact us at any time. We provide a service of quick reply within 24 hours. Welcome to RIDGE WASHER to see other pressure washer accessories..
Check Stock

PPE Race Fuel Valve for 2004.5-2010 Duramax LLY/LBZ/LMM 113073000 with PPE Viton O-Ring Upgrade for PPE Race Fuel Valve

  • The PPE Race Fuel Valve (heat treated stainless steel construction) replaces stock or a shimmed pressure relief valve..
  • This valve helps maintain fuel rail pressure during high engine load conditions by completely blocking the pressure relief port (effectively eliminating fuel return to the fuel tank). It eliminates potential low fuel rail pressure DTC codes P1093 or P0087 (low fuel rail pressure during power enrichment) that are caused by insufficient PRV spring pressure..
  • Kit Includes PPE Viton O-Ring 1137073001.
Check Stock

Gabrylly Shower System Brushed Gold, Rainfall Shower Faucets Set Complete, 8\ Rain Shower head System with Handheld Shower Head Set, Pressure Balance Shower Valve Fixtures

  • HIGH PRESSURE SHOWER SYSTEM: 3 functions handheld shower head and single function rain shower head，8 inches rain shower head and handheld shower head offer consistent powerful shower even under low water pressure..
  • PRESSURE BALANCE SHOWER VALVE:Pressure balancing valve cartridge，the valve body contains an adjustable water pressure device, this brass valve directs water flow to two showering functions, pressure-balancing valve maintains water pressure and controls temperature..
  • BRUSHED GOLD SHOWER SYSTEM:The elegant brushed gold finish and sleek look shower system complements any décor.
  • EASY INSTALL SHOWER FAUCET: Designed to easily install with standard U.S. plumbing connections. Products are in compliance with the following standard(s): ASME A112.18.1-2018/CSA B125.1-18.
  • SHOWER SET INCLUDE: Shower valve,rain shower head,handheld shower head, shower arm, and elbow，shower holder..
  • 5-YEARS GUARANTEE: We provide 5 years free replacement of any shower parts.
Check Stock

Universal Replacement Floater and Sealer for Power Pressure Cookers/Relief Jigger Valve for Pressure Cookers Safe Regulator Weight Pressure Control 80KPA 1.5 Inch

  • Floater Valve/Sealing Ring/ Jigger Valve is are essential for pressure cooker to work Under normal situation,floater valve inserts into the lid from outside to inside. The floater valve locks the floater from inside, keeping the floater valve in place.
  • The sealing ring is often washed off, leaving the floater valve loose and the pressure cooker unusable，This floater valve and sealing ring set fits the lids of almost all pressure cooker universally.
  • This floater and sealer set fits many models of the Power Pressure Cookers including but not limiting to XL (6 & 8 quarts), YBD60-100, PPC780, PPC770, PPC790 ,CSG60, IP-CSG50, IP-LUX60 and IP-LUX50. It does not fit IP-DUO50 or IP-DUO60.
  • Pressure Cooker Jigger Valve External Size (Approx) : 2.6 x 3.8cm/1″x 1.5″(D*H)，Bottom Hole Dia : 10mm / 0.4″，Weight : 127g.
  • Please check the pictures to see the sizes of the set before buying.
Check Stock