Reviews Part Epoxy Resin Floor Paint

ABN 32oz Paint Mixing Cup Lids 100 Pack - Epoxy Resin Supplies Automotive Paint Mixing Cup Lids, Clear Plastic Quart Epoxy Measuring Cup Lids

  • [Secure Leftover Supplies]: Avoid spills and stains by sealing up your extra unused supplies and keeping your garage floor safe with the airtight ABN Auto Paint Mixing Measuring Cup Lid 100pk.
  • [Airtight Storage]: With these epoxy mixing cup lids, you can pick up where you left off without worrying about partially cured resin or dried out paint.
  • [Easily Peek Inside]: Clear small plastic mixing up lids allow for easy identification of leftover pre-mixed paint colors, baking ingredients, or epoxy resin finish.
  • [Fits Your Tub]: Compatible with the ABN 32oz Plastic mixing cups for auto paint, epoxy resin, or baking.
  • Additionally fits any 4.5-inch diameter 1 quart mixing cups (11.4cm, 946mL).
  • [Contents Made in USA]: Package includes 100 USA made car paint mixing cup lids.
  • Sourced and created in America for your mixing needs.
Check Stock

TotalBoat Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Gallon, Traditional)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

TotalBoat-403794 Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Pint, Traditional)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

SUMERBOX Clear Cast Epoxy Resin Kit Cast Resin 13.8 Ounce 32 Assorted Colors Mica Powders Measuring Cups Tip Applicator Bottles Gloves Pipettes Mixing Sticks Clear Spoons

  • Clear Cast Bundle: Including 6.9 fl.oz. Resin part, 6.9 fl.oz.Hardener part, 32 Assorted Colors Mica Powders, Plastic Cups, Silicone Graduated Cups,....
  • Epoxy Resin (13.8 fl.oz.): Easy mix 1:1 ratio by volume and relaxed 40-minute operation time which reduce the operating error rate. Self-leveling,....
  • 32 Color Pigment Powder Selection: Mica Powders (0.18oz Each Bag), epoxy resin dye is a high quality product, full of vivid, colorful pigments. Our....
  • Epoxy Resin Mixing Kit: Wooden Craft Sticks make great for mixing resin, paint, ink and other liquids. Silicone Graduated Cups make measure and mixing....
  • Practical Accessories for Glitter Tumblers: Pipettes for dropping the perfect amount of liquid. Tip Applicator Bottles to place resin in even the....
Check Stock

TotalBoat Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Quart, Cold Weather)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

TotalBoat-487750 Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Gallon, Cold Weather)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

TotalBoat-492063 Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Pint, Cold Weather)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

TotalBoat Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Half-Gallon, Traditional)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

TotalBoat Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Half-Gallon, Cold Weather)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

Resin Color Pigment- 28 Colors Epoxy Resin Pigment, Resin Dye Liquid for UV Resin Color, High Transparent Epoxy Color Pigment Tint, UV Epoxy Resin Color Pigment

  • ღ【Resin Color Pigment 28 Colors】All the colors pf epoxy resin pigment are the transparent(white color is translucent), you can mix the resin color pigment white color with other colors to achieve Transparently . Feel free to blend epoxy resin pigment with epoxy resin and UV resin both will get the best color effect!.
  • ღ【Transparent Resin Dye Tint】 The resin dye mix well into the epoxy resin, Just need a few drops and you will be surprised by the color effect. You can freely control the intensity of the color, slowly adding one drop at a time until the desired color is obtained, Can also mix with another epoxy color pigment colorant to achieve the desired color..
  • ღ【Suitable For Epoxy Resin Color Pigment】 This epoxy resin color pigment can be widely used on resin jewelry, such as epoxy resin art, resin petri dish making, resin painting, resin coasters, tumbler making..
  • ღ【SIMPLE TO USE】 With a specially designed nozzle, the transparent and soft bottle can easily squeeze the epoxy resin paint from the bottle, and you can easily control epoxy dye dosage..
  • ღ【Safety & Multipurpose】: Our resin pigment liquid is odorless, non-toxic and non-irritating, each resin colorant 0.35oz/10ml, epoxy resin dye is perfectly suited for resin ....
Check Stock

TSSART Resin Tape for Epoxy Resin Molding - Thermal Silicone Adhesive Tape, Oxidation and High Temperature Resistance Easy Peeling, Epoxy Release Tape for River Tables - 2 inch Wide 54FT Long

  • HIGH TEMPERATURE RESISTANCE: TSSART resin tape can withstand up to 200℃ for half an hour making it is able to work in craft projects like high-temperature paint,etc. Our resin tape won’t curl or melt like other tapes is perfect for your epoxy resin projects..
  • EASY PEELING: TSSART resin tape can be easy to peel without leaving adhesive residue which will destroy your work. This tape won’t stick to your finished resin epoxy and is easy to work with as it removes quickly and cleanly from resin epoxy. This premium resin tape works great when working with 2 part epoxy molds, an epoxy resin table or as an encapsulation tape..
  • CHEMICAL & UV RESISTANT: This epoxy resin tape retains adhesion when exposed to chemicals, high heat and light making it ideal for crafting and working with professional marine grade epoxy..
  • SILICONE ADHESIVE TAPE FOR POWDER COATING: This high heat silicone adhesive is suitable for high temperature applications and can be used as a powder coat tape and photo-splicing tape. This high temp silicone adhesive tape is heat and chemical resistant making it ideal for powder coating, splicing ,etc..
  • SATISFACTION GUARANTEED- TSSART stand behind our products 100% and if for any reason you are not completely satisfied, simply contact us and we....
Check Stock

TSSART Resin Tape for Epoxy Resin Molding - Thermal Silicone Adhesive Tape, Oxidation and High Temperature Resistance Easy Peeling, Epoxy Release Tape for River Tables - 5 inch Wide 108FT Long

  • HIGH TEMPERATURE RESISTANCE: TSSART resin tape can withstand up to 200℃ for half an hour making it is able to work in craft projects like high-temperature paint,etc. Our resin tape won’t curl or melt like other tapes is perfect for your epoxy resin projects..
  • EASY PEELING: TSSART resin tape can be easy to peel without leaving adhesive residue which will destroy your work. This tape won’t stick to your finished resin epoxy and is easy to work with as it removes quickly and cleanly from resin epoxy. This premium resin tape works great when working with 2 part epoxy molds, an epoxy resin table or as an encapsulation tape..
  • CHEMICAL & UV RESISTANT: This epoxy resin tape retains adhesion when exposed to chemicals, high heat and light making it ideal for crafting and working with professional marine grade epoxy..
  • SILICONE ADHESIVE TAPE FOR POWDER COATING: This high heat silicone adhesive is suitable for high temperature applications and can be used as a powder coat tape and photo-splicing tape. This high temp silicone adhesive tape is heat and chemical resistant making it ideal for powder coating, splicing ,etc..
  • SATISFACTION GUARANTEED- TSSART stand behind our products 100% and if for any reason you are not completely satisfied, simply contact us and we....
Check Stock

TSSART Resin Tape for Epoxy Resin Molding - Silicone Thermal Adhesive Tape, Oxidation and High Temperature Resistance Easy Peeling, Epoxy Release Tape for River Tables - 2 inch Wide 108FT Long

  • HIGH TEMPERATURE RESISTANCE: TSSART resin tape can withstand up to 200℃ for half an hour making it is able to work in craft projects like high-temperature paint,etc. Our resin tape won't curl or melt like other tapes is perfect for your epoxy resin projects..
  • EASY PEELING: TSSART resin tape can be easy to peel without leaving adhesive residue which will destroy your work. This tape won't stick to your finished resin epoxy and is easy to work with as it removes quickly and cleanly from resin epoxy. This premium resin tape works great when working with 2 part epoxy molds , an epoxy resin table or as an encapsulation tape..
  • CHEMICAL & UV RESISTANT: This epoxy resin tape retains adhesion when exposed to chemicals, high heat and light making it ideal for crafting and working with professional marine grade epoxy..
  • SILICONE ADHESIVE TAPE FOR POWDER COATING: This high heat silicone adhesive is suitable for high temperature applications and can be used as a powder coat tape and photo-splicing tape. This high temp silicone adhesive tape is heat and chemical resistant making it ideal for powder coating ,splicing ,etc..
  • SATISFACTION GUARANTEED- TSSART stand behind our products 100% and if for any reason you are not completely satisfied, simply contact u....
Check Stock