Reviews Paint For Pla 2

eSUN PLA-LW PLA 3D Printer Filament 1.75mm 1KG Spool Lightweight Strong Paint Adhesion Foaming PLA Filament for 3D Printers 3D Printed Airplane Natural

  • 【Low density & High Foaming Volume Ratio】ePLA-LW has applied active foaming technology to achieve lightweight, low-density PLA parts. The highest....
  • 【Clog-free & No Warping & Less-tangle 】Full mechanical winding and strict manual examination ensure tangling free and avoid filament breaking and....
  • 【Easy to Paint & Wide Application】eSUN ePLA-LW lighweight PLA filament is very easy to paint and has a strong adhesion of surface paint. So it is....
  • 【Good Interlayer Adhesion & Matte Printing Effect】 Compared to wood PLA filament,ePLA-LW filament has more stable interlayer adhesion, and the....
  • 【Foaming When Printing】At around 210°C-270°C, this filament starts to foam during printing, increasing its volume by nearly 1.2 times, and the....
Check Stock

AMOLEN PLA 3D Printer Filament Glow PLA Filament Blue Green 1.75mm Teal PLA Filament 3D Printing Filament 1KG/2.2lb

  • 【Glow PLA Filament】 - Glow Filament Blue Green Contains 20% glow powders that glow in the dark after absorbing light energy. Exposure to the....
  • 【Upgrade Glow Filament】- AMOLEN PLA Filament using the most advanced PLA glow materials that glow in the dark after absorbing light energy. All....
  • 【High Compatibility】 - AMOLEN Glow PLA Filament is Perfectly compatible with most of the FDM 3D Printer, MakerBot, LulzBot, FlashForge, UP,....
  • 【Gift or DIY Painting For Kid】 - When not glow, the filament shows white and clear, which is very suitable for painting. Your child can paint it....
  • 【Reusable Bag & After Sales Warrant】 - Vacuum packaging with desiccant to keep it dry and keep out dust, enable much smoother and more stable....
Check Stock

Everyglow Glow in The Dark 3D Printer Filament, 1.75mm PLA Filament Fits for Most FDM Printers 1KG (2.2 LBS) Spool Dimensional Accuracy +/- 0.03 mm (Rose Pink)

  • 【GLOW PLA FILAMENT】Contains 30% luminous powders that glow in the dark after absorbing light energy. Exposure to the strong sunlight or UV light for only 1 minutes will get an amazing glow effect, but too long exposure time may damage the glow filament. Glow green pla filament has the best luminous effect..
  • 【DIMENSIONAL ACCURACY】1.75mm diameter,1kg pla spool,recommended extrusion/nozzle temperature: 190°C - 230°C,dimensional accuracy + / - 0.03mm. Advanced CCD diameter measuring and self-adaptive control system provide a smooth printing experince.That is perfect for PLA filaments..
  • 【PREMIUM QUALITY 1.75MM PLA FILAMENT】Uniform winding of 3D printer filament free of getting tangle.Full mechanical winding and strict manual examination guarantee the PLA filament is tidy and easy to feed. To avoid being tangled, insert filament end into spool holes after every use.Strong layer adhesion leads to the first perfect printed layer..
  • 【PACKAGING 】Vacuum packaging with desiccant to keep it dry and keep out dust and foreign objects away, prevent nozzle jams..
  • 【GIFT FOR KIDS】 Your child can paint it with any colors. It will stimulate children's imagination, creativity and practical ability..
Check Stock

Shiny Silk Gold Silver Copper PLA Filament Bundle, 1.75mm 3D Printer Filament, Each Spool 0.5kg, 3 Spools Pack, with One 3D Printer Remove or Stick Tool MIKA3D

  • ... - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm.
  • ✔GIFT FOR KID - When not glow, the filament shows white and clear, which is very suitable for painting. Your child can paint it with any colors. It will stimulate children's imagination, creativity and practical ability. AMOLEN Glow pla filament is a wonderful gift for children..
  • ✔VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage.
Check Stock

Inland Tough PLA 3D Printer Filament 1.75 mm – Tougher Than PLA+ - Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – High Impact Strength- Black

  • ...nsure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
  • EASY-TO-USE: Inland Tough PLA filament is as easy to use as regular PLA, but has higher impact resistance. Tough PLA is engineered for strength and durability and is often compared to ABS for its mechanical characteristics. Produce your best print with our no-clog, bubble-free durable Tough PLA. The Inland filament can be used with most FDM and FFF 3D Printers..
  • HIGH-QUALITY TOUGH PLA: The Tough PLA is non-toxic and tightly wound on its cardboard spool. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • TOUGH PLA FEATURES: Tough PLA Filament is as easy to print as regular PLA, but with higher impact resistance. Tough PLA is engineered for strength and durability while taking advantage of the reliability and ease-of-use that PLA is known for. Odorless tough PLA doesn't give off a toxic smell during printing. It's generally considered an odorless filament..
Check Stock

HATCHBOX Paint-Free ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Blue

  • FILAMENT SPECS: SIZE: 1 kg (approximately 2.20 lbs) Spool, 1.75 mm Filament Diameter (Dimensional Accuracy +/- 0.03 mm), TEMPERATURE: Recommended Extrusion/Nozzle Temp 220°C - 250°C (428°F - 770°F).
  • SMOOTH PAINT FREE ABS FILAMENT: Save time and money while avoiding toxic vapors with a filament that only requires minimal finishing! Hatchbox ABS looks great after a quick manual polish, eliminating the need for paint. Print fully-functioning prototypes, models, auto parts, enclosures and electronic components with a cost-effective solution and nearly effortless process..
  • BEGINNER & EXPERT FRIENDLY: Hatchbox 3D Filaments are made with quality and consistency in mind, making it easy for novice users to get started with basic settings. Seasoned printers can push their designs to the limit without worrying about purity, tolerance or defect issues..
  • REAL-WORLD DURABILITY: ABS PFR is more impact resistant than PLA and also suitable for use at higher temperatures, enabling a broader range of applications. Each spool is vacuum-sealed with moisture-absorbing desiccant to ensure clog, bubble, and tangle-free printing..
  • WHY HATCHBOX? We’re proud to be known in the 3D printing community for producing the highest quality PLA on the market, with the largest selec&#....
Check Stock

HATCHBOX Paint-Free ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Silver

  • FILAMENT SPECS: SIZE: 1 kg (approximately 2.20 lbs) Spool, 1.75 mm Filament Diameter (Dimensional Accuracy +/- 0.03 mm), TEMPERATURE: Recommended Extrusion/Nozzle Temp 220°C - 250°C (428°F - 770°F).
  • SMOOTH PAINT FREE ABS FILAMENT: Save time and money while avoiding toxic vapors with a filament that only requires minimal finishing! Hatchbox ABS looks great after a quick manual polish, eliminating the need for paint. Print fully-functioning prototypes, models, auto parts, enclosures and electronic components with a cost-effective solution and nearly effortless process..
  • BEGINNER & EXPERT FRIENDLY: Hatchbox 3D Filaments are made with quality and consistency in mind, making it easy for novice users to get started with basic settings. Seasoned printers can push their designs to the limit without worrying about purity, tolerance or defect issues..
  • REAL-WORLD DURABILITY: ABS PFR is more impact resistant than PLA and also suitable for use at higher temperatures, enabling a broader range of applications. Each spool is vacuum-sealed with moisture-absorbing desiccant to ensure clog, bubble, and tangle-free printing..
  • WHY HATCHBOX? We’re proud to be known in the 3D printing community for producing the highest quality PLA on the market, with the largest selec&#....
Check Stock

AMOLEN 3D Printer Filament Glow in The Dark Multicolor PLA Filament, 3D Printing Filament Color Change in 10 Meters, 1KG

  • ...ITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm.
  • GIFT FOR KID - When not glow, the filament shows white and clear, which is very suitable for painting. Your child can paint it with any colors. It will stimulate children's imagination, creativity and practical ability. AMOLEN Glow pla filament is a wonderful gift for children..
  • VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage.
  • ONE MONTH WARRANTY - Any problems, please contact us for free replacement or full refund. AMOLEN is committed to devolop high-quality and special filament..
Check Stock

ATARAXIA ART Flexible PLA Filament, PLA 1.75mm, 3D Printer Filament,1kg/2.2lb, Better Than TPU, 89A Shore Hardness, Patent Formula, Compatible Bowden Extruder, with Filament Storage Bag, PLA Sky Blue

  • ☀【Patented Flexible PLA Formula & 89A Shore Hardness】 - Ataraxia Art Flexible PLA plus filament is a patented formula that took years to perfect & release. Flex PLA is more flexible than TPU & easier to use. Flexible Pla elongated at break more than is 500-600 % so Flexy filament can be stretch 5 to 6 times higher more than any 3d printer filaments.3d printer filament Flexible PLA is used for great variety of project like shoe insoles, Arts & Crafts, DIY, phone case, gifts, belt & decoration..
  • ☀ [ Wide Pantone Match Colors Option For Flexible Stretch PLA] - Ataraxia art offer Flexible PLA Plus Filament 1.75mm in Auto winding 1kg./2.2lb spool, . Ataraxia FPLA is also available in the following Pantone Matched colors: Red, Black, Yellow, Gold, Violet, White, ivory white, Blue, sky Blue, Green, prusa Orange, Light Brown, Brown, Slate Gray, Pink & chocolate. To match exact color code please refer our Pantone code in our product image..
  • ☀ 【 Compatible with Bowden Extruder and Direct Drive 】- Ataraxia Flexible PLA Filament 1.75mm Works with any 3dprinter, regardless of it being direct drive or Bowden extruders. TPU filament 1.75mm on ....
Check Stock

Pioneer Trail

  • TAKE YOUR GAME TO THE NEXT LEVEL. Our tabletop terrain is a fun, enchanting, and interactive 3D alternative to paper adventure maps or a plain old dry erase RPG battle mat..
  • GREAT VALUE. Set includes 6 of our 2 x 2" tiles and 35 connectors to interlock them together and with other EnderToys Terrain sets. We offer more than our biggest competitors for less!.
  • COMPATIBLE. Suited for 25mm and 28mm miniatures and props. Our dungeon tiles feature 1" square floor panels to match the standard grid system set by classic role playing games..
  • MADE IN THE USA. 3D printed in Las Vegas, NV using PLA, an eco-friendly plastic—color may slightly vary depending on available material..
  • NO GLUE REQUIRED, MODELS ARE SUPPLIED UNPAINTED. Primer is necessary for paint to adhere properly..
Check Stock

iSANMATE Wood Filament 1.75mm, PLA+ Wood Filament 1.75mm, 3D Printer Filament 1kg/Spool (20% Wood Powder+80% PLA)

  • 【Parameter】-iSANMATE Wood PLA+ Filament Print Temperature：190℃-225℃. iSANMATE PLA+ filament dimensional: 1.75mm,accuracy +/- 0.03mm, 1KG (2.2LBS)..
  • 【Wood PLA+】- iSANMATE Wood Filament is made up of 20% wood flour and 80% PLA+ with wood color and texture.Able to make products with woody touch.
  • 【High Quality】- iSANMATE Wood PLA + filament has superb layer bonding, and strength and toughness are greater than conventional PLA filament. Easy to use.
  • 【Spool Size】- Spool Diameter:197mm(7.76").
  • 64mm( 2.52") - Spool Hub Hole Diameter: 57mm(2.24")..
  • 【100% Satisfactory Service】-1 year warranty. Provide fast and efficient technical solutions when you have any printing problems. With 24 hours guaranteed reply..
Check Stock

JAYO PLA+ 3D Printer Filament Bundle, PLA Pro Filament 1.75mm, Neatly Wound Filament 2.5kg, 250g Spool, 10 Pack, Black+White+Grey+Red+Orange+Blue+Green+Yellow+Wood Color+Transparent

  • ...sure JAYO PLA+ filament neat and easy to be fed. Say goodbye to the tangling problem and unstable printing process..
  • 【1.75mm Filament Diameter】JAYO PLA Plus 3D printer filament has 1.75 mm diameter, dimensional accuracy +/- 0.02 mm, accurate diameter making it suitable for almost FDM 3D printers..
  • 【PLA+ Recommend Settings】We recommend printing the PLA+ filament at a nozzle temperature of 210-235°C, bed temperature of 55-65°C, printing speed of 50-100mm/s..
Check Stock

PLA 3D Printer Filament 1.75mm SUNLU PLA Filament Dimensional Accuracy +/- 0.02 mm 1 kg Spool PLA 1.75 Black

  • 【1KG(2.2 lbs) Spool】Spool Diameter: 8.00"-Spool Width: 2.50"-Spool Hub Hole Diameter: 2.20". SUNLU Strong Coils Design Help Your 3D Printing More....
  • 【1.75mm PLA Filament】SUNLU PLA 3D Printer Filament 1.75mm, PLA 1.75 Dimensional Accuracy +/- 0.02mm. No Pungent Smell in Printing, No Harm to User....
  • 【Tangle Less & Clog-free & Bubble-Free】Full Mechanical Winding and Strict Manual Examination, Which Guarantee the SUNLU PLA filaments tidy and....
  • 【High Compatibility】SUNLU PLA Filament Works Perfectly with Most FDM 3D Printers on the Market, Such as Ender 3, CR 6, A 8, CR 10, Maker Bot, Mono....
  • 【Recommend Settings】PLA Filament Extrusion/Nozzle Temperature 215-230℃, Bed 70℃-80℃. SUNLU 3D Filament are the Most Common Used Filaments....
Check Stock