Reviews Oxygen Gas Analyzer

Pro-Series Ethanol Test Kit with 2 Reusable Testers for Ethanol, E85, Gasoline, Race Gas, Ethanol-Free Fuel Tester

  • Replacement Filters for AUTOplus5 Exhaust Gas Analyzer.
  • Used for the water trap of the Autoplus5 Exhaust Gas Analyzer.
Check Stock

Invacare Check O2 Plus Oxygen Analyzer, Prescription Required, IRC450

  • Three measurements rolled into one oxygen analyzer for ultimate convenience.
  • oxygen purity, flow rate and outlet pressure.
  • Two AA batteries provide over 16,000 readings.
  • Protective boot helps increase product integrity.
Check Stock

Gas Detector, ACEGMET 4 Gas Monitor Multiple Indicator (Vibration, Audible, Visual) H2S, O2, CO and LEL 4 Gas Monitor Personal Rechargeable 4 Gas Meter 2 Years of Sensor Life Gas Sniffer

  • ... The durability of the 4 gas meter for natural gas is the most important factor that we actually took into serious consideration. We understood the fact that some of these devices develop faults after a very short usage period. Therefore, we made sure that every exhaust gas analyzer on our last came with very durable and long-lasting materials. Also, to ensure the safety of the user, we recommend using the zero adjust function for calibration.
  • The 4 way gas monitor is placed with a belt clip to connect to clothing when inspecting, working and assessing a confined space. It is used for personal protection. If any of the 4 gas pass the alarm preset levels, the unit will alarm to give you a warning. Equipped with high-capacity rechargeable battery. Meet a full day of use. Keeps you safe at all times.
  • You wouldn’t want to get a gas detector that goes bad after a few weeks or months so that you have to replace it. Instead, you need something that is very durable and you are certain that it would not malfunction shortly after you begin to make use of it. The service life of the sensor is between 15 and 24 months. We offer an 12 ....
Check Stock

Gas Flowmeter, LZQ-7 Flowmeter 1-10LPM Flow Meter with Control Valve for Oxygen Air Gas

  • INSTRUCTIONS -- This gas meter is connected to hose to measure unidirectional gas flow.
  • MADE OF HIGH QUALITY ACRYLIC -- Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure.
  • IT IS SIMPLE TO USE -- It is simple to use, and has 8mm barbs for convenient connection to hoses.
  • MEASURABLE GAS -- Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, oxygen, compressed air, argon.
  • MAINLY USED FOR -- Mainly used for detecting the oxygen flow, control oxygen flow and can be used in industry.
Check Stock

Testo 0563 3110 310 Combustion Analyzer Kit with Printer

  • testo 310 Residential Analyzer Kit with printer.
  • Handheld instrument for residential flue gas analysis.
Check Stock

Dissolved Oxygen Meter,Portable Oxygen Meter Range:0-40mg/L,Dissolved Oxygen Test Kit with Electrode Filling Fluid,Aquarium Water Test Kit

  • ...emperature compensation of 0-40 ℃ can meet normal use.Dissolved oxygen meter digital screen display with backlight makes data reading more clear and convenient.Auto power-off in 8 minutes if not using it and can low battery indication..
  • Compact pen-shape design of oxygen analyzer, lightweight for mobility,In order to better take care of the small pets in our family water, they can become healthier.The aquarium water test kit is a good choice.Through dissolved oxygen test kit you can test water anywhere to get the purest water..
Check Stock

Tube Type Acylic Flowmeter, Air Flowmeter Oxygen Flowmeter,LZQ-5 Flowmeter 2.5-25 LPM Flow Meter with Control Valve for Oxygen/Air/Gas

  • 【FUNCTION】- This gas meter is connected to hose to measure unidirectional gas flow..
  • 【QUALITY MATERIALS 】- Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure..
  • 【EASY TO USE】- It is simple to use, and has 8mm barbs for convenient connection to hoses..
  • 【WIDE USE】- Mainly used for detecting the oxygen flow, control oxygen flow and can be used in industry.Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, oxygen, compressed air, argon, toluene, benzene, xylene, hydrogen sulfide, sulfur dioxide, ammonia, etc..
  • 【PROFESSIONAL AFTER-SALES SERVICE】- We guarantee the product is 100% brand new. Please feel free to contact us if you have any problems about our product, then we will make every effort to resolve it for you,and give you a satisfactory answer..
Check Stock

Oxygen Gas Liter Flow Meter Measures 0-8LPM by Tina's Homecare

  • The Oxygen Liter Meter is a small, lightweight device that can be used to quickly verify the flow of gas..
  • Reads 0-8 liters per minute by just attaching your supply line to the bottom and holding in the upright vertical position and locating the center of the ball..
  • This is a great way to verify your home oxygen equipment is accurately dispensing the proper amount of oxygen!.
  • The Liter Meter is only to be used for a quick assessment of the flow of gas from your oxygen concentrator or regulator. Please note this device only verifies the flow and not the quality or purity of the gas..
Check Stock

4-Gas CO HC CO2 O2 Exhaust Gas Analyzer Emissions Testing Portable Handheld

  • Battery powered and self-contained infrared gas analyzer.
  • Accuracy: all channels 5 % relative to gas reading.
  • Repeatability: all gas channels +/- 3% full scale.
  • Fuel selection: Allows HC to be measured and displayed as Hexane for Gasoline, Propane for LPG, and Methane for CNG..
Check Stock

Heavy Duty Cutting Torch, Oxygen/Acetylene Cutting Welding Torch Stainless Steel Gas Welding Burning Torch for Industrial Workshops, Metal Cutting and Welding

  • Heavy Duty Cutting Torch, Oxygen/Acetylene Cutting Welding Torch Stainless Steel Gas Welding Burning Torch for Industrial Workshops, Metal Cutting and Welding.
  • Great for Different Gas: suitable for Oxygen-acetylene, propane, butane, natural gas and liquefied petroleum gas. Before the torch is ignited, the air-tightness of the air valves at the connection should be checked. the newly used cutting torch, the shooting and suction capacity should also be checked..
  • Cutting and Welding: Cutting range: 3-150mm / 0.12-5.90 inches, welding range: 9mm / 0.35 inches. Thread 7/8-20 at the nozzle, thread 9/16-18 at the gas port. Please see photo for more details..
  • No Gas Leakage: Conical step leakage proof interface is stable and firm, possesses good sealing, no falling off, no air leakage, durable and safe to use. When the cutting torch is ignited, the acetylene valve should be opened first, and then the oxygen valve should be opened, and the mouth should not point to people or animals..
  • Multi-purpose: Widely used in workshops, metal cutting and welding, mechanical maintenance, and more. If you have any questions or concerns, please be sure to send us a message, thank you!.
Check Stock

Mini Oxygen Torch Kit, Micro Oxygen Acetylene/Butane Gas Welding Torch with 5pc Tips for Jewelry Repair

  • 【High Performance】This mini torch can work with propane, acetylene, hydrogen, propylene, natural gas etc to finish jewelry repair work.Two connectors mix the oxygen and acetylene ( gas), to get high performance welding flame. The green one connect with oxygen and red connect gas (Acetylene/Butane/Propane).
  • 【Multiple Tips】Equipped with 5pcs replacement tips to meet different application accordingly . The 5pcs tips are 1/8, 3/8, 5/8, 3/4, 7/8(mm)..
  • 【Micro Torch】Micro oxygen torch with 2M long trachea to realize various requirements of cutting ,welding/soldering work,easy to use. Dual connectors , mix oxygen with propane/ acetylene/ butane to get strong welding torch..
  • 【Temperature】Max. Temperature can reach 1700°C (3092°F). with this temperature,can easily melt/cut metals iron, gold, silver and copper..
  • 【Widely Application】Suitable for welding kinds of precision product, such as goldsilverK goldplatinumpalladium pperlead tin alloy and some other crafts.such as welding, jewelry repair and construction, crafts, metal sculpture, glass blowing, and electronics repai....
Check Stock

Victor Machine Track Torch Complete Rebuild/Repair Kit, MT200 MT300

  • Designed for medium duty gas welding and cutting operations.
  • Industrial regulator at an economical price.
  • Color-coded knobs for easy gas identification.
  • 2-inch easy-to-read high contrast gauges.
  • Regulator bonnet is made from a high-strength alloy.
Check Stock

CNBTR Multicolor Acrylic 3-30LPM LZQ-7 Oxygen Air Gas Flowmeter with Control Valve for Oxygen Adjustable

  • Used to measure single-phase non-pulsating gas flow.
  • Mainly used to detect oxygen flow, and control the flow of oxygen.
  • It can be used in industrial situations, oxygen bar and hospitals need to calculate the gas flow.
Check Stock