Reviews Oxygen Flow Regulator

RX WELD Air Acetylene Torch Kit Fuel Gas kit Professional Series

  • ... with appropriate tips. The operator can change the flame length according to his exact requirements by adjusting the oxygen and gas valves on the torch body..
  • 【Safe & Easy to Operate】 The acetylene torch kit control adjustments are easy to operate, making your welding job so much easier. The Oxygen & Acetylene regulator includes 2.5" diameter gauges to display accurate pressure, so you can easily adjust your gas flow rate with the built -in flow meter. The built-in check valves eliminate the reverse flow of gases, increasing safety..
  • 【Multiple Applications】 The torch kit is easy to handle and can be used in a wide range of fields. This welding torch tool set is a great choice for both an amateur metalworker or a professional. It's perfect for a multitude of applications such as farm, ranch, hobby metal store, construction site, automotive, refrigeration, light fabrication and repair..
  • 【Portable Welding Tool kit】 The complete welding and cutting torch tool set includes 1 x oxygen regulator, 1 x acetylene regulator, 1 x torch handle, 1x cutting attachment, 1 x goggles, 1 x rosebud heating tip, 3 x welding tips, 1 x twin hose and 1 x carrying case. It is easy to carry and is basically free from use restrictions..
Check Stock

Oxygen Gas Liter Flow Meter Measures 0-8LPM by Tina's Homecare

  • The Oxygen Liter Meter is a small, lightweight device that can be used to quickly verify the flow of gas..
  • Reads 0-8 liters per minute by just attaching your supply line to the bottom and holding in the upright vertical position and locating the center of the ball..
  • This is a great way to verify your home oxygen equipment is accurately dispensing the proper amount of oxygen!.
  • The Liter Meter is only to be used for a quick assessment of the flow of gas from your oxygen concentrator or regulator. Please note this device only verifies the flow and not the quality or purity of the gas..
Check Stock

ProMaker Home Brewing Stainless Steel Diffusion Stone Inline oxygenation Aeration Aerator Kit Oxygenation Diffuser for Wort Chiller Kettle Pump Beer Brewing Stone Kit

  • 【High Quality】:Stainless Steel 2 micron diffusion stone and parts make it more durable and keep beer fresh taste.
  • 【Aeration and Oxygenation Kit】:1/2'' MPT Homebrew Inline Aeration/Oxygenation Diffusion Stone with barb fitting,full Kit comes ready to assemble to your equipment.
  • 【 Brewing Tools】Oxygenate wort thoroughly to insure a healthy fermentation and carbonate quickly,connects inline with third fitting connected to your oxygen regulator. The oxygen stone will aerate your wort as they flow through..
  • 【Simple Assembly】:1/4" barb inlet for oxygen regulator or air pump connection,1/2" Hose barbs for beer flow,it can connects inline with any Kettle, Pump, or counterflow/plate wort chiller.
  • 【Package Include】:1* Stainless Diffusion stone + 1*Stainless tee fiting + 2*Hose barb Fitting.
Check Stock

XtremepowerUS 55148 Oxygen Acetylene Welder Tool Kit w/3 Nozzles Cutting Torch 15' Hose Gauge Regulators

  • Precision welding, cutting, brazing, soldering, hand facing and more! It'll cut up to 6" and weld or braze up to 1 / 2 " with appropriate tips.
  • Various kinds using oxygen and gas fuel for portable welding, rivet cutting, soldering, brazing, hard-facing and metal heating process.
  • A complete set includes a torch handle, oxygen regulator and acetylene regulator.
  • Deluxe single stage regulators with reverse flow check valves, brass torch handle and brass valve body for maximum strength and durability.
  • Welding kit includes multiple nozzles, hoses and fittings for all purpose welding, soldering, and other applications.
Check Stock

Oxygen Acetylene Torch Kit Oxy Gas Welding Cutting Brazing Set Portable Welder Tool Nozzles Regulator Hose Gauges Blue Case

  • ...liance. The workmanship is fine, does not scratch the palm, and is easy to grasp, improving the customer's experience of using it..
  • [15PCS TORCH KIT] The cutting torch kit features four nozzles (1 cutting tip & 3 welding tips), installed the tips you need, and the regulator easily adjusts the gas flow to make your equipment perform at its best.
  • The torch set includes a blue heavy-duty plastic blow molded carrying case for easy transport and storage..
  • [SIMPLE OPERATION] The oxygen acetylene regulator in the acetylene torch kit can help you adjust the PSI to the necessary position.
  • once you have ignited and adjusted to a neutral flame, move the torch tip slowly along the cut line until the metal is completely separated..
  • [USAGE SCENARIO] The torch set is ideal for a wide variety of applications such as construction sites, fabrication repair, automotive, general maintenance work, metal engraving, metal cutting, and more, ideal for the amateur metal worker or seasoned professional..
  • [PACKAGE INCLUDE] The oxygen acetylene torch kit includes1 x torch handle, 1 x cutting nozzle,3....
Check Stock

ABN Oxygen Acetylene Hose 1/4 Inch B Fittings Twin Welding Hose Oxy Acetylene Torch Hose Cutting Torch Hoses, 25 Foot

  • ...m) allows you to safely keep the tanks away from the torch tip while servicing your vehicle.
  • Oxy Acetylene torch kit gas hose features a 1/4-inch (6mm) inner diameter (ID) and 1/2-inch (13mm) outer diameter (OD) and has a maximum pressure of 300 PSI (20.7 Bar) to supply optimal flow rate.
  • FITS YOUR WELDING TORCH AND REGULATOR: Twin welding torch hose includes standard B fittings on both ends (4 threaded fittings total) to connect to your existing regulator or cutting torch kit.
  • Make sure that your regulator and oxy acetylene cutting torch handle are "B" size (9/16 inch - 18) air hose fittings to ensure exact fitment.
  • KEEP LINES DISTINGUISHABLE: Red and green twin hoses provide a color-coding system to hook up to your regulator and oxy torch kit safely.
  • One rubber hose includes right-handed fitting threads, and the other welder hose includes left-handed fitting threads.
  • Always wear protective welding helmets and welding gloves when working with welding equipment.
  • NO MORE CRACKS: Other welding torch kits often include low-quality plastic hoses that easily crack and leak to create a disastrous fire hazard with imminent failure to look forward to, but this welding equipment oxygen acetylene torch kit hose is constructed from acetylene rubber for maximum str....
Check Stock

Stark USA 55147 Oxygen Acetylene Welder Tool Kit w/4 Nozzles Cutting Torch 15' Hose Gauge Regulators

  • Precision welding, cutting, brazing, soldering, hand facing and more! It'll cut up to 6" and weld or braze up to 1/2" with appropriate tips.Perfect for an Amateur Metalworker or a Seasoned Professional.
  • Various kinds using oxygen and gas fuel for portable welding, rivet cutting, soldering, brazing, hard-facing and metal heating process.
  • Deluxe single stage regulators with reverse flow check valves, brass torch handle and brass valve body for maximum strength and durability. Precision torch handle with dual check valves, cutting attachment and cutting tip (size No. 0).
  • A complete set includes a torch handle, oxygen regulator and acetylene regulator.
  • Victor-style welding kit includes multiple nozzles, hoses and fittings for all purpose welding, soldering, and other applications.
Check Stock

Calibration Gas Devalving Tool for C10 cylinders

  • 20 PPM Hydrogen Sulfide, 60 PPM Carbon Monoxide, 1.45% Methane (58% LEL Pentane Simulant), 15% Oxygen, Balance Nitrogen - 29L.
  • Replaces part numbers: MSA 10048280, Gasco 34L-428-20, Portagas 70098036.
  • Regulator compatibility: 500 Series Preset Flow, Trigger Control Series, 6000 Series Multiflow, 8000 Series Demand Flow.
  • Manufactured under ISO:9002 quality standards by NorLab Specialty Gases with NIST traceability certification.
Check Stock

SÜA - Oxygen and Acetylene Regulators Welding Gas Gauges -Pair - Rear Entry - LDP series

  • PLEASE READ THIS INFORMATION CONCERNING THIS REGULATOR´S CONNECTORS***: Select any of the options of regulators.
  • Oxygen, Acetylene, or Propane and carefully check, read and make sure you understand the information shown in picture #2. Check all the Pictures with the Dimensions of the Connectors, and make sure that these Regulators fit your Tanks and your Hoses..
  • READ THIS***: Small Oxygen Regulator fits all American Oxygen Tanks with CGA-540 Valve, (It will NOT fit any disposable oxygen canisters) - Oxygen Delivery Gauge: 0-100 PSI.
  • READ THIS***: Small Acetylene Regulator fits ONLY Small Acetylene MC tanks with CGA-200 valve. (It will NOT fit larger acetylene tanks, it will NOT fit any propane tanks and it will NOT fit any disposable MAPP or Propane Canisters) - Acetylene Delivery Gauge: 0-30 PSI.
  • READ THIS***: Small Propane Regulator fits ONLY industrial or grill style Propane tanks with CGA-510 valve. (It will NOT fit small MC or B acetylene tanks, and it will NOT fit any disposable MAPP or Propane Canisters) - Propane Delivery Gauge: 0-30 PSI.
  • READ THIS****: The hose connectors on these regulators are Type B - 9/16" - 18 RH & LH. This regulator will NOT fit small hoses with small Type A - 3/8" connectors..
Check Stock

SÜA - Propane Regulator Welding Gas Gauges - CGA-510 - Rear Connector - LDB series - Check all the pictures and read the full description of this product to make sure it fits your tanks and hoses.

  • ***PLEASE READ THIS INFORMATION CONCERNING THIS REGULATOR´S CONNECTORS***: Select any of the options of regulators.
  • Oxygen, Acetylene, or Propane and carefully check, read and make sure you understand the information shown in picture #2. Check all the Pictures with the Dimensions of the Connectors, and make sure that these Regulators fit your Tanks and your Hoses..
  • ***READ THIS***: Small Oxygen Regulator fits all American Oxygen Tanks with CGA-540 Valve, (It will NOT fit any disposable oxygen canisters) - Oxygen Delivery Gauge: 0-100 PSI.
  • ***READ THIS***: Small Acetylene Regulator fits ONLY Small Acetylene MC tanks with CGA-200 valve. (It will NOT fit larger acetylene tanks, it will NOT fit any propane tanks and it will NOT fit any disposable MAPP or Propane Canisters) - Acetylene Delivery Gauge: 0-30 PSI.
  • ***READ THIS***: Small Propane Regulator fits ONLY industrial or grill style Propane tanks with CGA-510 valve. (It will NOT fit small MC or B acetylene tanks, and it will NOT fit any disposable MAPP or Propane Canisters) - Propane Delivery Gauge: 0-30 PSI.
  • ***READ THIS****: The hose connectors on these regulators are Type B - 9/16" - 18 RH & LH. This regulator will NOT fit small hoses with small Type A - 3/8" connectors..
Check Stock

SÜA - Propane Regulator Welding Gas Gauges - CGA-510 - Rear Connector - LDP series - Check all the pictures and read the full description of this product to make sure it fits your tanks and hoses.

  • ***PLEASE READ THIS INFORMATION CONCERNING THIS REGULATOR´S CONNECTORS***: Select any of the options of regulators.
  • Oxygen, Acetylene, or Propane and carefully check, read and make sure you understand the information shown in picture #2. Check all the Pictures with the Dimensions of the Connectors, and make sure that these Regulators fit your Tanks and your Hoses..
  • ***READ THIS***: Small Oxygen Regulator fits all American Oxygen Tanks with CGA-540 Valve, (It will NOT fit any disposable oxygen canisters) - Oxygen Delivery Gauge: 0-100 PSI.
  • ***READ THIS***: Small Acetylene Regulator fits ONLY Small Acetylene MC tanks with CGA-200 valve. (It will NOT fit larger acetylene tanks, it will NOT fit any propane tanks and it will NOT fit any disposable MAPP or Propane Canisters) - Acetylene Delivery Gauge: 0-30 PSI.
  • ***READ THIS***: Small Propane Regulator fits ONLY industrial or grill style Propane tanks with CGA-510 valve. (It will NOT fit small MC or B acetylene tanks, and it will NOT fit any disposable MAPP or Propane Canisters) - Propane Delivery Gauge: 0-30 PSI.
  • ***READ THIS****: The hose connectors on these regulators are Type B - 9/16" - 18 RH & LH. This regulator will NOT fit small hoses with small Type A - 3/8" connectors..
Check Stock

Airmax PondAir 2 Aeration Kit

  • Aerates ponds up to 1000 gallons, 2 ft deep.
  • Adds valuable oxygen and circulation, Single Diaphragm Compressor.
  • Extremely quiet operation, producing 0.15 CFM of airflow.
  • 2 round blue air stones, 2 check valves, 6 ft power cord.
  • Includes 2 rolls of 30 ft black vinyl tubing, air flow regulator.
Check Stock

SÜA - Oxygen and Acetylene Regulators Welding Gas Gauges Pair - Rear Entry - LDB series - Check all the pictures and read the full description of this product to make sure it fits your tanks and hoses

  • ***PLEASE READ THIS INFORMATION CONCERNING THIS REGULATOR´S CONNECTORS***: Select any of the options of regulators.
  • Oxygen, Acetylene, or Propane and carefully check, read and make sure you understand the information shown in picture #2. Check all the Pictures with the Dimensions of the Connectors, and make sure that these Regulators fit your Tanks and your Hoses..
  • ***READ THIS***: Small Oxygen Regulator fits all American Oxygen Tanks with CGA-540 Valve, (It will NOT fit any disposable oxygen canisters) - Oxygen Delivery Gauge: 0-100 PSI.
  • ***READ THIS***: Small Acetylene Regulator fits ONLY Small Acetylene MC tanks with CGA-200 valve. (It will NOT fit larger acetylene tanks, it will NOT fit any propane tanks and it will NOT fit any disposable MAPP or Propane Canisters) - Acetylene Delivery Gauge: 0-30 PSI.
  • ***READ THIS***: Small Propane Regulator fits ONLY industrial or grill style Propane tanks with CGA-510 valve. (It will NOT fit small MC or B acetylene tanks, and it will NOT fit any disposable MAPP or Propane Canisters) - Propane Delivery Gauge: 0-30 PSI.
  • **READ THIS**: The hose connectors on these regulators are Type B - 9/16" - 18 RH & LH. This regulator will NOT fit small hoses with small Type A - 3/8" connectors..
Check Stock