Reviews Overcurrent Detection

Belkin RockStar 10-Port USB Charging Station Power Strip (2.4 Amp per Port)

  • COMPACT AND CONVENIENT: The hub allows simultaneous, multiple device charging for up to 10 devices, all from 1 single AC outlet..
  • INTELLIGENT POWER DELIVERY: Automatic device detection allows the hub to deliver the precise amount of power (up to 2.4 Amps per port) to each port, regardless of the number and size of devices connected..
  • OVERCURRENT PROTECTION: The hub also provides multi-port overcurrent protection to safeguard connected devices from power spikes..
  • SPACE SAVER: External power supply allows the hub to fit easily onto a desktop, or can be wall-mounted to save space..
  • SAFE SOLUTION: Anti-slip bottom and no-fan design offers a safe, quiet charging solution..
  • WARRANTY: Protected by Belkin’s connected equipment warranty of up to $5000.00..
  • Powered by an external power supply of 120 watts..
Check Stock

UNI-T UT203+ Digital Clamp Meter 4000 Counts AC/DC Current Auto Range True RMS Multimeter

  • Large screen LCD display, fast ADC / analog to digital converter.
  • Full-featured false detection protection, overvoltage, overcurrent alarm prompt.
Check Stock

KATBO Automatic Battery Charger 6V 12V Auto-Voltage Detection， 2Amp 6 Amp Lead Acid Battery Float Charger Maintainer with LCD Display for Motorcycle Car Boat Marine Lawn Mower ATV Toy Car

  • Microprocessor-controlled - automatically adjusts the charge current and maintainability..
  • Provide 2A and 6A charging current matching battery and Float Charger Maintainer, charging safe and extended battery life..
  • LED digital display voltage and power, automatic voltage detection:detection for 6V or 12V battery..
  • To achieve the highest industry standard of energy efficiency..
  • Overcurrent protection, overvoltage protection, overheat protection, reverse protection, with self-stop function..
Check Stock

UMLIFE 3pcs ACS712 Hall Effect Current Sensor Module 30A Range ACS712 Module + 3pcs Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino Raspberry Pi

  • ❃❃ Package Included：3 x ACS712 Hall Effect Current Sensor Module + 3x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor.
  • ❃❃A wide range of applications:The current sensor ACS712 provides economical and accurate solutions for ac or dc sensing in industrial, commercial and communication systems. Typical applications include motor control, load detection and management, switching power supply and overcurrent fault protection..
  • ❃❃ACS712 Hall Effect Current Sensor Module：Chip: ACS712ELC-30A.
  • Pin 5V power supply, on-board power indicator.
  • ❃❃Voltage Sensor Module：Voltage input range: DC0-25V.
  • input : Terminal cathode connected to VCC, GND negative pole.
  • Output interface: "+" then 5/3.3V, "-" then GND, "s" then the for AD pins..
  • ❃❃Perfect Combination：Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
Check Stock

Slim DIN Rail Mount AC/DC Current Sensor Module, Based on ACS712. (+/-20Amp)

  • The item disign based on ACS712 IC. The item provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. Typical applications include motor control, load detection and management, switched-mode power supplies, and overcurrent fault protection..
  • Operating Voltage: Regulated 5VDC. Operating Current: 20mA(max). Load Maximum Current: +/-5Amp, +/-20Amp and +/-30Amp selectable. Load Frequency Bandwidth: DC ~ 80 kHz. Minimum Isolation Voltage: 2.1 kV(RMS). Output voltage proportional to AC or DC currents. LED indicator for power supply +5V. Pin jumper option for signal output capacitor..
Check Stock

NOYITO ACS758LCB-050B-PFF-T Linear Current Sensor Hall Current Module

  • ... The accurate, proportional output voltage is provided by a stable chopper-type, low-bias BiCMOS Hall IC that is factory-precisely programmed.003cbr003e.
  • The internal resistance of this conduction path is typically 100 μΩ with low power loss. The thickness of the copper wire allows the device to operate under high overcurrent conditions. The terminals of the conduction path are electrically isolated from the sensor pins (pins 1 to 3). In this way, the ACS758 sensor IC family can be used in applications that require electrical insulation without the use of opto-insulators or other expensive insulation techniques.003cbr003e.
  • Perform RC filtering on the output and use the op amp to build a voltage follower circuit to make the output more stable and better match the impedance of the A/D channel of the microcontroller. At the same time, two output pins are taken out (direct output and voltage follower output) for easy selection.003cbr003e.
Check Stock

20-Amp Lifepo4 Lithium AGM Gel Smart Battery Charger , 12V/20A 24V/10A Trickle Charger, Maintainer for car Boat Motorcycle, Lawn Mower

  • ... 【Temperature Detection & Multiple Protection】With built-in temperature sensor, it can be charged normally from -10°C (14°F) to 40°C (10°F). Built-in multiple detection, temperature protection, low voltage protection, overvoltage protection, short circuit protection, overcurrent protection, electrostatic spark protection. Allows you to recharge with complete peace of mind..
Check Stock

Anmbest Enhanced 4S 16.8V 40A 18650 Charger PCB BMS Protection Board Li-ion Lithium Battery Charger Lipo Cell Module for Drill Motor with Balancer

  • High-accuracy voltage detection circuit, fine workmanship and durable..
  • Highlight: Over-discharge protection, overcurrent protection, overcharge protection.
  • Conditions for Starting the Drill: To successful starting the drill requires three 15C-20C power batteries, or six 10C-15C power batteries (ordinary....
  • MOS transistor can control the battery charge and discharge, low standby current consumption..
  • Applications: Suitable for electric drill with starting current below 80A and power below 135W. Suitable for lithium batteries with nominal voltage of....
Check Stock

ANMBEST 3S 11.1V 12V 12.6V 40A 18650 Charger PCB BMS Protection Board Li-ion Lithium Battery Charger Lipo Cell Module for Drill Motor with Balance

  • High-accuracy voltage detection circuit, fine workmanship and durable..
  • Highlight: Over-discharge protection, overcurrent protection, overcharge protection.
  • Suitable for electric drill with starting current below 80A and power below 170W. With balanced charging function..
  • MOS transistor can control the battery charge and discharge, low standby current consumption..
  • Applications: Suitable for electric drill with starting current below 80A and power below 130W. Suitable for lithium batteries with nominal voltage of....
Check Stock

20 Amp Lithium Battery Charger, 12V and 24V Lifepo4,Lead-Acid(AGM/Gel/SLA.) Portable Car Battery Charger,Battery Maintainer, Trickle Charger, and Battery Desulfator for Car,Boat,Motorcycle…

  • ... ✅✅✅【Temperature Detection & Multiple Protection】With built-in temperature sensor, it can be charged normally from -10°C (14°F) to 40°C (10°F). Built-in multiple detection, temperature protection, low voltage protection, overvoltage protection, short circuit protection, overcurrent protection, electrostatic spark protection. Allows you to recharge with complete peace of mind..
Check Stock

Organizer 2pcs 4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board with Balance for Drill Motor 14.8V 16.8V Lipo Cell Module

  • Multiple Protections: Over-discharge protection, overcurrent protection, overcharge protection.
  • LOW STANDBY CURRENT: MOS transistor can control the battery charge and discharge, low standby current consumption..
  • Applications:It is suitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium....
  • 4S 40A 16.8V Li-ion Lithium Battery Protection Board PCB BMS Charger Protection Circuit Balance Charging Module for Drill Motor Motorcycle Battery.
Check Stock

2Pack Enhanced 4S 40A 16.8V Li-ion Lithium Battery Protection Board PCB BMS Charger Protection Circuit Balance Charging Module for Drill Motor Motorcycle Battery 4S 40A

  • Multiple Protections: Over-discharge protection, overcurrent protection, overcharge protection.
  • LOW STANDBY CURRENT: MOS transistor can control the battery charge and discharge, low standby current consumption..
  • Applications:It is suitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium....
  • If you want to start the drill successfully, it requires 3pcs15C-20C power batteries, or 6pcs10C-15C power batteries (Note: ordinary 18650 battery can....
Check Stock

Multi Port USB Charger Station,8-Port Desktop Multi USB Charger，USB Charging Hub with Smart Detect，Multiport USB Charging Station for Smartphone Tablets and Other Multiple Devices（White）…

  • ✉✉【Super function】：40W/8A 8 Port usb charger station,（Fastest 2.4A），Smart Detect Current requirements for each port connected to the....
  • ✉✉【Technology sense and practicality】: Multi usb charger station Intelligent detection , making you more at ease and adding fun to life，The....
  • ✉✉【Widely Compatibility】: USB charger multi port is compatible with Cell Phone , Tablets, Cameras, e-reader, USB fan, power bank, Bluetooth....
  • ✉✉【Multiple safety protection】: USB charger hub is made of flame-retardant PC shell, overheating, overcharging, overcurrent, overload, short....
  • ✉✉【What We Offer】: 1* Multiple USB Charger with 100~240V AC input, 1* 5 ft detachable power cord, GET 100% SATISFACTION or get....
Check Stock