Reviews Output Voltage Regulation

Songhe 150W DC-DC 10-32V to 12-35V Step Up Boost Converter Voltage Adjustable Module Laptop Voltage Charger Board Car Power Board 6A (5pcs)

  • Output power: natural cooling 100 w (MAX), strengthen heat 150 w (MAX) real power use time more actual situation, please Decide whether to add fans, please be sure to ensure heat sink temperature not to exceed 80 degrees..
  • DIY an output adjustable vehicle power supply, connect the 12V input, and output could be 14-35V(adjustable freely), However, the output voltage can not be less than the input voltage..
  • Car laptop power supply: connected to 12V power supply, output voltage regulation as your notebook need..
  • (1) continuous adjustable output voltage (12-35 v).
  • (2) fixed output (select) between 12-35 v, when buying, please tell the shopkeeper..
  • Input current: 16 a (MAX) (please strengthen heat, more than 10 a).
Check Stock

10000W SCR Digital Voltage Regulator,AC 220V 80A Electrical Motor Speed Controller Regulator, High Power Voltage Regulator Dimming Thermostat

  • 10000W resistance load limit power, room temperature for a long time is recommended to be used within 5000W, voltage regulation: AC 10V to 230V (adjust begin 20V), this is an easy-to-use voltage regulator that can control the brightness or speed of the light. Use a new bidirectional high-performance thyristor. The current can reach up to 100 A, and solves the problem of overcurrent caused by small resistance when the induction cooker cable is cooled..
  • 10000W SCR voltage regulator standard aluminum housing safe and durable super power electronic voltage regulator. It is widely used in resistive loads, such as heating wires, incandescent lamps and most (not all) single-phase AC motors..
  • 10000W speed controller operating voltage AC 110V-230V. Maximum power 10000W (resistive load), long term operating power 7000W. Voltage adjustable from AC 0V to near input voltage. Full copper 75A super large current terminal. The trigger circuit is unique, the control voltage is accurate and there is no hysteresis, the resistive load is turned off to 0, and after starting, it will be adjusted from 10V, adjust to the supply voltage that is closest to the input..
  • Connect the SCR voltage regulator to the front of the circuit of the electrical appliance. The ''input' and """"....
Check Stock

nobrand Unibell 5pcs Carb Carburetor Float Bowl Gasket Replacement Fit for 698781

  • ★Main functions: generator voltage regulation, overvoltage protection function, low speed protection function.
  • ★Voltage regulator, monitor the output voltage in real time and reduce or increase it accordingly..
  • ★High-efficiency semiconductors significantly improve work efficiency and performance..
  • ★Load regulation control, the regulator has a closed-loop control function, allowing you to adjust the load within the effective range..
  • ★If you encounter some problems during the purchase process, you can contact us by email at any time, we will solve it for you in the first time.
Check Stock

Adjustable Current LED Driver, DC 3.3V 3.7V 5V LED Driver 30-1500mA Constant Current Adjustable Module for LED 18650 Li-ion

  • This product is a current regulation integrated circuit operating from an input voltage of 2.8V to 6V, the constant output current can be set up to 1.5A with an external resistor..
  • It consists of high precision reference voltage, amplifier, current mirror, etc. The on-chip power transistor and current sense block greatly reduce the external component count, which makes this product ideal for LED driver..
  • When the CE pin is high, the input voltage is greater than 2.8V, and is larger than the LED forward voltage plus the required voltage drop, it functions normally to deliver constant current from the LED pin..
  • Adopts the temperature regulation instead of temperature protection function, the temperature regulation can make the LED being turned on continuously in case of high ambient temperature or high voltage drop. When the junction temperature reaches about 1.
  • With e chip enable function, which can shutdown the whole chip to limit the current consumption within 1uA. Adopts the over current protection block. When LED current approaches 1.9A(Typical), the over current protection block begins to function to prevent the LED current from increasing further..
Check Stock

Onyehn 2pcs LTC1871 DC-DC Boost Step-up Voltage Converter Module 100W High Power Adjustable Output 3.5-35V Power Regulator Board with LED Voltage Meter

  • No user/operator instructions or data sheets.Find the download data by yourself, please make sure you consider whether you know the operation before buying. Size: 68x42x14mm, LTC1871 IC with External MOSFET..
  • Conversion Efficiency: Up to 96%. Low input voltage or a large difference between input and output voltage will degrade the current capacity and efficiency..
  • Boost voltage to a stable regulated output. Useful for a wide range of applications, such as powering 5V USB devices from a 3.7V lithium cell, powering higher powered electronics from a 12V battery, and a wide range of automotive and electronic projects. Constant voltage regulation, not for raw LEDs..
  • Button to switch measurement of the input or output voltage, and LED indicates the current measurement of the input or output voltage.
  • The nixie tube can be turned off by another button. Mentioned states are able to be memorized, is not lost even if the power is disconnected. (On-board marked "IN" LED is turned on, the nixie tube display input voltage value, "OUT" LED bright display is the output voltage value)..
  • Output voltage must be greater than input voltage, do not apply reverse polarity voltage, voltmeter works only when input is >= 4V..
Check Stock

NOYITO AC to DC Precision Buck Power Supply Module AC 120V 100V-264V to 12V 2A 2000mA Isolated Step Down DC Module (12V 2A)

  • Isolated Precision Buck Power Supply Module ，Wide voltage range input with overload, short circuit, over temperature protection. Ultra-small size and high efficiency..
  • Input voltage range: AC 120V 100- 264V. Frequency range: 47-63Hz..
  • Output voltage: 12V ±1%. Output current: 2A 2000mA ..
  • Ripple: less than 60mVp-p. Output accuracy: +/-1%. Voltage regulation rate: +/-1%..
Check Stock

Tripp Lite LCR2400 Line Conditioner 2400W AVR Surge 120V 20A 60Hz 14 Outlet 12-Feet Cd

  • Advanced automatic voltage regulation corrects brownouts and overvoltages.
  • Powerful 1440-joule surge protection rating.
  • Rackmount cabinet fits standard 19-inch rack enclosures.
  • Premium automatic voltage regulation (AVR), power conditioning and AC surge suppression.
  • Maintains regulated 120V nominal output over an input range of 89 to 147V.
  • 2400 Watt, 20-Amp capacity with 14 NEMA 5-15R outlets and 12-foot AC cord.
Check Stock

Ronghang 12V 0.5A LED Transformer Replacement LED Controller Power Supply Adapter for 12V Plug LED String Light, Christmas Light (12V 6W), Black

  • ▶Input Voltage: AC 120V, 60Hz 0.2A, Output Voltage :DC12V, 0.50A, Rated Watts 6W. Output Voltage Accuracy Up to 100%, Voltage Regulation Up to 100%. Please check the current, voltage and connector of your equipment if it fits this power supply. .
  • ▶Raintight IP44 (not completely waterproof) it can be used for indoor and outdoor., need to mount the unit at a height greater than 1 foot from the ground surface. ▶Wide Application: The 12V 6W LED class 2 power supply fits for low voltage LED device, such as christmas trees light, string light, projector light, holiday lighting with output 12V 6W..
  • ▶Steady On Mode: This class 2 power only with steady on lighting mode, and it only work for steady on led light, if use it for flash lighting, it can’t work..
  • ▶Wide Application: The 12V 6W LED class 2 power supply fits for low voltage LED device, such as christmas trees light, string light, projector light, holiday lighting with output 12V 6W..
  • ▶Warm Tips Before order: Please check the output volt, currents, watts and connector if it fits for your device or not before your purchase, if the output volt, watts different with your original adapter, or the connector is different with your original adapter, don’t order it..
Check Stock

Weighing Sensor Transmitter Tension Sensor Transducer Weight Transmitter Amplifie Voltage Current Converter Sensor Amplifier Load Cell Amplifier Linear Differential Input Voltage

  • ▶ HIGH SENSITIVITY -- Features high precision, high sensitivity, high stability, and durable in use. Package List: 1 * Load Cell Transmitter.
  • ▶ PRECISELY AMPLIFY -- The internal high-performance device is used to precisely amplify the sensor output signal, internal voltage regulation, constant current bridge, voltage and current conversion, impedance matching, linear compensation, humidity compensation, etc..
  • ▶ CONVERT OUTPUT -- Convert the mechanics and quantity into standard current and voltage signal output, which can be switched from 0~5V/0~10V.
  • ▶ DIRECTLY CONNECTED -- It can be directly connected with the interface of the automatic control device PLC single-chip host computer terminal or computer.
  • ▶ MULTIPLE PROTECTIONS -- With standard signal external zero adjustment, external adjustment gain function, input overload protection, output short circuit protection.
Check Stock

12V9W LED Class 2 Power Supply IP44 Waterproof LED Adapter Driver Transformer Replacement for Christmas Tree String Light Projector Light Lawn Lamp Inflatable Device

  • 【Output Voltage】DC12V, 750mA, Rated Watts 9W. Output Voltage Accuracy Up to 100%, Voltage Regulation Up to 100%..
  • 【Input Voltage】 AC100V-240V, 50-60Hz 0.25A..
  • 【Steady On Mode】Note:12V9W power supply is only with steady on mode not flashing mode..
  • 【Waterproof IP44】 ETL listed for outdoor and indoor use..
  • 【Wide Application】This power adapter is designed for Low Voltage Device, suitable for some Christmas Trees, String Light, Projector Light, Lawn....
Check Stock

DC 0-10V 0/4-20mA Current Voltage Signal Generator, Built-in Battery Power Supply Interface Analog Simulator, Adjustable 4-Digit Display, for PLC, Panel Debugging, Device Testing

  • ...rt circuit protection, power supply with reverse connection protection, which is safe for you to use. User can set 9 x fast signal output points, more convenient to do debugging..
  • 【Wide Application】--- It can be used for PLC and panel debugging, device testing, frequency converter, flow valve, servo motors speed regulation, light dimmer and ect. With small size design, it is easy and convenient for you to carry it..
Check Stock

NOYITO DC 12V 2A Fan Power Adapter Fan External Power Supply Suitable for D-Port 3-Pin 4-Pin Male Female Connector Cooling Fans

  • Rated input voltage: AC 100 - 240V 50 / 60Hz..
  • Output cable length: 1.25 meters (About 4.0 ft)..
  • Output plug style: D type，Suitable for 3-Pin 4-Pin Male Female Connector Cooling fans (Red positive.
  • Wide range of adaptation. Input, output with overvoltage protection, Short circuit protection , constant current constant voltage..
  • 【Important Note】Do not overload use it . This fan external power supply does not have the function of speed regulation..
Check Stock

EDECOA 3500 Watts Pure Sine Wave Power Inverter DC 12V to 120V 110V AC with LCD AC Terminal Block with LCD Display and Remote Controller

  • INFO: This is a 12V 3500W pure sine wave inverter. It is ideally suitable for Journeys, Camping, Tents, Boat Trip, Working on the way and everywhere, where is no electricity! Simply connect the Power Inverter with a Battery and then connect to electrical appliances..
  • POWER: Output Continuous Power: 3500 Watts.
  • EQUIPMENT: 4 AC outlets (US sockets) and 1 hardwire terminal, remote and LCD display ( You can see: 1.Battery pattern 2.Battery voltage 3.Battery power 4.Voltage display: Inverter output voltage 5.The pattern display and flash when the inverter is in protection mode.).
  • MULTI-PROTECTION: Automatic voltage regulation(AVR).
  • WHAT YOU GET: EDECOA 3500W pure sine wave power inverter, battery cables, remote switch and user manual..
Check Stock