Reviews Output Voltage Range

ACEIRMC 3pcs 20A 300W CC CV Step Down Module Adjustable DC 6-40V to 1.2-36V Voltage Regulator Buck Converter Constant Current Power Supply Module

  • Aceirmc buck converter input voltage range is DC 6-40V, adjustable output voltage range is DC 1.2-36V, can be used to convert 24v to 12v 5v, adjustable output current range is 0-20A, max output power is 300W. The step down regulator can apply to constant output current..
  • With a wide input voltage range from 6V to 40V, the step-down converter can accurately adjust output voltage and current. The efficiency can be up to 95%,(measured at 20A, converting 24V to 12V)..
  • Short Circuit Protection: Self-recovery(cannot short circuit for long time). Plus, when input and output is common grounded, no-load CV output constant voltage,CC output constant current.
  • Adopting 75V / 80A large current dual MOS tube designed step-down board, Input and output use high frequency low resistance electrolytic capacitor, low ripple, and gives a stable output. Large current 30A connection screw terminals, more convenient to install.
  • Application: DIY stabilized voltage supply, LED car display, mobile power, industrial equipment appliances, LED driver, monitor, solar energy, fans, photovoltaic energy, motor, etc....
Check Stock

DEVMO DP20V2A Constant Voltage Constant Current Programmable Control Step-Down Supply Power Module

  • The constant voltage and constant current programmable control power supply module is cabinet and delicate, and it put the collection of analog integration and digital control functions in one..
  • Its adjustable output voltage range is 0-20.0V, step by 0.1V. Its adjustable output current range is 0-2.00A, step by 0.01A..
  • The constant voltage and constant current programmable control power supply module is cabinet and delicate, and it put the collection of analog integration and digital control functions in one. Its adjustable output voltage range is 0-20.0V, step by 0.1V. Its adjustable output current range is 0-2.00A, step by 0.01A. Boot voltages can be stored freely and the model has two groups of quick storage voltage. Compared with the traditional analog power supply, it is more convenient to quickly extrac.
  • Adjusting preset voltage:Pressing SET button, page down to U-SET, press the codding potentiometer, then enter toadjustnumeric value. Press codding potentiometer in turn to choose the numeric value you want to adjust. Turn codding potentiometer to adjust the numeric value. If you want toexit adjusting voltage, press shortly SET. In the process of adjusting preset voltage, if you open output voltage mode by pressing the ON/OFF, the output voltage wi....
Check Stock

DC Buck Converter, DROK DC to DC Step Down Power Supply Module 10V-65V to 0-60V 0-12A Adjustable Voltage Regulator Transformer Board with LED Display for Volt Reducer

  • 【Adjustable Output Voltage and Current】For DROK buck converter: Input voltage range is DC 10-65V.
  • Output voltage range is DC 0-60V, can be arbitrary adjustable and used to convert 24v to 12v 5v.
  • Output current range is 0-12A, can be arbitrary adjustable.
  • 【LED Display】This power supply module is designed with LED display, which can show real-time voltage, current, capacity and time..
  • 【Constant Current and Voltage with Indicator Lights】This volt transformer board can set constant output voltage and constant output current by the key buttons. Also, the module is equipped with working status indicator lights, which are output OUT, constant voltage CV and constant current CC respectively, so that the working status can be checked in real time..
  • 【Auto Output and Button Lock Mode】Automatic output can be set after power on. And The parameter adjustment button can be locked to prevent misoperation to adjust the output voltage and current parameters..
  • 【Cooling fan and cooling pad】This adjustable power supply converter is equipped with cooling fa....
Check Stock

Buck Converter 24v to 5v, DROK DC 4-32V to 1.25-30V 3A Adjustable Step Down Module, LM2596 Voltage Regulator Board, 12V to 5 V LED Power Supply Transformer

  • PARAMETER — input voltage range DC 4V-32V.
  • DISPLAY — LED displays output voltage, output current and input voltage (switched by MODE button)..
  • ADJUSTABLE OUTPUT — output voltage can be adjusted by screw..
  • ON/OFF SWITCHABLE OUTPUT — output voltage can be turned on/off by button.
  • when the output is off, the screen will display OFF..
  • PROTECTION — input reverse connection protection.
Check Stock

Victron Energy Orion-Tr Smart 12/24-Volt 15 amp 360-Watt DC-DC Charger, Isolated (Bluetooth)

  • Input voltage range: 10-17V --- Output voltage adjust range: 20-30V --- Cont. output current at nominal output voltage and 40°C: 15A --- Maximum output current (10 s) at nominal output voltage minus 20%: 25A.
Check Stock

Victron Energy DC-DC Bluetooth Charger Orion-Tr ORI 122436120 Smart 12/12-30A (360W) Isolated B2B Booster

  • Input voltage range: 10-17V --- Output voltage adjust range: 10-15V --- Cont. output current at nominal output voltage and 40°C: 30A --- Maximum output current (10 s) at nominal output voltage minus 20%: 40A.
Check Stock

Voltage Measurement Module, DVB01 Voltage Comparator for Voltage Measurement for Control Applications

  • The LM2903P devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
  • Single-supply or dual supplies Wide range of supply voltage Maximum rating: 2 V to 36 V.
  • Low supply-current independent of supply voltage: 200 µA per comparator, Output compatible with TTL, MOS, and CMOS.
  • Common-mode input voltage range Includes Ground, Low output saturation voltage.
  • Differential input voltage range equal to maximum-rated supply voltage: ±36 V.
Check Stock

DCDC Converter, DROK Step Down Voltage Regulator Module DC 4.5-40V 36V 24V to 1.25-37V 12V 9V 5V 3V Variable Buck Converter Adjustable Electronic Power Supply Volt Reduce Transformer Stabilizer Board

  • DROK DCDC converter input voltage range is DC 4.5-40v, output voltage range is DC 1.25-37v, the voltage is continuously adjustable. It is a non-isolated buck converter, can dial down voltage from 36v 30v 24v to 12v 5v 3.7v 3.5v 3.3v 2v..
  • Analog Control: Our DC buck converter is designed with a adjustable potentiometer, the output voltage can be easily and accurately adjusted with a mini screwdriver. Clockwise to step up voltage and counterclockwise to step down voltage..
  • Protection: This power supply supply step down regulator is with over-temperature and short-circuit protection, which protect your device from damaging and enhance its safety when using..
  • Low Power-consumption: Although the voltage range is wide, this buck voltage module has a low power consumption of only about 3A when in static state..
  • Note: Please make sure the input voltage is at least 1.5V greater than output voltage to ensure stable output.
  • please note that there is no reversed connection protection, so check the polarity of input voltage before power on to avoid burning due to reversed connection.
  • please add heatsink when the output power is larger than 15W..
Check Stock

Songhe LM2596S LM2596 with LED Display Voltmeter Buck Converter DC-DC 4.0-40V to 1.25-37V 2A Voltage Adjustable Board Step Down Module Power Supply Module 5pcs

  • This module can be applied to fields in the input voltage is higher than the step-down output voltage, such as batteries, power transformers, DIY....
  • With a voltage meter and voltmeter displays self-calibration. Uses a more advanced microprocessor voltage voltmeter error ± 0.05V, Range 0 ~ 40V. (To....
  • Touch of a button to switch the input or output voltage measurements and has a light show which is being measured voltages, and save the settings,....
  • Input Voltage 4.5~ 40V. (Input voltage must be higher than the output voltage of 1.5v or more).
  • Adjustable output voltage range of 1.25V ~ 37V continuously adjustable. (Input voltage must be higher than the output voltage of 1.5V).
Check Stock

Juried Engineering LM2903P LM2903 Dual Differential Comparator Automotive Grade Breadboard-Friendly IC DIP-8 (1 Piece)

  • The LM2903P devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
  • Single-supply or dual supplies Wide range of supply voltage Maximum rating: 2 V to 36 V.
  • Low supply-current independent of supply voltage: 200 µA per comparator, Output compatible with TTL, MOS, and CMOS.
  • Common-mode input voltage range Includes Ground, Low output saturation voltage.
  • Differential input voltage range equal to maximum-rated supply voltage: ±36 V.
Check Stock

SMKAN DP20V2A Constant Voltage Constant Current Programmable Control Step-down Supply Power Module

  • The constant voltage and constant current programmable control power supply module is cabinet and delicate, and it put the collection of analog integration and digital control functions in one. Its adjustable output voltage range is 0-20.0V, step by 0.1V. Its adjustable output current range is 0-2.00A, step by 0.01A. Boot voltages can be stored freely and the model has two groups of quick storage voltage. Compared with the traditional analog power supply, it is more convenient to quickly extract the voltage or current required. LCD display on the model has the function digital voltmeter and ammeter. You can view the preset voltage, input voltage, output voltage, the preset current, output current, output power and LCD brightness..
  • Adjusting preset voltage:Pressing SET button, page down to U-SET, press the codding potentiometer, then enter toadjustnumeric value. Press codding potentiometer in turn to choose the numeric value you want to adjust. Turn codding potentiometer to adjust the numeric value. If you want toexit adjusting voltage, press shortly SET. In the process of adjusting preset voltage, if you open output voltage mode by pressing the ON/OFF, the output voltage will be refreshing by increasing or decreasing the numeric value.
Check Stock

Comparator Dual177;18V/36V 8-Pin SO N T/R

  • Wide range of supply voltage Maximum rating: 2 V to 36 V, Low input bias current, Low output saturation voltage.
  • Low supply-current independent of supply voltage: 200 µA per comparator, Low input offset voltage.
  • Common-mode input voltage range Includes Ground, Output compatible with TTL, MOS, and CMOS.
  • Differential input voltage range equal to maximum-rated supply voltage: ±36 V, Example Applications: Vacuum robot, Single phase UPS, Server PSU, Cordless power tool, Wireless Infrastructure, Appliances, Building Automation, Factory automation & control, Motor drives, Infotainment & cluster.
Check Stock

D-PLANET [8-Pack] LM2596 DC-DC Adjustable Buck Converter 3-40 V to 1.5-35v Step Down Power Supply High Efficiency Voltage Regulator Module …

  • Input voltage range： DC 3 -40 V (input voltage must be 1.5 V higher than the output voltage, no boost).
  • Output voltage range：Output: DC 1.5 - 35 V voltage is continuously adjustable, maximum output current is 3 A.
  • 8 pieces of LM2596 board and heat sinks included.
  • Easy to make it work and convenient to accurately adjust the output voltage with a mini screwdriver..
  • 100% SATISFICATION SERVICE: If there are any problem with our products, please feel free to contact us. you can request a refund for any single module....
Check Stock