Reviews Output Module

Power Supply, DPS3005 /DPS5005 Communication Version Bucks Power Supply Step-Down Voltage Converter(DPS3005-USB-BT)

  • ...005 have same functions, only the technical parameters are different,for example, voltage, current ,etc.
  • This module has power-down stored function and can store 10 groups preset value.And it also has the function of extracting quickly two groups stored value. Though this module has reverse connection protection and output short circuit protection, you can muse be in strict accordance with connection description to connect. If you connect the supply power with output, the module will be burnt.
  • Compared with the traditional analog power supply, it is more convenient to quickly extract the voltage or current required. This module has many advantages, small size, advanced function, good visual effect, high operability, high-precision, being used independently, being inset into the device and been widely applied.
  • LCD display on the module has the function digital voltmeter and ammeter.You can view the preset voltage, input voltage, output voltage, the preset current, output current, output power, etc.
  • On the setting data interface, you can adjust over-voltage value, over-current value, over-power value, data set and LCD brightness. On the output state remind area, you can see that output opens or not, the state of constant voltage and constant current, outpu....
Check Stock

Adafruit 1918 Analog UV Light Sensor Breakout - GUVA-S12SD

  • photosensitive resistance module's most sensitive to ambient light, commonly used to detect environment around the brightness of the light, or MCU trigger relay module, etc..
  • module in the environment light intensity than set threshold, output high level DO end, when the environment light intensity more than set threshold, the DO output low level.
  • the DO output can be directly connected to microcontroller, through single chip microcomputer to detect the high and low level, thus to detect the environment light intensity change.
  • the DO output can be directly driven our relay module, which can form a light-operated switch..
Check Stock

EC Buying AD620 High Accuracy Low Power Programmable Instrumentation Amplifier Module Voltage Amplifier Module Differential Amplifier Single-Ended/Differential Small Signal/Small Amplifiers Module

  • ...l for portable (or remote) applications. With high accuracy, low offset voltage, and low offset drift, the AD620 is ideal for precision data acquisition systems such as electronic scales and sensor interfaces. Also features low noise, low input bias current, and low power consumption. The module has a fixed voltage output..
  • ♥Basic Features: ✭Module Name AD620 Instrument Programmable Amplifier ✭Module size:50mm * 50mm ✭Module power supply: 5V-24V ✭Module input signal type: single-ended signal or differential signal ✭Module signal input and output range: the input signal range is within 100 microvolts of the power supply, and the output signal range is within the power supply ✭Module bandwidth: AD620: 120KHz (G=100), AD623: 800KHz (G=1), AD620/623 is lower than 50KHz at high gain, and higher than 1MHz at low gain.
  • ♥ Other Features: ✭Module gain: When there is no solder slip, the AD620 will zoom by 10 times by default, and the AD623 will zoom by 20 times by default. During welding slip, AD620: G=1+50K/Rg, AD623: G=1+100K/Rg ✭Maximum magnification of the module: more than 2000 times (actual measurement), due to the large gain of the waveform frequency band, it is recommended to use multi-stage amplification with high gain ✭Fixed outpu....
Check Stock

Lights88 532nm Green Laser Module Diode Laser Beam Driver(5mw Green Dot Laser Module)

  • 100mW Module: This is a 100mW module that can emit a 405nm blue-violet ..
  • Adjustable focus design: dot diode module adopts adjustable focus design.In other words, the spot size of this dot diode module is adjustable..
  • High Reliability Material: This dot diode module is made of durable copper shell for long life..
  • Continuous output: This dot diode module supports continuous output and can be used for a long time..
  • Application: This dot diode module is designed for engraving machine, cutter and so on..
Check Stock

FINDER 90.26 Relay Socket, 250V, 10A, DIN Rail

  • Output can be directly connected to microcontroller, through single chip microcomputer to detect the high and low level, thus to detect whether there is a vibration environment, call the police..
  • This module is compared with the normally open type vibration sensor module, vibration trigger for longer periods of time, can drive the relay module..
  • Product vibration, the vibration switch instantaneous disconnection, output the output high level, the green light is not bright.
  • Product no vibration, vibration switch is closed on state, the output terminal output low level, the green light is lit.
  • Used to trigger the effect of various vibration, theft alarm, intelligent car, earthquake alarm, motorcycle alarm, etc.
Check Stock

DC 3-5V 405nm 100mW Mini Dot Diode Module Head Adjustable Focus Blue Violet Diode Module Micro Tube

  • 100mW Module: This is a 100mW module that can emit a 405nm blue-violet ..
  • Adjustable focus design: dot diode module adopts adjustable focus design.In other words, the spot size of this dot diode module is adjustable..
  • High Reliability Material: This dot diode module is made of durable copper shell for long life..
  • Continuous output: This dot diode module supports continuous output and can be used for a long time..
  • Application: This dot diode module is designed for engraving machine, cutter and so on..
Check Stock

ICC/Intervox MEO-627PN-02-643, Condenser Microphone 6.0 X 2.7

  • DEPENDABLE TO USE: The Mic sensor sound module is professional manufacturing, voice detection module has high performance, strong reliability, making sure safety use..
  • MAIN FUNCTION: This microphone sound detection module can detect sound strength of the environment, with high accuracy, great for professional usage..
  • ANALOG OUTPUT: The microphone sensor sound module supports analog voltage signal output, the signal amplitude is VCC/2, stable to use..
  • ADJUSATBLE GAIN: The mic sensor voice module has high sensitivity, built in amplifier circuit, and the gain can be adjusted as needed..
  • AD COVERSION: The microphone voice detection module can obtain the voltage signal of sound intensity through AD conversion..
Check Stock

1024 P/R 5VDC 10mm Diameter Hollow Shaft Incremental Rotary Encoder

  • This is the "momentary" variety of the touch sensor - touch and it turns on, release and it turns off..
  • Positive and negative can be used as a touch surface,can replace the traditional touch button..
  • Four M2 screws positioning holes for easy installation.Module can be installed in such as surface plastic, glass of non-metallic materials..
  • In addition to the thin paper ( non-metallic ) covering the surface of the module , as long as the correct location of the touch , you can make hidden in the walls, desktops and other parts of buttons..
  • The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the module output low, low power consumption.
  • When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode..
Check Stock

10 Pieces DC-DC Boost Converter 2A Adjustable Module Voltage Regulator Board Input Voltage 2 Volt-24 Volt to 5 Volt-28 Volt Output Voltage (Without USB Connector)

  • Product size: 36 x 17 x 14 mm/ 1.42 x 0.67 x 0.55 inch (L x W x H).
  • Method of use: the module of the IN+ and - after 2-24V, IN adjusting the potentiometer can adjust output voltage, output voltage is greater than the input voltage.
  • Matters needing attention: 1. The input voltage should not exceed the maximum input voltage.
  • 2. The peak current output current is no more than TV university.
  • Package included: 10 x DC-DC power apply module booster power module, max output is 28Volt.
Check Stock

Analog Voltage to PWM Signal Converter, 0-5V/0-10V Analog Input Voltage to 0-100% PWM Signal 2KHZ-20KHZ Converter Module,for PWM Motor Speed Control Interface Circuit Activity

  • Voltage to PWM Signal Converter Module: This module can convert 0-5V or 0-10V analog input voltage into 0-100% PWM signal..
  • Wide Application: This module is widely used for PWM motor speed control interface circuit, instrumentation AD interface conversion, and other applications that need convert voltage to PWM signal..
  • PWM Signal Frequency Range: The PWM signal frequency range is 2KHZ-20KHZ, maximum is 20KHZ, default minimum is 2KHZ,Hyuduo is committed to providing customers with high-quality products and thoughtful service..
  • Setable Output Frequency: The default function of this module is converting 0-10V into 0-100% 2KHZ PWM signal, but the output frequency can be set by adjusting potentiometer as needed,stable and reliable performance, practical, easy to operate and use, has a long service life..
  • Two Kinds of PWM Signal: There are two kinds of PWM signal, PNP-PWM output and NPN-PWM output. The PNP-PWM output is only 5V level, NPN-PWM output is 5V and 24V level,If you have any problem,please contact us, we will strive to provide you with satisfactory service!.
Check Stock

Juried Engineering Microchip MCP602-I/P MCP602 Dual Operational Amplifier Op-Amp 2.8MHZ 2.3V/us DIP-8 Breadboard-Friendly (Pack of 1)

  • DROK micro voltage converter with low voltage input range DC 4.8-35V, positive and negative dual output voltage is ±15V, rated output current is 660mA..
  • APPLICATION: the step-up regulator module is suitable for sensor, operational amplifier, audio and other devices that needs positive-negative power output..
  • SMALL MODULE HIGH EFFICIENCY: DROK boost converter is with small dimension 64x27.5x12.5mm.
  • the small module conversion rate can be up to 88%..
  • TWO MOUNT METHODS: the volt transformer module not only support row pin welding, but also lead mounting, which will be convenient for your use..
  • NOTE: please note that although the module is with short circuit protective function, it can not in long continuous short circuit, or it will be damaged..
Check Stock

SIEMENS 6ES7 214-1AG40-0xB0 SIMATIC S7-1200 CPU 1214C, Compact CPU

  • Programmable Control -- This module is programmable control, can achieve thousands of functions, stable and reliable working performance, built-in watchdog timer circuit, to ensure that the module for a long time to run Input high speed pulse C235, C251 and FX1N compatible.Output relay 1A output, Rated current 5A, can directly drive DC solenoid valve, AC solenoid valve, AC contactor, AC motor, etc..
  • Built-in Analog Input and Output -- Built-in Analog input AD, corresponding to internal data register D5030.(Not D8030) Built-in Analog output DA, corresponding to internal data register D5101..
  • The PLC with Two Programming Port -- The TTL interface and the 232 interface. The 232 interface, you can directly use the USB-232 serial port with a computer to download the program directly. When the PLC need to connect with the touch screen or text, can be used to conne....
Check Stock

AEDIKO 10pcs 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 18650 Lithium Battery Charging Boost Mobile Power Protection PCB Board

  • 2A 5V Lithium Battery Charging Protection Module:Output Voltage: 5V.
  • Charging Voltage: DC 4.5V-5.5V (DC 5V Recommended).
  • MCU Users: if You Accept a Small Load KEY Can be Connected to the Microcontroller about 20s to Provide a Low Level Allows the Module to Continue Working. Trigger Mode: Low Level Trigger (Ground).
  • Protection Functions: 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module.Lithium Battery Protection Function:Over-Current Protection,Over-Voltage Protection, Over-Temperature Protection, Short Circuit Protection.
  • NOTE:The First Time the Load is Connected, Output is Automatically Turned On. If the Load is Less than 50MA, the Output will be Automatically Turned Off after 30s.
  • if the Load is Greater than 50MA, the Output Will be Automatically Turned On.
  • Application:2A 5V Module Widely Used for Mobile Power, Car Charging Retrofit,Driving Recorder Power Supply and Portable Devices Such As Mobile Phones and Tablets.
Check Stock