Reviews Outer Installed Mixing Valve

Cash Acme 3/8 Inch HG145 Thermostatic Mixing Valve with Compression Connections Tee Elbow and Integral Checks Brass Plumbing Fitting 24525

  • CASH ACME THERMOSTATIC MIXING VALVE: This Thermostatic Mixing Valve is a point-of-use thermostatic mixing valve designed to assist in the prevention of scalding.
  • this valve reduces the outlet flow to a trickle in the event of cold water supply failure.
  • COMPATIBILITY: This mixing valve is compatible with SharkBite copper tubing, CTS, CPVC, SDR-9 HDPE, and PEX fittings.
  • DURABLE AND HIGH QUALITY: Mixing valves are composed of durable lead-free brass for long-lasting reliability.
  • EASY TO INSTALL: The innovative design of this thermostatic mixing valve allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • remove using a disconnect clip or disconnect tongs.
  • SPECS: Outlet temperature range is factory set at 120 degrees F and adjustable anywhere from 85 degrees to 130 degrees F to prevent scalding water temperatures.
Check Stock

Speed Queen White Laundry Pair with TR7000WN 26 Top Load Washer and DR7000WG 27 Gas Dryer

  • The Alliance 202395P Fill Mixing Valve is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications.
  • Replacement Alliance Commercial Washer Fill Mixing Valve is a 4.4 GPM (Gallons Per Minute) Mixing Valve that operates on 120V.
  • Alliance 202395P Commercial Washer Fill Mixing Valve replaces the following part numbers: 202395.
  • High quality Alliance OEM 202395P Commercial Washer Fill Mixing Valve is compatible with the following brands: Speed Queen.
  • Alliance Laundry Systems Genuine Parts are engineered and tested for leading performance.
Check Stock

Cash Acme 3/8 Inch HG135 Thermostatic Mixing Valve with Compression Connections and Integral Checks Brass Plumbing Fitting 25686

  • CASH ACME THERMOSTATIC MIXING VALVE: This Cash Acme Thermostatic Mixing Valve is a sleek and compact under-sink temperature mixing valve designed to help prevent scalding.
  • COMPATIBILITY: This mixing valve is compatible with SharkBite copper tubing, CTS, CPVC, SDR-9 HDPE, and PEX fittings.
  • DURABLE AND HIGH QUALITY: Mixing valves are composed of durable lead-free brass for long-lasting reliability.
  • EASY TO INSTALL: The innovative design of this thermostatic mixing valve allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • remove using a disconnect clip or disconnect tongs.
  • SPECS: Outlet temperature range is factory set at 120 degrees F and adjustable anywhere from 85 degrees to 130 degrees F to prevent scalding water temperatures.
Check Stock

Rectorseal 86662 NG-R22 Novent R22 Cap 2 Pack, Green

  • When installed, the outer casing will rotate around the thread insert, not allowing cap to be removed. An integral torque limiter prevents over tightening.
  • Novent locking caps have an inner thread insert made of precision machined solid brass.
  • Outer shell is made of a protective corrosion resistant anodized aluminum shroud.
  • Integral neoprene O-ring resists oils and sealants.
  • Embossed ID labeling prevents refrigerant gas mixing.
Check Stock

Autolite 1100 1 Barrel Carburetor Fits 1963 to 1968 Mustang Falcon Comet straight six cylinder 170 & 200 CID engines hot air choke works with automatic and manual transmissions

  • ...ng installation and use, please contact the seller via Amazon email. We will provide you with a satisfactory after-sales treatment plan, including returns, exchanges and free accessories. Similarly, we have Professional mechanics will provide you with suggestions on how to deal with some problems..
  • The carburetor is installed on the 64 Mustang engine for testing. After you order it, you need to fine-tune the carburetor idle screw and air mixing screw..The carburetor has 2 idle screws and 1 air mixing screw.Carburetor Be applicable to 1964-1968 ford 170/200 straight 6 cyl engines.
  • This carburetor is simple in structure and easy to install.After installing the carburetor, if the fuel mixture is too rich and the exhaust pipe emits black smoke, it is necessary to adjust the idle mixing screw to reduce the fuel injection..
  • Before purchase, please check carefully whether the carburetor you need to replace is the same as this product. If necessary, please ask us or local professional auto repair personnel.This product does not include air filters and copper fittings.Fuel Filter 1/8"-27 NPT This size fits our carburetor.
  • We use an improved high-quality needle valve to improve the performance of the carburetor.Mounting aperture 10.5mm 2 hole spacing 68mm,Please c....
Check Stock

Two Wheel Scooters, Kiddy Cars

  • ...L/V2/XR Cecotec Bongo A Series and other 8.5-inch electric scooters..
  • 【Easy Installation】 Scooter inner tubes are equipped with a tyre lever, convenient for customers to install. Note: Put the inner tube into the outer tire and then inflate it, otherwise it will not be installed.If there are any questions, pls feel free to let us know,and we will get back to you within 24 hours..
Check Stock

INTBUYING Dry Powder Mixer 100L Particle Blender Powder Mixing Machine Granual Mixer 110V 26.5Gal

  • 【Wide Application】The dry powder mainly used for mixing and stirring various powdery, granular, flake, lump and viscous materials in feed, chemical, metallurgical, food and other industries..
  • 【Well Mixed】The barrel and the inner mixing blade can rotate at the same time, and the rotation direction is opposite to achieve the purpose of more uniform mixing. The barrel can be turned over 360 degrees, and there is no dead corner when mixing..
  • 【Controllable Speed】The butterfly valve type discharge port is convenient for discharging and can control the speed of discharging. The butterfly valve rubber gasket has good sealing effect and does not leak..
  • 【Durable and Stable】Thickened stainless steel cylinder, anti-corrosion, long service life.
  • high-quality copper core motor, strong power, stable and durable..
  • Voltage:110V,2.2kw.Double chain design with thicker chain and sprocket.Size: 110CM*80CM*102CM(43.3”*31.5”*40.1”)..
Check Stock

Valve Spring Shim Kit - 1.300\ OD.520\ ID .030\ Thickness

  • Must-Have for Your Next Engine Build or Spring Upgrade - Production tolerances in cylinder heads, valve lengths, valve springs, retainers and locks can impact the valve spring installed height from valve to valve, greatly impacting spring seat and open pressures. COMP Cams spring shims are a must-have to ensure precise installed height on intake and exhaust valves..
  • Precision - COMP Cams shims are crafted from the finest shim stock steel to precise dimensions, ensuring consistent installed height adjustments from the first valve to the last..
  • Race Tough - COMP Cams valve spring shims are not only made from the highest quality shim stock available, they are also heat treated to withstand the most radical camshaft profiles..
  • 1. 300" Outside Diameter, 0. 520" Inside Diameter. Includes 16 0. 030" Thick Shims..
  • Recommended for use with ~ 1. 300" Outside Diameter or smaller like our 26915 Beehive and 7228 Conical Spring..
Check Stock

Eastwood Durable Y Connector Manifold for Dual Blaster Mixing Valve

  • 3/8 Inch I.D. Mixing Valve For The Dual Blaster.
  • Use Teflon Thread Sealing Tape On All Threaded Connections.
Check Stock

RBROHANT Brushed Nickel Thermostatic Shower System, 20x11 Inch Rectangular Dual-function Rainfall Shower Head with Handheld Sprayer, Wall Mounted, Solid Brass, Rough-in Valve Body and Trim Included

  • ...2’’ NPT Connection: The connectors are standard NPT 1/2’’ tapered threads, compatible with most existing shower systems. Embedded box and all hardwares and parts are included makes the installation easier..
  • Warm Reminder: Please pay attention that the knob is in the ebmbedded box of the rough-in valve, it is installed onto the valve already, there is no part missing, please kindly contact us for help if any problem..
Check Stock

Valve Spring Shim - 1.500\ OD.645\ ID .060\ Thickness

  • Must-Have for Your Next Engine Build or Spring Upgrade - Production tolerances in cylinder heads, valve lengths, valve springs, retainers and locks can impact the valve spring installed height from valve to valve, greatly impacting spring seat and open pressures. COMP Cams spring shims are a must-have to ensure precise installed height on intake and exhaust valves..
  • Guaranteed Precision - COMP Cams shims are crafted from the finest shim stock steel to precise dimensions, ensuring consistent installed height adjustments from the first valve to the last..
  • Race Tough - COMP Cams valve spring shims are not only made from the highest quality shim stock available, they are also heat treated to withstand the most radical camshaft profiles..
  • 1.500" Outside Diameter, 0.645" Inside Diameter. Includes 1 0.060" Thick Shim..
  • Recommended for use with our 916, 26056, 917, 928, 929, 924, 925, 911, 954, 936, 938, 930, 953, 999, 26094, 943, 26055, 939, 927, 919, 933, 935, 944, 26095, 26097, 932, 26089,955, 26115, 26099 and 26547 springs..
  • Available in an assortment pack under part number 4757..
Check Stock

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

  • ...rature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
  • This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
  • This has the outlet facing the front. Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. These bolts and spacers are NOT included, but may be purchased at your local hardware store. Common bolt sizes: Two - 5/16" 18 x 2 1/2", One - 5/16" 18 x 3 1/2".
Check Stock

Eastwood 1/2 in. Ball Valve For Dual Blaster For Mixing Valve Assembly

  • Replaces Ball Valve For Mixing Valve Assembly On Dual Blaster.
  • Inline Valve For Connecting Two Pipes Going In The Same Direction With Double-Seal System.
  • Heavy Duty Stainless Handles To Increase Service Life, Fast Turn Open Or Closed Operation.
Check Stock