Reviews Outboard Gear Puller

Upper & Lower Bearing Carrier Puller with Fuel Water Separator Wrench for Yamaha, for Johnson, for Evinrude, for Mercury, for Honda

  • ...Upper Bearing Carrier Puller - Fit For Yamaha, Johnson, Evinrude, Suzuki, for Honda and Mercury upper bearing carrier (NOTE: with carrier style upper bearing housing)②Lower Bearing Carrier Puller - Fits For Yamaha, Johnson, Evinrude, Mercury (DOES NOT FIT VERADO), for Honda, Mercruiser.③Wrench - Fit For Yamaha Outboard Motors 2006 Serial Number 0406 To Current. Fits Yamaha 4-Strokes 150 to 350 HP, HDPI 2006+.
  • FUNCTION -- ①Puller works wonderfully for removing the bearing carrier oil seal and other tasks where a bearing puller is needed.②Wrench is specially designed to remove fuel water separator cup..
  • BENEFITS -- ①Save time and No more prying against seal surfaces. Removes toughest Lower bearing carriers effortlessly with no damage to the carriers.②Safely removes fuel water separator cup from filter assembly without damaging delicate plastic parts and avoids tangling in the water sensor wiring..
  • ADJUSTABLE -- Fits most gearcases 115hp and above. Adjustable arms allows it to be used on a variety of different sized outboard and outdrive / stern drive lower units..
  • SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying!.
Check Stock

Orion Motor Tech 3\ 4\ 6\ 8\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels

  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
  • Better Together: This professional or home tool kit includes four puller sizes to cover most applications: a 3 inch gear puller with a 4.3" max. reach and 3" max. spread.
  • a 4 inch gear puller with a 5" max. reach and 4" max. spread.
  • a 6 inch gear puller with a 7.3" max. reach and 6" max. spread.
  • and an 8 inch gear puller with a 9.3" max. reach and 8" max. spread..
  • Versatile Design: Each of the three smaller 3-jaw gear and bearing pullers can be reversed to pull parts from the inside or outside.
  • the 8 in. puller can be used in 4 different positions to deal with both medium and large parts..
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that th....
Check Stock

Orion Motor Tech 3\ 4\ 6\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels (GD)

  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
  • Better Together: This professional or home tool kit includes three puller sizes to cover most applications: a 3 inch gear puller with a 2.3" reach and 3" max. spread.
  • a 4 inch gear puller with a 3" reach and 4" max. spread.
  • and a 6 inch gear puller with a 4.7" reach and 6" max. spread..
  • Versatile Reversible Design: Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside as needed..
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that these gear pullers are backed by Orion Motor Tech's warranty and friendly customer service..
Check Stock

DURATECH 3-Piece 3-Jaw Gear Puller, 3\

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
  • Use the DURATECH 3, 4, 6-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free....
Check Stock

MOFEEZ 3\ 4\ 6\ inch 3-Jaw Gear Puller ¨C Gear Removal Tool for Slide Gears, Pulley, and Flywheel

  • DAMAGE-FREE REMOVAL: This Mofeez 3" 4" 6"8" Inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free.
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity.
  • Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application.
  • 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • The 3-inch and 4-inch gear puller has 3 positions and 6-inch and 8-inch gear pullers both have 6 positions..
  • PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach,and a 8-inch gear puller with a 10.75-inch jaw spread and 8.75-inch jaw reach.
Check Stock

Sporacingrts Outboard1 1/2' -16 Flywheel Puller Removal Tool 91-849154T1 Compatible with Mercury Mariner Compatible withce Yamaha

  • ★[ Fit For ] -- Fit for Most 45HP+ Mercury, Mariner, Force and Yamaha outboard motors with 1 1/2"-16 TPI threads but doesn't work on Verado.
  • ★[ Easy to Use] -- Made it easier to remove the flywheel without damage and easy to lift the outboard motor.
  • ★[ Precision Size ] -- Size: 1 1/2"-16 TPI Tool Threads & 5/8"-18 TPI Bolt Threads.
  • ★[ Durable Quality ] -- Nice craftsmanship, solid and heavy duty, the flywheel puller with black oxide finish to prevent from corrosion.
  • ★[ Tool Needed ] -- Needs tool when changing Mercury outboard motors on boats and lifting the engine off transom.
Check Stock

ABN 8in 3-Jaw Gear Puller – Removal Tool for Slide Gears, Pulley, and Flywheel

  • [Durable 3 Jaw Puller Tool]: Use the ABN 8-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller to remove most shift-fitted parts with ease.
  • 3 prong gear puller evenly distributes pulling force to protect your gears.
  • [Damage-Free Removal]: Manual bearing puller removes slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application.
  • [Multi-Position Design]: Universal pulley puller tool has reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility.
  • Reach measures in 4 lengths from 6.25-inches to 8-inches (15.9 to 20.3cm).
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets.
  • Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation.
  • [Works with your Existing Tools]: 9.5-inch (241.3mm) tall hex head screw fits any 19mm hand wrench, ratchet, or combination spanner for gear and bearing removal.
Check Stock

DURATECH 4-Piece 3-Jaw Gear Puller, 3', 4', 6', 8', Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CRV

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
  • Use the DURATECH 3, 4, 6, and 8-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaf....
Check Stock

ABN 6in 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel

  • [Perform Maintenance with Ease]: Remove gears, pulleys, and flywheel parts with the ABN Jaw Gear Puller Set Pulley Removal Tool.
  • Wheel bearing puller 1-pack makes removal simple and damage-free for your vehicles.
  • [Built to Last]: No need to worry about this hub puller tool falling apart when you need it most.
  • Constructed of forged and hardened steel for strength and longevity, steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • [Optimal Reach]: Struggling to access tight, cramped spaces is a thing of the past.
  • Use the small jaw puller bearing automotive gear puller Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application.
  • [Adjustable Performance]: Whether you are looking to remove parts from your engine base or your wheels, jaw puller too features universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • [Perfect Size]: 2-jaw transmission gear puller measures 6.25 inches (22.2cm) with jaw spread.
  • Universal pulley puller has 4.75-inch (12.1cm) jaw reach for your vehicle maintenance projects.
  • Use any 17mm hand wrench, ratchet, or combination spanner with this jaw gear puller set 1-pack.
Check Stock

ARES 15036 - Reversible 2/3 Jaw 2-Ton Ratcheting Gear Puller - Chrome Moly Steel Construction - 2-Inch to 3-Inch Adjustable Range - Removes Gears, Pulleys, and Flywheels

  • ITEM SPECIFICATIONS: Our 2/3 Jaw 2-Ton Ratcheting Gear Puller features three jaws and has an adjustable range of 2 to 3 inches. The smooth ratcheting action makes making adjustments a breeze, as the locking ratchet design holds the clamp open for easy installation..
  • DESIGN CONSIDERATIONS: The 2-Ton Ratcheting Gear Puller features high strength Chrome Moly Steel construction and a Manganese Phosphate coating to help prevent rust and corrosion. Our design enables the 3-jaw gear puller to quickly convert to a reversible gear puller or a 2-jaw gear puller in no time, and the finely threaded center screw allows for enhanced pulling power..
  • COMMON APPLICATIONS: The super strong low profile foot design allows for access to tight or confined spaces that traditional pullers just can't reach, as this versatile gear puller allows you to smoothly and safely slide gears, pulleys, flywheels and other press-fit parts off shaft..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Ratcheting Gear Puller, simply contact customer service for troubleshooting help, parts, replacement, or refund..
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part ....
Check Stock

MOFEEZ 3\ 4\ 6\ inch 3-Jaw Gear Puller ¨C Gear Removal Tool for Slide Gears, Pulley, and Flywheel

  • DAMAGE-FREE REMOVAL: This Mofeez 3" 4" 6" Inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free.
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity.
  • Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application.
  • 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • The 3-inch and 4-inch gear puller has 3 positions and the 6-inch gear pullers have 6 positions.
  • PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach.
Check Stock

Amerbm Gear Hub Pulley Puller Bearing Separator 2 and 3 Legged 3" 4" 6" 8" Gear Puller Set Suitable for Remove of Gears, Hubs, Ball Races, Bearings, Flywheels, Pulleys and Sprockets

  • MATERIAL: Made of heavy duty steel, high hardness and strong, bear high-intensity pressure not easy to deformation and fracture, the exterior is coated with antioxidant layer to prevent rust, extended service life..
  • FUNCTION: This gear puller set can be reversed to pull parts from either the inside or outside. Hex head forcing screws suitable for use with your wrench, ratchet or spanner swivel thrust plates on the larger sizes prevents damage to shaft ends..
  • APPLICATION: The bearing puller suitable for the removal of gears, hubs, ball races, bearings, pulleys and sprockets. Even can be used for flywheels on small engines like found in outboards, lawn mowers etc..
  • DESIGN: This removal tool kit includes four puller sizes to cover most applications: 3 inch gear puller with a 4.3" max. reach and 3" max. spread.
  • 4 inch gear puller with a 5" max. reach and 4" max. spread.
  • 6 inch gear puller with a 7.3" max. reach and 6" max. spread.
  • and 8 inch gear puller with a 9.3" max. reach and 8" max. spread..
Check Stock

ABN 3-Jaw Gear Puller Set – 3in, 4in, and 6in Removal Tool Kit for Slide Gears, Pulley, and Flywheel

  • [Durable 3 Jaw Puller Set]: Use the ABN 3, 4, and 6-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease.
  • 3 prong gear puller evenly distributes pulling force to protect your gears.
  • [Damage-Free Removal]: Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application.
  • [Multi-Position Design]: Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility.
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets.
  • Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation.
  • [Works with your Tools]: Tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal.
Check Stock