Weldflame 2 -pk Gas Nozzles 21-50F 21-50-F 1/2
- Premium quality Lincoln/Tweco style MIG gas nozzles 21-50F, 1/2" orifice, flush tip.
- Work with gas diffuser 35-50 or 51 in Lincoln Magnum 100L and Tweco Mini #1 MIG guns or equivalent guns.
- You get Two (2) gas nozzles 21-50-F at this price.DescriptionPremium quality Lincoln/Tweco style MIG gas nozzles 21-50F, 1/2" orifice, flush tip.
Check Stock
HYDRO MASTER 0179101 Universal Outdoor Misting System Calcium Inhibitor Filter (2 pcs)
- [ Solid Brass Misting Nozzles and Plug ] The misting nozzles and the plug are mechanically carved from the brass rod. Each nozzle or plug contains a black gasket, good sealing..
- [ 0.0197" Orifice (0.5 mm) Excellent Misting Effect ] The orifice of the misting nozzles and plugs is 0.5mm（0.0197"), so it will produce tiny and soft mist to make excellent cooling misting in hot summer. Diameter: 0.9cm(0.35"), Height: 1cm(0.39").
- [ 10/24 UNC Standard Thread ] The thread of the nozzles and plugs is 10/24 UNC, and matches many kinds of tee connectors widely. Such as the 1/4" tee connector, 1/2" turn 1/4" tee connectors, standing misting nozzle connector and so on..
- [ Product Included and Water Setting ] Product included: 10pcs mist nozzles and 2pcs mist plugs. Water Setting: 2-2.3GPH(us gal per hour), 0.2-0.6MPA. It's suggested to install less than 30pcs nozzles on one water line to make an excellent misting effect in common faucet/tap water pressure in the U.S..
- [ Wide Range of Use in Hot Summer ] The nozzles are used in misting system to make cooling misting, the plugs are used to stop somewhere you don't want to mist some time. It's widely used to make outdoor cooling system, agriculture irrigation system, standing misting system, trampoline misting, de....
Check StockLOOYUAN Brass Misting Nozzles 0.016\ Orifice (0.4mm) 10/24 UNC, Water Mister Parts Fog Nozzles for Patio Misting System Outdoor Cooling System (40)
- MATERIAL: The misting nozzles are made of brass with stainless steel orifice, anti-rust, durable, leak-proof, the mister nozzle is best choice for outdoor use with cold water.
- PACKAGE: 20PCS Brass Misting Nozzles For Outdoor Cooling System.
- WIDE USAGE: The misting nozzles is widely applied to outdoor cooling system, agriculture irrigation system, green house, spray disinfection, epidemic prevention, deodorizing air purification, landscaping, small fountain, etc.
- EASY TO INSTALL: The brass misting nozzles are easy to install, which can be easily screw into any 10/24 UNC threaded mist nozzle opening.
Check Stockmistcooling Pre-Assembled, Low Pressure System Kit,25' Mist Ring,Recommended for Fans with 30-46'' Di, 25 Inch Diameter 8 Nozzles, Beige Color Tubing
- 8 - Nickel-plated brass Nozzles, 7 misting Line Tubing,1 - 6 ft feed Line,1 - end elbow, 7 - misting tee, 8 Zip ties.
- Nozzles:Nickel-plated brass button series ,With stainless-steel Orifice ,Standard 10/24” thread ,in 0.015” OD Orifice ,Rust-resistant fixed impeller pin.
- Fittings :¼” OD Compression Fittings,Beige Color to blend with most patios and backyards,Compression Type Fittings,Leak Proof.
- Garden Hose Adapter : ¾” OD, Fits most Garden Faucets ,With Filter Washer to protect your nozzles.
- Tubing :¼” OD Flexible PE Tubing ,Operating Pressure 40 to 100 PSI ,UV Resistant Flexible Tubing.
- 25'' Fan Mist Ring with 8 or 10 Nozzles -Recommended for fans with 30-46'' Diameter.
- Supply Line : 6 Ft Feed Line, Low Pressure tubing , Beige Feed Line.
- Simply fix to your garden hose and ready to use.
Check Stockmistcooling Patio MISTING KIT (72 Feet - 20 Nozzles)
- Features: 72FT System 15FT Mist Line- and 57 Ft Feed Line 20 Nozzle System Evenly Spaced Nozzles at 3FT to prevent wetness on the surface 19 Misting Tees 1 Misting End Elbow Comes Complete with clamps, no additional parts needed to use.
- Completely Assembled - Can be easily attached to any surface - Directional Spray Misting - Simply fix to your garden hose and ready to use.
- Tubing : ¼” OD Flexible PE Tubing - Max burst pressure is 300 psi at 75°F- UV Resistant Flexible Tubing.
- Nozzles : Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24” thread in - 0.015” OD Orifice - Rust-resistant fixed impeller pin.
- 3/4" Garden Hose Inlet with screen filter washer. MC11285.
Check Stock
32 Pieces Brass Misting Nozzle 0.3 mm/ 0.012 Inch Orifice Replacement Head Low Pressure Atomizing Misting Nozzle and 10-24 Drill and Tap Bit for Outdoor Cooling System Patio Misting System
- 【PACKAGE】30PCS Brass Stainless Steel Misting Nozzles For Outdoor Cooling System..
- 【MATERIAL】The misting nozzles are made of brass with stainless steel orifice, anti-rust, durable, leak-proof, the mister nozzle is best choice for outdoor use with cold water..
- 【TECHNICAL PARAMETERS】High Pressure Outdoor Anti-drip Fogging Spray Head, 0.012" (0.3mm) orifice diameter, 10-70kg working pressure, 60-110ml/min flow rate.It is recommended to increase the use of pumps to achieve a better spray effect..
- 【EASY TO INSTALL】 The brass misting nozzles are easy to install, which can be easily screw into any 3/16"( UNC 10/24) threaded mist nozzle opening..
- 【WIDE USAGE】The misting nozzles is widely applied to outdoor cooling system, agriculture irrigation system, green house, spray disinfection, epidemic prevention, deodorizing air purification, landscaping, small fountain, etc..
Check Stockmistcooling Stainless Steel Fan Misting Ring
- 12 Inch Stainless Steel Mist Fan Ring with 4 Nozzles and 6 FT Supply Line with Garden Hose Adapter.
- Adjustable spray direction. Fan mist kit does NOT include fan.
- Ultrafine brass/stainless steel nozzles included - 0. 015" Orifice - 10/24 thread nozzles.
- Ready to use - no other parts needed - simply attach to your Outdoor fan.
Check StockM MINGLE Foam Cannon Orifice Nozzle Tips and Foam Maker Universal 1.1 mm Thread Nozzle and Mesh Filter for Snow Foam Lance 3000 PSI
- ATTENTION: Please screw in the orifice nozzle tighten enough, or it is hard to get thick foam..
- Include 1 piece of foam maker (mesh filter) and 1 piece of orifice nozzle tips (foam generator nozzle). They assembly inside foam cannon for foam....
- If foam cannon works not very well as before, maybe mesh filter wore down and foam cannon orifice tips blocked. You can replace them with new ones and....
- FOAM MAKER: Size: Diameter 0.61 x Height 0.41 inch.
- foam creator made of stainless steel, work durably in the foam sprayer.
- ORIFICE NOZZLE TIPS: NPT male screw nozzles, about 0.28 inch, Orifice Size 1.1 mm. Made of brass, work durably in the foam lance. Max. Pressure: 3000....
Check StockTool Daily Pressure Washer Nozzle Tips Multiple Degrees, 1/4 inch, 5-Pack (Orifice 3.0)
- ATTENTION: Please see Image 2 and find the orifice you need based on working pressure and flow rate (GPM). The orifice of these nozzles are 3.0. The working pressure is up to 4000 PSI..
- Different angle allows you to clean hard-to-reach areas quickly and easily.
- Nozzle Tips set includes: 1 Red Stainless Steel Nozzle Tip (0 Degree), 1 Yellow Stainless Steel Nozzle Tip (15 Degree), 1 Green Stainless Steel Nozzle Tip (25 Degree), 1 White Stainless Steel Nozzle Tip (40 Degree), 1 Brass soap nozzle tip (65 Degree). Choose different angles nozzle according to the actual need.
- Don’t use a ladder to clean or sprinkle water for tree with these nozzles.
- More Application: Can be attached to a Quick-Connect Wand for swifter application and more.
Check StockTool Daily Pressure Washer Nozzle Tips Multiple Degrees, 1/4 inch, 5-Pack (Orifice 3.5)
- ATTENTION: Please see Image 2 and find the orifice you need based on working pressure and flow rate (GPM). The orifice of these nozzles are 3.5. The working pressure is up to 4000 PSI..
- Different angle allows you to clean hard-to-reach areas quickly and easily.
- Nozzle Tips set includes: 1 Red Stainless Steel Nozzle Tip (0 Degree), 1 Yellow Stainless Steel Nozzle Tip (15 Degree), 1 Green Stainless Steel Nozzle Tip (25 Degree), 1 White Stainless Steel Nozzle Tip (40 Degree), 1 Brass soap nozzle tip (65 Degree). Choose different angles nozzle according to the actual need.
- Don’t use a ladder to clean or sprinkle water for tree with these nozzles..
- More Application: Can be attached to a Quick-Connect Wand for swifter application and more.
Check StockTool Daily Pressure Washer Spray Nozzle Tips Multiple Degrees, 1/4 inch 5-Pack (2.5 GPM)
- ATTENTION: Please see Image 6 and find the orifice you need based on working pressure and flow rate (GPM). The orifice of these nozzles are 2.5. Different angle allows you to clean hard-to-reach areas quickly and easily.
- Nozzle Tips set includes: 1 Red Stainless Steel Nozzle Tip (0 Degree), 1 Yellow Stainless Steel Nozzle Tip (15 Degree), 1 Green Stainless Steel Nozzle Tip (25 Degree), 1 White Stainless Steel Nozzle Tip (40 Degree), 1 Brass soap nozzle tip (65 Degree). Choose different angles nozzle according to the actual need.
- Don't use a ladder to clean or sprinkle water for tree with these nozzles.
- More Application: Can be attached to a Quick-Connect Wand for swifter application and more.
Check StockHigh Pressure 3/16\ Threaded Outdoor Anti-drip Fogging Spray Head Misting System Nozzle, Orifice 0.3mm 10-Pack
- High Quality Material: The misting nozzles are made of brass with stainless steel orifice, anti-rust, durable, leak-proof, the mister nozzle is best choice for outdoor use with cold water.
- Wide Usage: Widely apply for garden, patio, lawn misting system, outdoor cooling, greenhouse, humidification, spraying disinfectant, epidemic prevention, deodorant air purification, small fountain, outdoor cooling system, agriculture irrigation system, etc..
- Dimension: Thread size is UNC 10-24, Orifice diameter is 0.4mm.
- Easy to Install: The brass misting nozzles are easy to install, which can be easily screw into any 10/24 UNC threaded mist nozzle opening.
- Leak-proof, self-sealing o-ring included with each brass nozzle.
Check StockMUTURQ 25 Degree Surface Cleaner Tips with 2.5 Orifice 1/4 Male NPT 4000 PSI Threaded Spray Nozzles Stainless Steel 2 Pcs
- 【25 Degree, 2.5 Orifice, 2.5 GPM】Include 2 pieces of pressure washer surface cleaner nozzles, universal replacement screw type nozzle for water....
- 【Max Pressure 4000 PSI】Made of 304 stainless steel, more durable resistant and good quality for using a long time..
- 【Product Details】1/4'' Male NPT, Orifice Size is 2.5, Spray angle is 25 degree, 2.5 gpm. The outsize diameter of thread is 0.55 inch. Length of....
- 【Please Note】If nozzles are blocked with sand or other debris, you can remove the nozzle, clean with needle and rinse with fresh water..
- 【Full Service】If you have any usage problems in after sale, you can contact us by email at any time, and we will offer solutions or replacement....
Check Stock
