Reviews Optical Splice Box

ABN Fuse Tap Fuse Holder & Fuse 5-Pack 12V Add a Circuit Kit Standard ATO Fuse (NOT Mini) Blade & 15A AMP Adapter

  • ...STALL DEVICES WITHOUT SPLICING: Add devices and accessories to your car or any vehicle with compatible sized fuses without cutting into wires.
  • Designed to allow you to turn 1 fuse slot into 2 while providing protection for both circuits.
  • Tap the fuse box to power additional electronic devices with no need to cut or splice.
  • Use this to add a circuit without cutting into your wire harness.
  • Easier to access and to know which circuit you are on than tapping into difficult existing lines.
  • VARIOUS APPLICATIONS: Gives you the positive side of your battery so you can hardwire a 12V radio, LED light strip, radar detector, dash cam, GPS, backup camera, USB charger, or any other small electronic device that requires direct wiring into the fuse box (fuse to factory fuse panel) without needing to cut or splice.
  • If replacing a radio, use the existing radio wiring.
  • FITS YOUR VEHICLE: Allows user to turn 1 fuse slot into 2 while providing protection for both circuits.
  • Designed for use with standard 15A ATO fuses (not mini).
  • Includes a connector on the end of the wire for your convenience.
  • EASY TO USE: Pop in this automotive fuse tap replacing the existing fuse to have a great tap for your accessories.
Check Stock

WANLUTECH OTDR Tester CCTV Tester, 1310/1550nm OTDR Fiber Optic Tester 8'' Touchscreen Built-in DMM OPM OLS VFL Event Map Support TVI CVI AHD IP CVBS Camera Test PoE/HDMI in/RJ45 Cable TDR Test

  • ✅【All-in-one OTDR Tester】WANLUTECH MT-8000 combines all necessary fiber optic testing in one handheld device.This OTDR tester includes Optical Time Domain Reflectometer (OTDR:1310nm+1550nm,28dB/26dB,max test distance can up to 110km), Visual Fault Locator (VFL:max test distance 8km), Optical Power Meter (OPM:measurement range -70~+10 dBm), Light Source (CW,270 Hz, 330 Hz, 1 kHz and 2 kHz),Digital Multimeter(DMM) , Optical Loss Test, RJ45 cable test, Event Map, etc..
  • ✅【Professional OTDR Fiber Optic Tester】WANLUTECH OTDR tester uses automatic testing by default, just click to start testing after connecting into the fiber, there is no complicated parameter setting.
  • professional technicians can set the test range, pulse width and other parameters before testing, which will get more accurate curve results.Warning function could prevent OTDR module from being damaged by optical signal in fiber..
  • ✅【Parameters】WANLUTECH multifunctional Single Mode OTDR has 8'' retina touch screen, 2048*1536 resolution. OTDR fiber tester is powered by 7.4V/7000mAh Li-polymer batter with long working time.Interface type:FC-PC.1310nm/1550nm Testing Wavelength and 28....
Check Stock

Nilight 50047R 110pcs Nylon Flag Spade Female Insulated Quick Disconnects 22-18 16-14 12-10 Gauge Flag Spade Electrical Crimp Terminals Connector Assortment Set

  • Quick splice connectors: enables the quick addition of a circuit without cutting, striping or splicing. Don’t need special tools, just use the....
  • Type: Flag female splice terminals. Nylon fully insulated spade crimp terminal, suitable for 22-16 a.W.G (red) 0. 5-1. 5mm²/ 16-14 a.W.G (blue) 1.....
  • Easy to store: products are placed in a plastic box, portable and convenient.
  • Thick Tinned copper contacts: thinker Tinned copper contacts will not bend even when tapping into thicker wires, can keep the current stable, decrease....
  • Package Include: 110 PCs, color: red=40 PCs, blue=40 PCs, yellow=30 PCs.
Check Stock

Stens 635-701 Cylinder Plug, Replaces Partner 503552201,Silver

  • High quality: Wire splice clips are made of high quality materials that are not easily damaged, durable and have a long life cycle..
  • Performance: A quick way for wire splice clips to connect additional wires to existing wires. It can be connected directly without stripping. Locked off, perfect for a solid wire connection..
  • Economical: Wire splice clips are very economical and practical, which is a good buying option..
  • Easy to install: Wire splice clips are easy to install and can replace old or broken ones directly..
  • Service commitment: If you have any question or any unsatisfactory about the product, you can contact our customer service at any time, when we received it,we will deal with it as soon as possible..
Check Stock

FC-6S Optical Fiber Cleaver Stripping Cutter Tool Cleaves for SUMITOMO with 36000 Cleaves and Coating Diameter: 250μm - 900μm 12 Position Blade Cold Connection Tools Fiber Equipment Used in FTTH

  • FC-6S Optical Fiber Cleaver Stripping Cutter Tool Cleaves Used in FTTH, Applicable fibers: Single-Mode or Multimode Silica optical fiber.★ Cold Connection Tool Equipment Bare fiber diameter:125um,Coating diameter:250-900um.
  • Cleaving angle: 0.5-0.8 degrees with single fiber..
  • Replicable Blade: Contained 16 Position Rotatable blades, Blade life: Provides approximately 48000 times (100*16*3) cleaves.★ Durability & Compact body: High hardness aluminum alloy materials, Lightweight and rugged design for longer life and increased durability..
  • Scientific Design: The fiber cleaver Built-In Fiber Holder can hold 250μm and 900μm fiber with a readable scale for accurate cleave lengths from 5 to 20mm and also has a built-in trash can for easy disposal..
  • High Precise Cleaving: Provides a cleave with a cutting angle of less than 0.5°for optimal fiber preparation for fusion splicing, Coating Diameter: 250um ~ 900um buffer fiber. Large & small adjustable knife, easy to operate. Non-slip bottom,easy to use..
  • Wide Application: Ideal for field splicing applications, splicing trucks, laboratories, fiber technicians, fiber splicers, and anyone that needs to cleave a fiber optic cable prior to performing a fusion splice..
Check Stock

Digital Optical to Analog 3.5mm AUX Audio Cable, Optical to 2RCA Adapter, All-in-one D/A Audio Converter, for TV/PS4/Xbox/DVD SPDIF/TOSLINK/Optical Port to Sound Box Amplifier Headphones (10ft)…

  • 【All-in-one Digital to Analog Converter Cable】: This all-in-one optical to 2RCA+3.5mm AUX digital to analog audio converter cable is a combination of digital to analog converter with optical and cable, you don't need to buy optical and cable separately. It converts optical/SPDIF/TOSLINK/interface optical digital audio signals to 2RCA (L/R) and 3.5mmAUX output analog audio signals (Note: the optical end is the signal input, not reversible!) ..
  • 【Applicable Devices]】Suitable for connection between Smart TV/PS4/Xbox One/DVD/network set-top box and audio signal amplifier/sound box/headphones..
  • 【Easy to Connect】You just need to connect one end of the audio cable to the Optical/SPDIF/TOSLINK audio output port of the above applicable devices, and the other end to the RCA(L/R), 3.5mm AUX audio input port of sound box, amplifiers, headphones, to provide you with a superior stereo experience!.
  • 【HD Sound Quality】 Optical fiber transmission signal is not subject to external RF and electromagnetic interference. Audio cable is made of elastic material, not hard in winter, resistant to pulling and not tangled. Aluminum alloy shell, oxygen-free copper conductor, gold-plated connectors, efficient transmission of optical fiber core, intelligent conversion ....
Check Stock

6 Gang Switch Panel, OFFROADTOWN Universal Circuit Control Box Button Switch Electronic Relay System Pod Touch Switch Box with Label Stickers for Truck UTV ATV SUV Boat Car

  • ...ion you like, such as dashboard, dash panel, center console, overhead sunglasses holder, etc..
  • ALL IN ONE - The kit has everything you need for installation and use. No need to buy extra parts. Box come with 6 gang switch panel, circuit control box, 24pcs labels, 3M double-sided tape, panel bracket, Replaceable butt splice connectors, wire splice connector, zip ties, screws, instruction. We provide TWO YEARs quality assurance and 24 hours hassle-free after-sales service..
Check Stock

Optical Fiber Fusion Splice Protection Sleeve Spatula

  • These spatulas assist to remove fusion splice sleeves from splice protection chips.
  • Flat and large surface area allows the loosening of splice protection sleeves without damaging them.
Check Stock

Michelin Heavy-Duty Inner Tube - 70/100-17 - TR-4 71077

  • Features an overlap splice which is stronger than the butt splice used on most tubes.
  • Splice is always placed opposite the valve stem to help balance the tube.
Check Stock

MICHELIN Inner Tube (140/80-17)

  • The Michelin Inner Tube provides outstanding protection against punctures and pinch flats, and is the perfect choice for when the road gets tough.Features an overlap splice which is stronger than the butt splice used on most tubes.Splice is always placed.
Check Stock

Kenda 677052B8 Heavy Duty Motorcycle Tube - 100/100-18(400-18) TR-6 , Red

  • Features an overlap splice which is stronger than the butt splice used on most tubes.
  • Splice is always placed opposite the valve stem to help balance the tube.
Check Stock

Focusrite Scarlett Solo 3rd Gen USB Audio Interface Bundle with Headphones and XLR Cable

  • ... Software: There’s no better way to step into studio recording – your Scarlett interface comes with some of the best loved tools in the business, including Hitmaker Expansion, with exclusive content from legendary Auto-Tune creators Antares, along with Brainworx, Softube, XLN Audio, Relab and more..
  • Free 3-Month Splice Sounds Subscription: Focusrite has partnered with Splice to give 3rd Gen Interface owners a free 3-month Splice Sounds subscription when setting up a new Splice account. Splice Sounds offers millions of high-quality, royalty-free one-shots, loops, and presets, with new releases daily from your favorite producers, sound designers, and artists.
Check Stock

MICHELIN Heavy Duty Inner Tube (70/100-17)

  • Featuring a 2.7 mm wall thickness, the Michelin Heavy-Duty tube is made specifically for those who push their tires in some of the roughest of conditions..
  • Heavy-Duty Tubes are reinforced for off-road applications and provide outstanding protection against punctures and pinch flats..
  • Features an overlap splice which is stronger than the butt splice used on most tubes..
  • Splice is always placed opposite the valve stem to help balance the tube..
Check Stock