Reviews Open Mesh Abrasives

2 inch by 2 inch Micro-Mesh Soft Touch Sanding Pads w/ Galvanized Steel Dispenser - Ideal for Pen & Bottle Stopper Turning Perfect For Cycle Sanding Acrylic Materials (9 Micro Mesh Pads w/ Dispenser)

  • When using the pads it is recommended that start at the lower grit of 1500 and step or cycle your way up to the high grit of 12000. The more you get into to woodturning the more the reality of being organized comes into play. This couldn’t be more true than when it comes to our abrasives. This unique dispenser accepts 2” x 2” Micro-Mesh abrasive pads.
  • Specifically designed for the Micro-Mesh 2” x 2” 9 pack of abrasives, this dispenser has color coded grit chart to help keep your pads in order. This works wonderfully well when step sanding your finished turning project. Simply cycle your way through the grits by pulling the next grit from the dispenser and placing the used one back on top..
  • The dispenser is made from corrosion resistant galvanized steel which also makes it extra durable for the workshop environment. It can be mounted flat against a wall or it can be mounted to a table top. Of course you don’t have to mount it at all..
  • The dispenser measures 6” tall, 3¼” wide (at base tabs), 2-7/16” wide (actual abrasive holder) by 1½” deep. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process. Package comes with 9 co....
Check Stock

Micro Mesh 9 Sanding Sheet Introductory Woodworkers Kit with a 2 inch by 3 inch Foam Sanding Block

  • Micro-Mesh is a unique cushioned abrasive that produces a very fine and uniform scratch pattern. The nine grades of abrasives range from 1500 grit to 12000 grit. The 1500 is similar in grit range to conventional 400 grit wet/dry sandpaper. The 12000 will leave a scratch pattern that cannot be detected by the human eye and produces a wonderful looking finish. Micro-Mesh abrasives can polish to a high reflective state or leave a matte or satin finish depending upon where you stop..
  • Before starting the Micro-Mesh cycle of abrasive sanding, coarse sanding should be done using up to 320 grit sandpaper. Shaping, sawing or turning of the work piece should be complete.Begin with 1500 Micro-Mesh. Sand until all of the sandpaper scratches are removed. Continue with the MICRO-MESH series and cycle up to the desired look (1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000). Thinned lemon oil or Danish oil can be applied as a finish on bare wood..
  • MicroMesh performs very well in conjunction with polyurethane, polyester, epoxy, lacquer and so on. Follow the manufacturer’s recommended cure times prior to re-coating or applying the finish coat. When you are applying multiple coats, sand from 1500 Micro-Mesh to 3200 or 3600 between coats to remove any orange-peel o....
Check Stock

Sungold Abrasives 11117 9" X 11" 400 Grit Sheets Stearated Aluminum Oxide, 25-Pack

  • Used for wood metal plastic fiberglass paint primer solid surface materials composites.
  • Open coat grain with a non-loading stearate minimizes loading with a cool cut for longer lasting abrasives.
  • Strong C-weight paper backing with latex impregnated paper for strong and flexible backing abrasives will not come off when folded over.
  • P graded heat treated aluminum oxide grain provides fast smooth cut while fracturing to create new cutting services extending abrasive life.
  • Full resin on resin bond to keep the grain on the cutting surface and waterproofing the sheet.
Check Stock

Sungold Abrasives 27215 4-1/2" Wide PSA Roll 280 Grit Stearated Aluminum Oxide Sandpaper, 10 yd.

  • Used for wood metal plastic fiberglass paint primer solid surface materials composites hand sanding and half & quarter sheet sanders.
  • Open coat grain with a non-loading stearate minimizes loading with a cool cut for longer lasting abrasives.
  • Strong c-weight paper backing with latex impregnated paper for strong and flexible backing abrasives will not come off when folded over.
  • P graded heat treated aluminum oxide grain provides fast smooth cut while fracturing to create new cuting services extending abrasive life.
  • Full resin on resin bond to keep the grain on the cutting surface and waterproofing The sheet.
Check Stock

Sungold Abrasives 14272 320 Grit 9" X 11" Sanding Sheets Non-Loading Stearated Silicon Carbide, 100 Sheets/Sleeve

  • Used for wood metal plastic fiberglass paint primer solid surface materials composites.
  • Open coat grain with a non-loading stearate minimizes loading with a cool cut for longer lasting abrasives.
  • Strong C-weight paper backing with latex impregnated paper for strong and flexible backing abrasives will not come off when folded over.
  • P graded silicon carbide grain breaks down to create sharp points to cut well producting a consistent finish.
  • Full resin on resin bond to keep the grain on the cutting surface and waterproofing the sheet.
Check Stock

Micro-Mesh Pen Sanding Kit

  • Includes 1500, 1800, 2400, 3200, 3500, 4000, 6000, 8000 and 12000 grit pads.
  • Last up to 15 times longer than normal abrasives.
Check Stock

Cubitron 3M (31361) II Hookit 3" Clean Sanding Abrasive Disc

  • Electrostatically oriented triangular-shaped grain cuts 30% faster than other premium abrasives.
  • Precision shaped, self-sharpening grains last twice as long vs. Conventional industrial abrasives.
  • Sharper cutting surface means less pressure is required for reduced friction and wear.
  • Clean sanding multi-hole pattern Delivers excellent dust extraction.
  • Hook it hook-and-loop style Disc attaches firmly, removes quickly for fast Disc change-out.
  • Precision shaped, self-sharpening grains last twice as long vs. conventional industrial abrasives.
  • Clean Sanding multi-hole pattern delivers excellent dust extraction.
  • Hookit hook-and-loop style disc attaches firmly, removes quickly for fast disc change-out.
  • Long lasting and fast acting abrasive disc for paint removal and featheredging.
Check Stock

Micro-Mesh 3 x 4 Soft Touch Pads

  • Pen, Bottle Stopper or even small goblet finishing just became a bit more enjoyable with the Micro-Mesh Soft Touch sanding pads! Start with the lowest grit of 1500 all the way up to 12000 grit..
  • This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional! Using the step up process will leave your project finish looking wonderful ..
  • The pack includes 9 each 3 inch by 4 inch soft touch pads in the following grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 plus a color coded grit guide..
  • Ideal for use with acrylics, plastics, resin or impregnated blanks when turning. Works great on automotive and marine body work. The pads can also be used around the home for fine repair work..
  • Pads are colored coded with foam backing for easy grit identification. Colors may vary from images shown here. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process..
Check Stock

Mesh Sheet Sandpaper 120 Grit 1/4 Sheet Hook & Loop or Clip on Sander Sheets 5.5\ x 4.5\ Dust Free Sanding Sheets for Palm Sanders Polishing Accessories, 10PCS

  • 【Dust Free】 Multifunctional net sanding material, super anti-clogging effect can effectively reduce dust deposition..
  • 【Convenient Design】Universal mesh design for use on any hole pattern. Hook & loop system makes sandpaper replacement easier and faster..
  • 【Widely Used】Widely used for sanding treatment of dry board walls before dusting.
  • derusting, grinding and polishing of various metal surfaces.
  • as well as the polishing of wood, stone, machinery equipment,etc..
  • 【Efficient & Economical】Our mesh sheet has better grinding effect and a longer lifespan than traditional abrasives. Save your time and money!.
  • 【Product Content】The package includes 10 pieces of 120 grit 1/4 mesh sheet sandpaper.If you have any questions, please contact us, we will provide you with satisfactory after-sales service, please rest assured to place an order!.
Check Stock

3M 7300 Black 17-Inch High Productivity Pad (5 per Case)

  • 3M’s most aggressive stripping pad quickly and effectively removes four or more coats of finish.
  • Unique open construction resists loading and clogging.
  • Web of continuous filaments coated throughout with resin and abrasives provides high performance over the life of the pad.
  • Can be backed with a red buffing floor pad for optimum pad-to-floor contact.
  • For use with rotary and automatic floor machines running at low speed (175-600 rpm).
Check Stock

3 x 4 Micro-Mesh TM Sanding Pads 9 Grits

  • Pen, Bottle Stopper or even small goblet finishing just became a bit more enjoyable with the Micro-Mesh Soft Touch sanding pads! Start with the lowest grit of 1500 all the way up to 12000 grit..
  • This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional! Using the step up process will leave your project finish looking wonderful ..
  • The pack includes 9 each 3 inch by 4 inch soft touch pads in the following grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 plus a color coded grit guide..
  • Ideal for use with acrylics, plastics, resin or impregnated blanks when turning. Works great on automotive and marine body work. The pads can also be used around the home for fine repair work..
  • Pads are colored coded with foam backing for easy grit identification. Colors may vary from images shown here. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process..
Check Stock

Aexit 6mm Thick Finishing Tool Accessories Polishing Disc Abrasives Cutting Wheel Plate Joiner Accessories for Metal

  • Package Content : 1 x Abrasives Cutting Wheel.
Check Stock

Work Sharp WSSAKO81114 Tool Grinder Attachment Replacement Belt Kit

  • Extra Coarse Grit Replacement Abrasive Belt Kit for the Work Sharp Knife & Tool Sharpener Ken Onion Edition (WSKTS-KO)..
  • Kit includes (5) P120 Extra Coarse Grit Norton Ceramic Belts..
  • Belts are 3/4" x 12" and ONLY fit the Ken Onion Edition Sharpener and Tool Grinding Attachment..
  • These premium grade, engineered abrasives are long lasting and designed for knife & tool sharpening and grinding applications..
  • Belts are manufacted in the USA by Norton Abrasives for Work Sharp..
Check Stock