Reviews Open End Spanner

2-in-1 Lock Nut Wrench Clutch Lock Nut Tool 20mm/24mm clutch lock nut spanner socket for Crf 600rr 450r 250l

  • STURDY SOLID MATERIAL -- The clutch lock nut spanner is made of solid steel material, sturdy construction, durable in using.
  • DESIGNED FOR LOCK SPANNER KIT -- A special and perfect replace grom clutch removal tool for : Replace special tool: # 07716-0020100,....
  • IMPORTANT DATA FOR YOU TO CHECK -- Large End Inner Diameter: 24mm / 0.94 inch.
  • Large End Outer Diameter: 30mm / 1.18 inch.
  • COMES WITH 4 PIN LOCK NUT SPANNER -- 4-pin socket clutch nut tool, each end has 4 pegs.
  • One side is 20mm inner diameter and another side is 24mm inner....
  • FITMENT -- This clutch nut tool can be used for 14mm clutch lock nut on: crf50, xr200 1980-1984, xr200r 1984-1994, xr250l 1991-1994, xr250r 1986-1994,....
Check Stock

uxcell M50x1.5mm Retaining Four-Slot Slotted Round Nuts, 2 Pcs

  • For our selection of hook spanner wrenches for use with these components, see DIN 1810A hook spanner wrenches with nose end.
  • On slotted spanner nuts DIN 1804, the ground surface protrudes slightly and should be used as a mating surface.
Check Stock

uxcell M25x1.5mm Retaining Four-Slot Slotted Round Nuts, 4 Pcs

  • For our selection of hook spanner wrenches for use with these components, see DIN 1810A hook spanner wrenches with nose end.
  • On slotted spanner nuts DIN 1804, the ground surface protrudes slightly and should be used as a mating surface.
Check Stock

PSCCO 4PCS 2 Holes Cylindrical Barrel Nut Cross Dowels Slotted Nut for Furniture Beds Headboard Cribs (8x60mm+8x82mm)

  • For our selection of hook spanner wrenches for use with these components, see DIN 1810A hook spanner wrenches with nose end.
  • On slotted spanner nuts DIN 1804, the ground surface protrudes slightly and should be used as a mating surface.
Check Stock

Park Tool (109917) HCW-5 Lock Spanner

  • Double sided bottom bracket lockring hook spanner.
  • One side is a single hook, the other is a hook spanner with 3 notches for better engagement in the lockrings.
  • The three-hook end will fit 3-notch lockrings with a maximum outside diameter of 46mm, and minor diameter (in the notches) of 40mm.
  • NOTE: The HCW-5 is designed for bottom bracket lockrings. For fixed gear lockring, use the HCW-17.
Check Stock

Yadaland 20mm Diameter M8 Slotted Barrel Nuts Assemble Easily Joints Stronger Consistent Threads Snug Fit Carbon Steel Cross Furniture Dowels 6 Pieces for Loft Beds Crib Benches Chairs Cabinets

  • For our selection of hook spanner wrenches for use with these components, see DIN 1810A hook spanner wrenches with nose end.
  • On slotted spanner nuts DIN 1804, the ground surface protrudes slightly and should be used as a mating surface.
Check Stock

Body Candy Stainless Steel Combo Wrench Barbell Nipple Ring Set of 2 14 Gauge 13mm

  • Gauge size 14 gauge nipple rings for women 1.6 millimeters.
  • sexy nipple piercing jewelry for everyday body jewelry wear.
  • Made with durable 316L stainless steel nipple jewelry surgical steel straight barbells.
  • Open ended spanner wrench and ring spanner wrench ends.
  • Sold as a set of 2 combination wrench nipple barbells.
Check Stock

Eowpower Chrome Vanadium C Spanner Tool Adjustable Hook Wrench Square head - 2"-4 3/4"(51-121mm)

  • Package contents: you will receive 1 piece adjustable C spanner with exquisite design, the length of it is about 21 cm/ 8.27 inch, suitable for outer nut in diameter of 19 - 51 mm.
  • Sturdy and durable: made of quality chromium-molybdenum alloy steel material, the chromium vanadium C spanner is sturdy and durable, not easy to corrode, rust, deform or damage, can serve you for a long time.
  • Considerate design: the C spanner hook wrench comes with a movable head, which makes it easy to adjust the size, and the end has a circular hole, convenient for you to carry out and store.
  • Bringing much convenience: the precision-machined slide jaw and worm gear allow for exact fastener fit and smooth adjustment, can minimize the risk of damage to shafts and nuts, saving your time and labour, make your life easier.
  • Functional usages: these adjustable hook wrenches can be widely applied to tighten side slot nuts on collars, lock nuts and bearings, suitable for daily and work use, can be a nice present to your family or friends who need them.
Check Stock

VANICE Bike Freewheel Removal Repair Lockring Tool, Compatible with Shimano, Sunrace and Other 12 Spline Freewheels

  • Good Compatibility - Compatible with Shimano, Sun Race, Saches and other similar 12 spline freewheels. Not compatible with cassette lock rings.
  • High Quality - Heat treated alloy tool steel construction for a lifetime of use.
  • Easy To Use - Use any ½” drive ratchet or 21mm spanner wrench to rotate the tool (open end wrench, crescent wrench etc).
  • VANICE Professional and pratical bike bicycle freewheel remover tool. Thin wall construction allows use without removal of cones and locknuts.
  • CASSETTE OR FREEWHEEL? To determine the type of rear sprocket system you have, find the tool fitting on the sprocket set. Spin the sprockets backwards. If the fitting spins with the cogs, it is a cassette system. If the tool fitting does not spin with the cogs, it is a freewheel system.
Check Stock

BIKEHAND 34 in 1 Complete Bike Bicycle Repair Tools Maintenance Tool Kit with Torque Wrench

  • Bike Hand advanced mechanic tool kit includes 33 items: Chain Scrubber (YC-790).Hub Cone Spanner 13/14/15/16/17/18mm (YC-658-13-18).Adjustable Chain Remover (YC-324SC).Freewheel Remover (YC-126-2AL).Freewheel Turner/Pedal Wrench (YC-515).Chain Ring Nut Wrench (YC-271).
  • Spoke Wrench 0.127" = 3.2mm (YC-1R-1).Spoke Wrench 0.130" = 3.3mm (YC-1R-2).Spoke Wrench 0.136" = 3.5mm (YC-1R-3).Flat / Philips Screwdriver (YC-611).Flat Screwdriver (YC-612).Master Link Tool (YC-355CO).
  • Cable Cutter (YC-767).Dust Cap Wrench (YC-27).Ball-End Hex Key Wrench 1.5/2/2.5/3/4/5/6/8/10mm (YC-623).Chain Wear Indicator (YC-503).Bottom Bracket Wrench for Hollowtech II BB, BB-9000, BBR60 and FSA Mega Evo (YC-307BB).
  • Chain Hook (YC-207).8mm/10mm Spanner (YC-151 -8-10mm).9mm/11mm Spanner (YC-151 -9-11mm).Patch Kit (YC-123).Crank Puller (Yc-215CB), Cartridge BB Tool (YC-26BB-1A).Dual Functions Wrench (YC-172).Metal Tire Lever, Length: 202mm (YC-3125) Torque wrench YC- 637 ( 0-10 Nm) + Bits ( T10 T25 2 2.5 3 4 5 6 8 PH2).
  • ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide a life time warranty ! Made in Taiwan..
Check Stock

PARK TOOL (109916) HCW-4 Box End and Pin Spanner Crank Wrench (36mm)

  • 29mm distance between pins on spanner end.
Check Stock

Adjustable Spanner Mini Nut Wrench Silver Shifting Spanner Wrench Small Adjustable Wrench with Chain Hand Knurl Tool for Repair Maintenance Automotive Car (2, 2.5 Inch, 4 Inch)

  • ... with a polished surface, featuring carefully forging and heat design, sturdy and reliable, not easy to corrode, rust, deform or break, so it can serve you for a long time.
  • Chain Design: our mini wrench set is small with a hole in the end of the wrench handle, hanging a chain on it, so you can hang the mini 2.5 inch spanner on your keys.
  • This small portable wrench can offer help in the first place when you encounter a problem, instead of worrying about having no tools to deal with it.
  • Adjustable hand wrench: the stubby adjustable spanner has rollers, so you can adjust the size according to your own needs.
  • The wrench mouth adjustment range of the 2.5 inches wrench is about 0-10 mm/ 0-0.39 inch, and the wrench mouth adjustment range of the 4 inches wrench is about 0-14 mm/ 0-0.55 inch, you can adjust it freely.
  • Lightweight and Portable: these adjustable wrench sets are lightweight, convenient and easy for you to carry out without bringing much burden to you.
  • The package included: there are 1 piece of mini 2.5 inches adjustable hand wrench and 1 piece of 4 inches spanner in the package.
  • The 2.5 inches adjustable hand wrench measures approx. 63 x 20 x 5 mm/ 2.5 x 0.78 x 0.19 inches, and the 4 inches spanner is about 101 x 30 x 8 mm/ 4 x 1.18 x 0.31 inch....
Check Stock

Yamaha 90185-08169-00 NUT, SELF LOCKING; 901850816900

  • Large End Inner Diameter: 24mm / 0.94 inch.
  • Large End Outer Diameter: 30mm / 1.18 inch.
  • Made of solid steel material, durable in using. 4-pin socket spanner tool, each end has 4 pegs.
  • One side is 20mm inner diameter and another side is 24mm inner diameter. A special and perfect replace tool for ..
  • We provide 24 months guarantee, you can buy with no worry. If you have any issue about our products, you can contact us by e mail freely, we will try our best within 24 hours to reply.
Check Stock