Reviews One Piece Scope Mount

Monstrum Extended Series Offset Picatinny Scope Mount | 30 mm Diameter | 20 MOA | Black

• Built specifically for long range scopes – 6-24x magnification scopes and above – with 3 inches of spacing between scope rings to accommodate scopes with longer dimensions and larger adjustment housing.
• Lightweight one-piece scope mount for mounting standard 30 mm diameter tube rifle scopes – with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount.
• Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle – guaranteed to hold zero against the toughest of recoil.
• Available in three styles – a 0 MOA mount for zeroing your scope at short to mid range distances, a 20 MOA mount for zeroing your scope at longer distances, and a 30 MOA mount for serious long distance shooters..
• Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.

Durasight DS409B Dead On Mount

• Dead On One Piece Ring/Base - Low Black 1"DescriptionDead On One Piece Ring/Base - Low, Black, 1"Manufacture ID: DS409BThis innovative design uses Z2 Alloy to make it the strongest mount available for your CVA rifle and scope. The DEAD-ON one-piece system is the fastest way to mount optics on your CVA rifle and will give you years of rock-solid performance. A one-piece system also means there are fewer parts than can come loose to affect your accuracy. Plus, the molded Z2 Alloy ensures better ring alignment to grip your scope tighter but with less stress on the scope tube.Specifications:- Fits CVA Apex, Optima Elite Center-Fire Barrels, New CVA Scout Rifle (all Models) and all 2010 or later Model CVA Muzzleloaders (Wolf, Optima, Accura V20Height: LowFinish: Black.

Monstrum Dual Ring Scope Mount for Savage Arms Axis/Edge Rifles | 1 Inch Diameter | Pre 9/2021 Models

• Please note that as of 9/2021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on your rifle. For models manufactured before 9/2021 (Serial numbers below N936371), purchase the Pre 9/2021 compatible mount. For models manufactured after 9/2021 (Serial numbers above N936371), purchase the Post 9/2021 compatible mount..
• Dedicated one piece dual ring scope mount built specifically for the Savage Arms Axis/Edge platform.
• 1 inch in diameter for precision mounting of standard 1 inch tube rifle scopes.
• Precision machined from 6061 grade aluminum, comparable in weight to most scope rings with the added rigidity of a unified one piece mount design.
• All Monstrum scope mounts and accessories come with a lifetime guarantee.

Monstrum Dual Ring Scope Mount Compatible with Ruger 10/22 | 1 Inch Diameter

• Dedicated dual ring scope mount compatible with the Ruger 10/22 platform.
• Scope mount installs directly to the Ruger 10/22 receiver via the factory mounting holes and included set screws with no additional hardware required. The mount will not install on platforms other than the Ruger 10/22..
• 1 inch in diameter for precision mounting of standard 1 inch tube rifle scopes.
• Precision machined from 6061 grade aluminum, comparable in weight to most scope rings with the added rigidity of a unified one piece mount design.
• All Monstrum scope mounts and accessories come with a lifetime guarantee.

Monstrum 1-4x20 LPVO Scope with MH255 Offset Scope Mount and Flip Up Lens Covers | Black

• Tactical rifle scope providing crystal clear targeting at 1-4x magnification, with a 20mm objective diameter and an eye relief of 3.5-3.8 Inches.
• Glass rangefinder reticle for on-the-fly range estimation and long distance targeting.
• Lever controlled reticle illumination in both red and green with multiple brightness intensities.
• Product Bundle includes Monstrum H-Series One Piece Offset Scope Mount.
• comparable in weight to a pair of scope rings while maintaining the added rigidity and convenience of a one piece mount.
• Includes hardened steel Torx mounting hardware for mounting to any Picatinny rail platform..
• Product bundle includes a matching set of Monstrum Rubberized Flip Up Lens Covers. Spring loaded flip-up lens covers that rubberized sleeves that conform neatly around your rifle scope tube, protecting your expensive optics from dust and abrasion.

Monstrum 3-9x40 Rifle Scope with AO Adjustable Objective | Ruger 10/22 Edition with Ruger 10/22 Dual Ring Scope Mount

• End-to-end rifle scope solution built exclusively for the Ruger 10/22 platform.
• Adjustable 3-9 times magnification, for targeting out to 500 yards and beyond.
• An adjustable objective lens or AO - that allows for sharper focus of the target image, elimination of parallax, and range estimation.
• Scope mount installs directly to the Ruger 10/22 receiver via the factory mounting holes and included set screws with no additional hardware required.
• Precision scope mount machined from 6061 grade aluminum, comparable in weight to most scope rings with the added rigidity of a unified one piece mount....

Gamo Whisper Silent Cat Air Rifle

Ade Advanced Optics PS002 Cantilever One Piece Riflescope Mount – 1″ inch

• This is a 1″ inch one piece riflescope rings. Mounting rings are pushed forward 2″ for better eye relief..
• ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher.
• Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body..
• The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.
• Height” 1.5″. Weight 6oz. Screw Torque – 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..

Monstrum Stealth 4×30 Fixed Magnification Scope

• Fixed 4x magnification, for targeting out to 300 yards and beyond.
• A new and improved optics assembly, providing a shorter scope with a long eye relief of 6+ inches.
• Aircraft grade 6061 aluminum scope body with a sealed, nitrogen-charged tube for resistance to water and fog.
• Precision 1/4 MOA/click windage and elevation adjustments with locking turrets.
• Package includes a custom one piece offset scope mount for more flexible scope placement.

Ade Advanced Optics PS001C 30mm Offset Cantilever One Piece Rifle Scope Mount

• This is a 30mm one piece riflescope rings. Mounting rings are pushed forward 2" for better eye relief..
• ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher.
• Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body..
• The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.
• Height" 1.5". Weight 6oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..

Monstrum Stealth 3x30 Fixed Magnification Scope

• Fixed 3x magnification, for targeting out to 300 yards and beyond.
• A new and improved optics assembly, providing a shorter scope with a long eye relief of 6+ inches.
• Aircraft grade 6061 aluminum scope body with a sealed, nitrogen-charged tube for resistance to water and fog.
• Precision 1/4 MOA/click windage and elevation adjustments with locking turrets.
• Package includes a custom one piece offset scope mount for more flexible scope placement.

GHHJX Gunsmith Level, Scope Mounting Kit,Professional Magnetic Scope Leveling Tool,Set of 2 (Cylinder)

• The bubble shell is made of acrylic,contains viscous fluid to ensure the tool easy to read..
• The scope mounting kit includes one scope turret level and one gun clamp level.level your scope and rifle at the same time.Leveled rifle + leveled scope = leveled crosshair..
• There are strong magnets in the bottom for easy, hands-free use.Got these levels with their magnetic pad on the bottom and they work great. Use the levels to mount a rifle scope or cant level in a hurry..
• Compact size allows for convenient storage and transport,the small piece 1.5x0.6x0.6inch , the big one 2.2x0.9x0.8inch.
• Designed for Mounting Optics. Essential for making sure your scope and gun are level to each other..

Monstrum Slim Profile Series Offset Scope Mount with Integrated Level Bubble | 30 mm Diameter

• Dual ring scope mount available for standard 1 inch or for 30 mm tube scopes tubes.
• Scope mounts come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
• Mounts to any flat top Picatinny rail equipped rifle platform.
• 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position.
• Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount.