Reviews Oled Module

JM Set of 3 pcs Transparent 3D Floating Frame Display Holder/Box/Frames for Challenge Coins, AA Medallions, Antique, Jewelry,Gift, White, 2.75 x 2.75 x 0.75 Inches

  • What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight.
  • Power-saving display: the I2C oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications) simplifies connections.
  • Please note that these I2C OLED display module comes without pin headers.
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, compatible with Arduino, also compatible with ESP8266, ESP32, STM32, etc..
  • Product manual: as shown in the instructions.
Check Stock

40x4 Character LCD (190x54) FSTN White

  • 【CHANGEABLE IIC ADDRESS】: The built-in standard driver chip SSD 1306 already exists in the libraries of Raspberry Pi and 51 Series,which makes programming very easy. This oled display can be used with different machine easily..
  • 【128 X 64 PIXELS】: With high resolution of 128 x 64 pixels, no need backlight, self-illumination, pixels stand outvery well even in a brighter circumstances like full sunlight..
  • 【COMPATIBLE WITH MANY CONTROL CHIPS】: This oled display can be widely use with 51 series, MSP430 series, STM32/2, CSR IC, etc. 4PCS male pins makes the lightweight connecting easily..
  • 【WIDE FIELD OF CLEAR VIEW】: 0.96inch OLED display module supports 180 degrees of view from up to down and right and left, which is convenient for you to clearly observe the information displayed from different angle..
  • 【EASY TO INSTALL】: With four square holes, our I2C OLED display module can be installed easily, truly convenient to use and simple you working..
Check Stock

5 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module I2C OLED Screen Driver DC 3.3V~5V White Display Color

  • What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight.
  • Power-saving display: the I2C oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications)....
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, compatible with Arduino, also compatible with....
  • Product manual: as shown in the instructions.
Check Stock

LCD Character Display Modules & Accessories FSTN (-) Transm 80.0 x 36.0

  • MAIN FUNCTION: OLED is the newest display technology in market now, it can emitting light by itself, no back-light needed.
  • EASY TO USE: The commands sending to products are easy to remember and understand and with it's four square holes they are easy to install..
  • MORE PRACTICAL: In low ambient light conditions such as a dark room, an OLED screen can achieve a higher contrast ratio than an LCD..
  • FASTER RESPONSE: OLED display module has a much faster response time than an LCD which can improve your using efficiency..
  • MULTIPLE USAGE: The display with small dimension is suitable for MP3, function cellphone, smart health device, etc..
Check Stock

2 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module Blue I2C OLED Screen Driver DC 3.3V - 5V

  • What you will get: you will get 2 OLED display modules with classic display colors, self illumination with no need of backlight.
  • Power-saving display: the I2C OLED display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications)....
  • More details: this I2C LCD display is compatible with Arduino, ESP8266, ESP32, STM32, etc., 3.35V power.
  • Operating temperature: -40 - 85 degree....
  • Good compatibility: this I2C OLED display module is compatible with Raspberry Pi 4B/ 3B+/ 3B/ 2B/ Zero, compatible with Arduino, also compatible with....
  • Product manual: as shown in the instructions.
Check Stock

KEYESTUDIO Basic Starter Kit for Microbit V2 V1.5 (Not Included), with 35 Lessons Tutorial, i2c LCD, 5V Relay, LED Matrix, Breadboard Components Great for Teens Kids STEM Programming

  • The easy plug starter kit v2.0 are designed for STEM education and it allows children to learn programming easily or teachers to bring the detailed lesson plans into their classroom and embed them in their learning system..
  • It contains a control board, 8 piece RJ11 cables, a USB cable, and 25 piece popular and creative sensors and modules like Fan Motor, DS3231 Clock Module, IR Receiver Module, 2812 RGB Module, OLED Module, Ultrasonic Module, PIR Motion Sensor, etc..
  • A big surprise is that there are no complicated jumpers and soldering, they are convenient to connect using the RJ11 interface, and we also provide Mixly graphical programming tutorial..
  • Mixly is a free open-source graphical for Arduino programming software, based on Google’s Blockly graphical programming framework..
  • This programming learning kit includes 22 interesting and instructive tutorials, step by step to familiarize you with electronic modules, exercise your logical thinking and develop your ideas..
Check Stock

SHT31 Temperature & SHT31-D Humidity Sensor Module Breakout Weather for Arduino

  • The ESP8266 Weather Station IoT Starter Kit includes an ESP8266 ESP-12E Development Board, a 0.96" OLED display, a DHT11 Temperature and Humidity....
  • Developer-friendly module ESP8266 come with a USB connector and the maximum number of available pins. ESP8266 full IO mouth leads directly download....
  • The 0.96" 128x64 pixel OLED display supports I2C, wide viewing angle, low power consumption and high response speed.
  • DHT11 Temperature and Humidity Sensor with characteristics humidity measurement range: 20~90% RH, humidity measurement accuracy: +/-5% RH, temperature....
  • Four Projects in One – The ESP8266 and Wireless IoT development lets you 4 home projects, including weather station, plane spotter, world clock and....
Check Stock

SmallRig MagicFIZ Wireless Follow Focus Controller Kit Lens Focus Control with Handgrip Electronic Controller Module and Accessories for DSLR Mirrorless Cine-Style Lenses - 3917

  • ...ndle is compatible with the left and right hand interchangeability to meet the needs of handheld photography..
  • 【OLED Screen】: The ultra-low-power 0.96" OLED screen with RGB lighting effect and vibration warning provides a simple but efficient interaction experience..
  • 【Please Note】: 1.The electronic controller module and matched motor (ID: 3263, not included in the package) can be operated only under the same frequency band and number. 2. A calibration is required when the wireless handwheel controller screen displays abnormal location information.3.Package includes: 1 x Electronic Controller Module, 1 x Wireless Handgrip, 1 x Handgrip Adapter, 1 x USB-C to USB-C Cable..
Check Stock

LCD Display Module,1.8 inch 4-Wire SPI TFT LCD Display Module Driver with PCB 128x160 chip ST7735 51/AVR/STM32/ARM 8/16 bit

  • ★This is 0.96" SSD1306 128X64 OLED LCD Display with I2C IIC SPI Serial module..
  • ★It is OLED display without backlight and it is low power dissipation.High contrast, thus supporting clear display..
  • ★Communication: IIC, only two I / O ports.
  • ★If there is any problem with the product, please do not hesitate to contact us, we will help you solve the problem..
Check Stock

DJI Action 2 Front Touchscreen Module

  • When connected, DJI Action 2 offers dual OLED touchscreens, so you can flexibly switch between screens and effortlessly take perfect selfies. Battery life is increased to a maximum of 160 minutes, and the 4-mic Matrix Stereo, Audio Zoom, and Directional Audio are supported..
  • The Front Touchscreen Module is not waterproof or dustproof and should be used with the Waterproof Case for underwater activities..
Check Stock

Behringer Brains Multi-engine Oscillator Eurorack Module

  • 16HP Eurack Multi-engine Oscillat Module with 20 Synthesis Engines.
Check Stock

GeeekPi Raspberry Pi CM4 Router Board,Raspberry Pi Compute Module 4 Expansion Board Breakout Board Module for Raspberry Pi Compute Module 4 Series

  • CM4 Router Board is an expansion board based on the Raspberry Pi Compute Module 4. It brings Raspberry Pi CM4 two full-speed gigabit network ports and offers better performance, lower CPU usage, and higher stability for a long time work compared with a USB network card..
  • The board still retains the characteristic GPIO pin header of Raspberry Pi, which makes it applicable for connecting other hat board such as Pi hats, sensors, and PoE hat board, and cooling fan, etc..
  • There is also a USB2.0 interface that can be connected to USB flash driver, USB keyboard, printers etc..
  • Besides, there is an OLED(0.91 inch) screen will help you to customize your Router Board's information display style..
  • 1 x 0.91 Inch OLED Display (Pre-installed).
Check Stock

MakerFocus 2pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V for Ar duino

  • ★ ★ Product manual: Please get the link from the product guide below.
  • OLED display, no need backlight, self-illumination, Display Color: Blue. Plz note: These I2C OLED Display Module comes without pin headers.
  • The display performance is better than the traditional LCD display, also lower consumption.
  • IIC (I2C communications) simplifies connections.
  • Use with Ar duino, ESP8266, ESP32, STM32, etc.
  • We have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation.
Check Stock