Reviews Oldsmobile Ls Valve Covers

Tektall LS Cast Aluminum Valve Covers with Coil Mounts Compatible with Che-vy Small Block V8 293 325 346 364 376 427, Black

  • 【Top Quality】 Made of Highly durable Cast Aluminum and it is black anodized. High sealing performance gasket and silicone sealant to stop the oil leak. Precisely engineered make your car run powerfully and stably..
  • 【Fitment】 Valve cover mounts to SMALL BLOCK V8 GEN. III/IV (LS BASED) LS1, LS2, LS3, LS6, and LS7 engines.
  • 【Function】 Cast aluminum valve covers are a great way to improve the look of your LS engine, without any radical changes to its configuration..
  • 【Features】 The cover has an increased height to allow for added valvetrain clearance and features studs for mounting LS coils with 72mm bolt spacing. It also features a baffled stock-style ventilation set-up and finish-matched oil fill cap..
  • 【Notes】 These work with Delco 510C 05-up coils found on the LS2, LS3, LS7 ETC. It also features a baffled stock-style ventilation set-up, mounting hardware, gaskets, and oil fill cap..
Check Stock

Tektall LS Smooth Cast Aluminum Valve Covers with Coil Mounts and Covers Compatible with Che-vy Small Block SB V8 293 325 376 427, Black

  • 【Top Quality】 Made of Highly durable Cast Aluminum . High sealing performance gasket and silicone sealant to stop the oil leak. Precisely engineered make your car run powerfully and stably.
  • 【Fitment】 Compatible with Che-vy Small Block SB V8 293 325 376 427, Black. Accepts Gen 1 (Delco D580) and Gen 5 (Delco D510C/ 81015) LS style ignition coils.Valve Cover Base Mounts to LS1, LS2, LS3, LS6, and LS7 Engines..
  • 【Function】 Cast aluminum valve covers are a great way to improve the look of your LS engine, without any radical changes to its configuration..
  • 【Features】 The base has a tall internal height to allow for added valvetrain clearance and no brackets required. It also features a baffled stock-style ventilation set-up. The coil cover features cut-outs for routing the wiring harness and spark plug wires and comes with a classic, finned top..
  • 【Package Included】 Coil Cover Mounting Hardware, Coil Hardware & Spacers, Low-profile Oil Fill Caps and Valve Cover Gaskets.
Check Stock

COMP Cams 26918-16 Performance Street 1.310\ OD Beehive Spring; 1.800\ Installed Height; 16 Springs

  • Fitment: for GM Ecotec engines in 2.0L, 2.2L, or 2.4L displacements 2000-2010, for GM Ecotec VIN B,D,F,H 2.2L 2000-2009, for GM Ecotec VIN 5,B,P,V 2.4L 2006-2009, for Oldsmobile Alero, for Chevrolet Cavalier, for Pontiac Grand Am, for Saturn L100 L200 L300 LS LS1 LW1 LW200, for Pontiac Sunfire G5 G6, for Chevrolet Cobalt, for Chevrolet HHR, for Chevrolet Malibu, for Lexus Pursuit, for Saturn Sky..
  • Replacement Part Number: 12622329, 12615936. This is vehicle specific product, please make sure your car model and OE number before ordering..
  • Durable Material: Made of stainless steel, durable, solid enough and not easy to deform under pressure..
  • Measure: Intake Tool Head Diameter: 35.1mm / 1.38".
  • Exhaust Tool Head Diameter: 30.1mm / 1.19".
  • Good Performance: Easy installation. It is a good replacement for the old or broken one. Fits for the engine valve well..
Check Stock

A-Team Performance - Fabricated Aluminum Valve Covers with Gasket Coil Mounts - Compatible with GM LSX Black

  • Fabricated Aluminum Valve Covers with Gasket Coil Mounts BLACK.
  • Compatible With — Chevrolet Small Block V8 Gen. III/IV (LS Based) - 4.8 L / 293 in3, 5.3 L / 325 in3, 5.7 L / 346 in3 (commonly referred to as 350), 6.0 L / 364 in3, 6.2 L / 376 in3, and 7.0 L / 427 in3.
  • Fabricated Aluminum — Valve Covers With a Clean and Unique Aesthetic Racing Look From Strong Yet Lightweight 6061-t6 Aluminum.
  • Tall Height — Added Clearance for High-performance Valvetrain Set-ups. Mounting Hardware — Complete Kit Which Includes Everything for Installation in LS Engine Covers.
  • Specifications — Center Bolt Mounting Style, Billet Aluminum Mounting Surface, and One-piece O-ring Gasket Included.
Check Stock

ICT Billet Compatible with LT Gen V Engine to LS Gen III & IV Valve Cover Adapter LT1 LS1 L83 LT4 L86 551326

  • Used to adapt and Compatible with 1999 and newer LS series valve covers to LT series engines.
  • Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum.
  • Includes: 2 adapters, 2 OEM style LT gaskets and mounting hardware.
  • Compatible with 2014 and newer LT series engines.
  • Compatible with LT Gen V engine to LS Gen III & IV valve covers.
Check Stock

OCPTY Intake and Position Actuator Solenoid (VVT) Variable Timing Solenoids Oil Control Replacement Fit for Hyundai Santa FE for 2.4L KIA Optima 2.0L 918022

  • Fitment: for GM Ecotec engines in 2.0L, 2.2L, or 2.4L displacements 2000-2010, for GM Ecotec VIN B,D,F,H 2.2L 2000-2009, for GM Ecotec VIN 5,B,P,V 2.4L 2006-2009, for Oldsmobile Alero, for Chevrolet Cavalier, for Pontiac Grand Am, for Saturn L100 L200 L300 LS LS1 LW1 LW200, for Pontiac Sunfire G5 G6, for Chevrolet Cobalt, for Chevrolet HHR, for Chevrolet Malibu, for Lexus Pursuit, for Saturn Sky..
  • Replacement Part Number: 12622329, 12615936. This is vehicle specific product, please make sure your car model and OE number before ordering..
  • Durable Material: Made of stainless steel, durable, solid enough and not easy to deform under pressure..
  • Measure: Intake Tool Head Diameter: 35.1mm / 1.38".
  • Exhaust Tool Head Diameter: 30.1mm / 1.19".
  • Good Performance: Easy installation. It is a good replacement for the old or broken one. Fits for the engine valve well..
Check Stock

A-Team Performance - GM LS Smooth Cast Aluminum Valve Covers with Coil Mounts and Covers - Compatible with Chevy Small Block SB V8 293 325 376 427 Polished

  • GM LS Smooth Cast Aluminum Valve Covers with Coil Mounts and Covers, Polished.
  • Compatible with Chevy Small Block SB V8 293 325 376 427.
  • Internal and Overall Height: Tall & 4.25". Features provisions for mounting two of the most popular LS coil packs - no brackets required.
  • Baffled Stock-Style Ventilation Set-up. Coil Cover features cut-outs for Routing the Wiring Harness.
  • Accepts Gen 1 (Delco D580) and Gen 5 (Delco D510C/ 81015) LS style ignition coils.
Check Stock

A-Team Performance - GM LS Finned Cast Aluminum Valve Covers with Coil Mounts and Covers - Compatible with Chevy Small Block SB V8 293 325 376 427 Black

  • GM LS Finned Cast Aluminum Valve Covers with Coil Mounts and Covers. Internal and Overall Height: Tall & 4.25".
  • Compatible with Chevy Small Block SB V8 293 325 376 427 Black.
  • Baffled Stock-Style Ventilation Set-up and Features provisions for mounting two of the most popular LS coil packs - no brackets required..
  • Coil Cover features cut-outs for Routing the Wiring Harness.
  • Accepts Gen 1 (Delco D580) and Gen 5 (Delco D510C/ 81015) LS style ignition coils.
Check Stock

COMP Cams 4715 .500 Valve Guide Cutter

  • Cast aluminium 2-Piece LS valve covers designed to mount and hide both Gen I and Gen V style LS coil bodies.
  • Retain the performance of factory coil-on-cover ignition without the unsightly styling.
  • No coil relocation, wire harness extensions, or custom spark plug wires required.
Check Stock

GM Genuine Parts 12690246 Dual Feed Hydraulic Valve Lash Adjuster

  • Cast aluminium 2-Piece LS valve covers designed to mount and hide both Gen I and Gen V style LS coil bodies.
  • Retain the performance of factory coil-on-cover ignition without the unsightly styling.
  • No coil relocation, wire harness extensions, or custom spark plug wires required.
Check Stock

ACDelco GM Original Equipment 12679099 Intake Variable Valve Timing (VVT) Solenoid with Seal, Retainer, and Bolt

  • 【Premium Quality】: Ensun's Engine Valve Lifters automatically help maintain a 'zero' valve lash condition to help prevent valve train noise and unnecessary valve train component wear. Ensun's valve lifters have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors..
  • 【Direct Fit】: Direct replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% tested before shipping；.
  • 【Fitment/Compatibility】: Fit for LS1, LS2, LS3, LS6, LS7, LS9 LSX Engines (4.8L, 5.3L, 5.7L, 6.0L, 6.2L).
  • 【Replacement OEM ( Original Equipment Part) Number】: 12499225, 17122490, 12576400, 12648846, 17109057, 17120090, 17120735, 17121905, 25341990, HL124.
  • 【Buy with Confidence】: Order from Ensun, we offer a 12-Month Warranty, true worry-free shopping experience；.
Check Stock

Aramox Billet Valve Cover, Durable Billet Black Valve Cover Oil Cap for Lexus LS1 / LS6 LS2 / LS3 LS7 AN10

  • Fitment: This Billet Valve Cover is designed to fit for LEXUS LS1 / LS6 LS2 / LS3 LS7..
  • Useful Replacement Tool: This valve cover adapter replaces the original oil fill tube on the factory valve cover..
  • Easy to Install: This Billet Valve Cap is so easy to install and reliable to use..
  • Detailed application of the model, please check carefully before purchase..
  • Premium Quality: The Billet Valve Cap for LEXUS is made of high quality material and durable in use..
Check Stock

NMN Precision NON MDS Lifters Set 53021720AA 53021720AB Replacement for 2003-2018 Chrysler 300 Dodge Ram 1500 Charger Challenger Grand Cherokee 5.7L 6.1L 6.4L HEMI Replace# 5038784AD 5038686AA

  • Engine Valve Lifters Fit for 1999-2002 Camaro and Firebird.
  • 1999-2013 Silverado and Sierra (4.8L, 5.3L, 6.0L). Fits for LS1, LS2, LS3, LS6, LS7, LS9 LSX Engines (4.8L, 5.3L, 5.7L, 6.0L, 6.2L).
  • Hydraulic tappet Replaces OEM #: 12595365 12499225 12551162 12569259.
  • Hydraulic tappet, also called valve lifter or hydraulic lash adjuster, is a device for maintaining zero valve clearance in an internal combustion engine. It helps get rid of the need for combustion engine to have mechanical clearance in the engine's valve train, to keep the valve from being held open and thus destroyed as the valve train goes through its process of thermal expansion. In effect, valve lifter keeps the valve healthy and protects from an engine's normal thermal expansion process.
  • A guide and anti-rotation device for the valve lifter comprises a vertically-disposed leg which seats in a slot formed on the valve lifter and a pair of cylindrically shaped arms, extending horizontally from opposite edges of the leg, which seat in a circumferential groove also formed on the valve lifter. A hook, connected to an uppe....
Check Stock