Reviews Oil Tubing Pipe

Anderson Metals - 50065-08 50065 Brass Compression Tube Fitting 90 Degree Elbow 1/2 x 1/2 Tube OD

  • Three piece construction - nut, sleeve and body..
  • USE WITH COPPER TUBING, BRASS TUBING, ALUMINUM TUBING AND PLASTIC TUBING ONLY. Not for use on pipe..
  • Easy to disassemble no flaring tool required - See chart for Assembly instructions..
  • Primary uses water, gasoline, oil and vacuum lines.
Check Stock

Beduan Pneumatic Tubing Pipe 5/16

  • Wide range for working temperature and pressure.
  • Tubing Pipe Working Temperature: -4℉-176℉（-20℃–80℃),） Stretch Resistance: 400kg/cm2.
  • Tubing Pipe Features: Excellent flexibility, Small bending radius.
  • Excellent chemical properties, Minimal pressure loss.
  • PU Tubing Pipe Material: PU( Poly Urethane ).
  • PU Tubing Pipe Size: 5/16″ (Outer diameter) , 3/16″ (Inner diameter). Package Total Length:39.4 Feet (12meters).
Check Stock

EFIELD 3/8\ - 1\ Pex Pipe and Plastic Pipe Cutter

  • EFIELD Pipe and Plastic cutter has a unique shaped blade which gives piping a Clean Cut, No Burrs.
  • EFIELD Pipe and Plastic cutter Cuts any Size up to 1-Inch (This includes sizes from 1/8"-1").
  • EFIELD Pipe and Plastic cutter has Easy locking handle to safely store Pex Pipe Cutter.
  • EFIELD Pipe and Plastic cutter SHOULD NOT be used to cut: Metal Pipes, Cable Wires, and PVC Tubing.
  • EFIELD Pipe and Plastic Cutter Works with Pex-Tubing and Nylon-Tubing..
Check Stock

Superior Tool 36878 ST-2000 Pipe Cutter-5/8 Inch to 2-1/8 Inch Pipe Cutter , Gray

  • Cuts up to 1” schedule 40 pipe and 2” copper tubing,.
  • Tubing capacity is 5/8" - 2-1/8" and 1" pipe..
  • Tubing cutter wheeled can be replaced with item # 42348.
  • Cuts and deburrs a wide variety of pipe and tubing..
Check Stock

Rapid Repair RP77271 1/8 Inch to 1-5/8 Inch Outside Diameter Pipe and Tubing Reamer, Red (Single Pack)

  • Removes burrs on tubing from 1/8 inch to 1-5/8 inch outside diameter.
  • NOTE FOR USE: Little pressure is needed to deburr smaller pipe and tubing, too much force will cause damage to the pipe or tubing.
Check Stock

Brass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter,1/4\ Tube OD x 1/4\ NPT Male Connector 5pcs (1/4\ OD Compression x 1/4\ NPT Male)

  • Tube OD Compression to NPT tube adapter for converting Standard National Pipe Thread (NPT) pipe to Aluminum, Plastic, and Copper straight compression thread pipe Tubing..
  • Heavy-duty brass construction with rust proof, corrosion resistance, high temperature ductility and low magnetic permeability.
Check Stock

Beduan Pneumatic Tubing Pipe 5/16 OD Clear Air Compressor PU Line Hose Tube for Water Fluid Transfer 12Meter 39.4ft

  • PU Tubing Pipe Material: PU( Poly Urethane ).
  • PU Tubing Pipe Size: 5/16" (Outer diameter) , 3/16" (Inner diameter). Package Total Length:39.4 Feet (12meters).
  • Tubing Pipe Working Temperature: -4℉-176℉（-20℃--80℃),） Stretch Resistance: 400kg/cm2.
  • Tubing Pipe Features: Excellent flexibility, Small bending radius.
  • Wide range for working temperature and pressure.
Check Stock

Tubing Bead Roller Tube Pipe Tubing Beader Tool Intake and Intercooler Piping Fits 5/8″

  • Simply insert the end of the tubing between the dies and start cranking the turning handle.This vise-mounted tool will form a perfect bead on the end of aluminium or copper tubing..
  • Aluminum, steel or stainless steel Intercooler pipe Fits 5/8″ and larger tubing..
  • Aluminum pipe: diameter from 5/8″(16mm) to 4″(102mm),max thickness 3mm.
  • Steel pipe: diameter from 5/8″(16mm) to 4″(102mm),max thickness 1mm.
  • By turning the handle on the side of the tubing beader tool, you can form a desired bead on the end of aluminium or copper tubing..
  • Works best when secured in a vice.Please Note: Always apply the bead before welding..
Check Stock

Beduan Pneumatic Tubing Pipe 3/8\ OD Blue Air Compressor PU Line Hose Tube for Water Fluid Transfer 10Meter 32.8ft

  • PU Tubing Pipe Material: PU( Poly Urethane ).
  • PU Tubing Pipe Size: 3/8" (Outer diameter) , 1/4" (Inner diameter). Package Total Length:32.8 Feet (10meters).
  • Tubing Pipe Working Temperature: -4℉-176℉（-20℃--80℃),） Stretch Resistance: 400kg/cm2.
  • Tubing Pipe Features: Excellent flexibility, Small bending radius.
  • Wide range for working temperature and pressure.
  • Excellent chemical properties, Minimal pressure loss.
Check Stock

Sunpro CP7994 Triple Gauge Kit

  • Blue-line styling with black 2-in face and white digits.
  • Includes gauge, mounting hardware, and 72-in capillary tubing with 5/8-in national pipe thread and 1/4-in, 3/8-in, and 1/2-in adaptors.
  • Monitors battery and charging circuit operation systems.
  • Kit includes an electrical voltmeter, mechanical oil pressure gauge, and mechanical oil/water temperature gauge.
Check Stock

RCB-1625 Replacement Blade for RI-DGID RC-1625 Pipe Cutter Blade, Tubing Cutter and Ratcheting Plastic Pipe 27858 Model - Cutting Pipes 1/8-inch to 1-5/8-inch O.D. (2 Pack)

  • ▶Replacement Blade◀ Compaitble With RI-DGID RC-1625 Ratcheting Plastic Pipe and Tubing Cutter, for Ri-dgid 27858 RCB-1625 replacement blade is made to be used with The Ri-dgid 23498 ratchet action plastic pipe & tubing cutter..
  • ▶ Easy installation:◀ Since the blade is fixed with screws, the package includes 2 replacement blades and 2 screws for installation and fixing, which is convenient to install and replace the old blade..
  • ▶ Wide range of applications:◀ This is a replacement blade for ratchet pipe cutters, suitable for cutting most plastic pipes (PPVC, CPVC, PP-R, PEX, PE, rubber hose, etc and multilayer tubing Replacement blade only..
  • ▶with for:◀ This replacement pipe cutter blade for the RC-1625 Ratchet Cutter is ideal for pipe 1/8-inch to 1-5/8-inch O.D and multilayer tubing. The premium blade design combined with the pipe cutter's ratchet mechanism reduces the hand force required to cut hard plastic materials.
  • ▶Note:◀ To avoid machines that are not suitable for you, please check the user manual to check your model, if you have any questions in use, please contact us in time, we will reply you within 24 hours..
Check Stock

SharkBite 1 Inch x 300 Feet White PEX-B, PEX Pipe Flexible Water Tubing for Plumbing, U880W300

  • SHARKBITE WHITE PEX-B PIPE: This SharkBite white PEX-B pipe is available in coils up to 1,000 feet in length, allowing longer runs and fewer connections to save time, money, and potential leak points.
  • FREEZE RESISTANT: This flexible PEX tubing expands and contracts as water freezes and thaws within the pipe.
  • ideal for hot and cold potable water distribution, fire protection, and municipal water service lines.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass PEX water tubing offers faster installation compared to rigid pipe, six-month UV resistance, and the highest-rated chlorine resistance.
  • PREFERRED BY THE PRO: This portable PEX pipe is certified to meet ASTM F2023 oxidative-resistance requirements for continuous hot water recirculation.
  • approved for water service lines and burial applications including being buried under concrete.
  • SPECS: SharkBite water pipe tubing features a minimum working temperature of 33 degrees F at 160 PSI, a maximum working temperature of 200 degrees F at 80 PSI, and a maximum working pressure of 160 PSI at 33 to 70 degrees F.
Check Stock

Mophorn Hydraulic Flaring Tool Kit with Tube Cutter Flare Tool Kit Deburrer Fuel Line 8PCS Swage Adapter Flaring Tool Kit for 3/16 to 7/8 Inch

  • Pipe Cutting & Deburring: This flaring tool comes with one pipe cutter and one deburring tool, both of which are easy to use with the handwheel design. The pipe cutter cuts the pipes quickly with a solid and sharp blade. The deburring tool is used for cleaning the interior and exterior of tubing..
  • Durability & Portability: The flaring tool is made of durable hardened steel, which is reliable and built to last, saving your money. Besides, the flaring tool kit is stored in a plastic toolbox that is not easily broken, reducing the possibility of missing parts. It is compact and easy to carry..
  • Wide Application: This hydraulic flaring tool kit is suitable for expanding and flaring soft metal tubing and piping, such as copper and aluminum pipes. It is a great tool for repairs on vehicles or making lines off a vehicle, suitable for the refrigeration and air conditioning industry..
Check Stock