Reviews Oil Tube Socket

VEVOR Commercial Electric Deep Fryer 24L Large Capacity Electric Countertop Fryer w/Dual Removable Basket 3000W Stainless Steel Dual Deep Fryer for Kitchen Restaurant and Commercial Use Silver

  • ...lis, concession stands, snack bars, and parties..
  • Quick and Crispy: Say goodbye to slow heat-ups! Each tank of this commercial electric fryer features a 1500-watt heating element that quickly heats the oil to your desired temperature. This means you can cook you food quickly and thoroughly. NOTE: Please use separate socket plates for each plug to minimize power loss risk, and please plug into a wall socket rather than a wiring plate-type socket..
  • Adjustable Heat Settings: You’re in charge with the independent thermostatic control on each tank. Easily adjust the temperature from 122°F to 392°F (50-200°C), and get ready to bring on the heat! Also a thermal shutdown mechanism is equipped to automatically cut off the power if the oil reaches a temperature of 446°F/230°C..
  • Easy and Simple Cleanup: All components of this fryer are easy to lift out, including the oil tanks. What’s more, the stainless steel exterior is a breeze to wipe down..
  • Designed for Your Convenience: A coated, cool-touch handle ensures comfortable use, while the well-matched cover minimizes hot oil splashes. The guard plate lying above the heating tube catches excess food crumbs. And the front hook makes it easy to hang the fry basket for quick oil drainage..
Check Stock

WYNNsky Oxygen Sensor Remover Set, Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set, 7 Pieces O2 Sensor Socket Set

  • Application: This socket set is designed for the removal inspection or replacement of heated and non-heated oxygen sensors fitted to the following vehicle Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda. These sockets feature cut-away sections allow some sockets to fit over wiring harnesses, complete with the black phosphate finish for a durable design..
  • 3/8’’ Drive × 7/8’’ ×1/2’’ Oxygen Sensor Socket/Vacuum Switch Socket removes and installs vacuum switch with a 7/8’’ hex and some oxygen sensors.
  • 3/8’’ Drive × 7/8’’ × 3-1/8‘’ oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles. Slot in socket for wire clearance..
  • 1/2’’ Drive ×1-3/16’’ ×3-1/2’’ vacuum switch socket removes oil pressure sending units on late 80’s to mid 90’s GM models.
  • 1/2’’ Drive ×1-1/16’’ × 3-1/4’’ thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles.
  • 3/8’’ Drive ×1’’ and 1-1/16’’ ×3’’ remove oil pressure sending units. Deep design fits switches up to 2-5/8’’..
  • 1/2’’ drive ×7/8’’ ×2’’ heated oxygen sensor sockets slot in socket accommodates connectors on heated oxygen sensors.
Check Stock

GEARWRENCH 8 Pc. Sensor and Sending Socket Set - 41720

  • Designed for the removal and installation of oxygen sensors, oil pressure sending units, and vacuum switches.
  • Includes 3/8" drive 7/8" slotted socket for PVS, TVS and O2 sending units.
  • Includes 3/8" Drive 7/8" (22mm) socket for Oxygen Sensor Units.
  • Includes 3/8" Drive 1-1/16" Deep socket for Oil Pressure Sending units.
  • Includes 3/8" Drive 7/8" (22mm) Low Profile Offset socket for O2 Sensor Unit.
  • Includes 1/2" Drive 1-13/16" socket for Oil Sending Unit.
  • Includes 1/2" Drive 1-1/16" socket for Thermal Sensor units.
  • Durable blow mold case for safe storage and tool retention.
Check Stock

6602 Differential Deflecting Bearing Preload Wrench fit for Chrysler/Dodge Vehicles Axle Tube Quick Delivery Equipment Hand Tools

  • Fit for: Works on Chrysler/Dodge vehicles with 7-1/4, 8-1/4, 8-3/4, and 9-1/4 rear axles.
  • This tool is able to loosen the differential bearing adjusters inside the housing through the axle tube ( you need to use with socket).
  • Made of standard No.1045 steel with high strength and toughness for durability and perfect match.
  • It will perfectly fit inside axle tube to access the threaded adjusters with sleek design, and there is about 6″ of heat shrink on the wrench-end which protects the oil seal and wheel bearing from damage when using.
  • Package included: 1pcs Differential Bearing Preload Wrench ( 2 year warranty).
Check Stock

Tyfrozn (20Pcs) Oil Drain Plug Gaskets fit for Toyota Lexus Scion Crush Washer Seals Replaces# 9043012031

  • NO TOOLS, NO MESS, FAST DRAIN. Quit searching for that misplaced socket or ratchet. Eliminate stripped oil pans. No more mopping up messes. Drain oil in 10 minutes or less with the Quick Twist Oil Valve from ValvoMax. Follow an EASY 3-step process: remove cap, insert drain tool, watch the oil drain! It's so easy, anyone could do it..
  • 100% STAINLESS CONSTRUCTION. Constructed of ROCK SOLID 304 Stainless Steel, the valve is sure to outlast any vehicle. Includes a STEEL CAP with a rubber seal inside for added protection against leaks. Nothing comes close to the durability offered. Material you can TRUST!.
  • WAVE SPRING TECHNOLOGY. SAVE TIME with FAST oil changes. By using a proprietary wave spring, the oil is able to travel quickly! Use a ValvoMax Drain Bag (sold separately) for added convenience of disposal. Get back to doing what matters most..
  • DRAIN OIL WITH EASE. Includes EZ Drain Tool with ergonomic hand grip for easy oil changing. The actuator pushes upward on a steel ball to release the flow of oil. Oil drains through the attached tube into your container! A simple twist of the wrist begins oil flowing. Drain oil HOT for faster changes..
  • ONE-TIME INSTALLATION. Install it once and forget about it. Discover the EASE of simpler oil changes and make messes ....
Check Stock

X AUTOHAUX 15pcs M20 Silver Tone Oil Drain Plug Gasket Replacement for Subaru 11126AA000

  • NO TOOLS, NO MESS, FAST DRAIN. Quit searching for that misplaced socket or ratchet. Eliminate stripped oil pans. No more mopping up messes. Drain oil in 10 minutes or less with the Quick Twist Oil Valve from ValvoMax. Follow an EASY 3-step process: remove cap, insert drain tool, watch the oil drain! It's so easy, anyone could do it..
  • 100% STAINLESS CONSTRUCTION. Constructed of ROCK SOLID 304 Stainless Steel, the valve is sure to outlast any vehicle. Includes a STEEL CAP with a rubber seal inside for added protection against leaks. Nothing comes close to the durability offered. Material you can TRUST!.
  • WAVE SPRING TECHNOLOGY. SAVE TIME with FAST oil changes. By using a proprietary wave spring, the oil is able to travel quickly! Use a ValvoMax Drain Bag (sold separately) for added convenience of disposal. Get back to doing what matters most..
  • DRAIN OIL WITH EASE. Includes EZ Drain Tool with ergonomic hand grip for easy oil changing. The actuator pushes upward on a steel ball to release the flow of oil. Oil drains through the attached tube into your container! A simple twist of the wrist begins oil flowing. Drain oil HOT for faster changes..
  • ONE-TIME INSTALLATION. Install it once and forget about it. Discover the EASE of simpler oil changes and make messes ....
Check Stock

ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8in), 27mm, 29mm – All Vehicle O2 Removal and Installation

  • NO MORE HASSLE: The ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8” Inches), 27mm, 29mm – All Vehicle O2 Removal and Installation is for inspection, removal, and installation of hard-to-reach oxygen sensors, oil pressure switches, oil pressure sending units, thermal sensor switches, vacuum switches, and brake light switches.
  • Each socket is permanently etched with size marking for your convenience.
  • MATCHES YOUR CAR: Universal fit for Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda, Vauxhall/Open (GM), and Volkswagen.
  • Sizes include 22mm (7/8”), 27mm, and 29mm.
  • For both heated and non-heated oxygen sensors.
  • Compatible with 3/8-inch and 1/2-inch ratchet drivers or extensions.
  • Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires.
  • BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) for extra strength and longevity.
  • Tools have a light coating of oil to protect them from rusting.
  • EASY STORAGE: Heavy-duty 9” x 2.25” x 8” inch (22.9cm x 5.7cm x 20.3cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes (1) 29mm pressure/vacuum switch 6pt socket + (1) 22mm (7/8 inch) vacuum switch 6pt socket + (1) 22mm (7/8 inch) v....
Check Stock

Centrifuge Tube Rack for 10ml/15ml/50ml Laboratory Plastic Tube Rack Holder(Pack of one) (Blue) (50 Wells)

  • Fit for 10ml, 15ml, 50ml centrifuge tubes.
  • The centrifuge tube rack can be disassembled and easily assembled. The centrifuge tube rack after assembly has two layers.
  • Dimension:20.6cm*17cm*6cm. The max Socket Diameter: 3cm(Fit for 50ml centrifuge tubes). The mini Socket Diameter: 1.7cm(Fit for 10ml,15ml centrifuge tubes.
Check Stock

Moser 1877 Kuno Professional premium Cord/Cordless Hair Clipper 1887-0050

  • DIAMOND BLADE: Innovative carbon-coated blade set for better cutting performance. 40 x more resistant than our standard cutting heads! Completely stainless and washable under water!.
  • PROFESSIONAL: Cord/cordless operation, 80 minutes super quick charge, highly efficient and durable Li-lon-batteries without memory effect. Up to 120 minutes battery operating time..
  • ERGONOMIC: Super light and quiet. Only 120 g. One piece tube housing for extended comfort..
  • SPEED PERFORMANCE: 3 speed levels for each requirement..
  • INCLUSIVE: 1 variable attachment comb 3-6, charging stand, energy-efficient plug-in transformer EU Socket + EU to US Plug Converter, cleaning brush, clipper oil..
Check Stock

ATLIN 36mm Oil Filter Socket - Fits Some Ford F250, BMW, Mini, Volvo, Audi, VW, Porsche Vehicles

  • Compatibility – This low profile oil filter socket is designed to fit vehicles equipped with a cartridge style oil filter housing. Compatible vehicles Include: Ford F250 6.0, F250 6.4, various BMW, Mini, Volvo, Audi, VW, Porsche vehicles. Also can function as a fuel filter socket, compatible with some Duramax engines.
  • Low Profile For Confined Spaces – Fuel filter and oil filter caps are often located in areas with little clearance. Designed with a height of just 1.25”, the ATLIN oil filter wrench effortlessly reaches oil filter cartridges on even the most compact of vehicles.
  • Superior Design – The 6-point hex features rounded corners to prevent rounding-off the filter canister. This design allows the 36mm wrench to grip the filter cartridge tightly with the 6 flat sides instead of the corners, preventing binding and resulting in a more secure fit.
  • Built To Last – The ATLIN oil filter cap wrench is crafted from solid chrome-vanadium (CR-V) steel. This 36mm oil filter socket will not yield under high torque applications like a cheaper cast aluminum 36mm socket.
  • Size & Materials – 3/8-inch drive, 6-point hex, 36-millimeter, CR-V steel.
Check Stock

8MILELAKE 23PC Oil Filter Removal Cap Wrench Garage Socket Set Automotive Removal Garage Tool

  • [APPLICATION]: This 23pcs oil filter removal cap can be used to change your oil and oil filter, it's designed to grip like socket reducing the possibility of crushing filter..
  • [ALL IN ONE SET]: This oil filter wrenches socket set includes 21pcs oil filter cups, 1pc ratchet, and 1pc ring spanner. it offers a wide array of size to fit for most of vehicles..
  • [MATERIAL]: This oil kit is constructed of heat treated steel, designed for strength, durability and longevity, anti rust and oxidatio, not easy to break..
  • [FEATURE]: This Oil Filter Cap Wrench Socket set is collected with a plastic carry case, easy to take and avoid lossing parts. and the specifications of cups have been clearly marked for easy identify and use..
Check Stock

5PCS Oxygen O2 Sensor Socket Wrench 22mm Removal Tool Thread Chaser Set

  • 【WHAT YOU GET】 1PC 1/2'' Drive x 27mm oil pressure sending unit socket. 1PC 1/2'' Drive x 29mm pressure/vacuum switch socket with slot. 1PC 1/2'' Drive x 7/8'' long sensor wrench socket with slot. 1PC 3/8'' Drive x 7/8'' vacuum switch socket with slot. 1PC 3/8'' Drive x7/8'' (6 point) vacuum switch socket with slot. 1PC 3/8'' Drive x 1-1/16'' & 1'' (6 point) oil pressure sending unit socket. 1PC 3/8'' DR x 7/8'' (6 point) short sensor wrench socket with slot..
  • 【FUNCTION】 Designed for the removal and installation of sensors, oil pressure sending units and vacuum switches equipped with wires or vacuum tubes on most vehicles. Provide additional leverage even in hard-to-reach places. We offers premium after-sales service and technical support to each customer..
  • 【FEATURES】 Constructed of high performance chrome vanadium for strength and durability. Finished with Black Oxide to avoid rust. Side cutout design allows easy access to from section and avoids from damage to wire..
  • 【PLUG AND PLAY】 Universal 6-point 7/8” (22mm) socket opening fits all hexagon sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar..
  • 【1 YEAR WARRANTY】 We provide 1 year warranty, support replace, return and refund service. We will random....
Check Stock

Driak Acrylic Clear Test Tube 12 Sockets Centrifuge Tube Rack Holder for 10ML Test Tubes

  • designed with 12 sockets, two layers, each socket is 17mm diameter..
  • Made of high quality plastic PMMA material in clear color.
  • Overall Size (Approx):15x 7x 5cm/ 6" x 2.7" x 3" (L*W*H).
Check Stock