Reviews Oil Sight Gauge

PneumaticPlus SAU2000M-N02DG-MEP Mini Three-Unit Combo Compressed Air Filter Regulator Lubricator FRL, Air Preparation Unit 1/4\ NPT - Metal Bowl, Auto Drain, Gauge

  • HEAVY DUTY 1/2" COMBINATION FILTER-REGULATOR-LUBRICATOR. PLEASE NOTE: 1/2" NPT MEASURES 0.850" OUTSIDE THREAD DIAMETER..
  • COMES EQUIPPED WITH WALL MOUNTING BRACKET AND BACK MOUNT PRESSURE GAUGE..
  • FILTER: 250 PSI MAX - 5 MICRON FILTER - 5oz METAL BOWL CAPACITY AND VISUAL SIGHT GLASS..
  • REGULATOR: 7 - 225 ADJUSTMENT PRESSURE - 250 PSI MAX..
  • LUBRICATOR:OIL FILL ADJUSTMENT TO REGULATE OIL FLOW - 5.1oz OIL CAPASITY AND VISIBLE SIGHT GLASS..
Check Stock

BACOENG Vacuum Pump & Manifold Gauge Set - HVAC A/C Refrigeration Kit - Diagnostic R12 R22 R134a R410A - w/Case

  • Gauge Set — 2 Valve Manifolds with Sight-glass & 1/4″ SAE fittings anodized aluminum block body, oversized sight-glass for easy viewing the refrigerant flow high quality gauge and high accuracy of reading.
  • Vacuum Pump – Newly Designed Compact Vacuum Pump, Portable and Stronger. Flow rate: 3.6CFM Power: 1/4HP Ultimate Vacuum: 0.8Pa.
  • Accessory–3 × 4FT Blue Red Yellow Refrigrant Hose,2 × 1/4″ SAE Male to 5/16″ SAE Female Adapters（R410a）, 1 × Toolkit, 12oz Vacuum Oil, 1 × Manual for Pump and Gauge.
  • Hose– All hose are complied with SAE-J2196 standard standard. Hose Working pressure: 800PSI-4000PSI Acceptable refrigerant: CFC HCFC and HFC.
  • 【Attention】- Ideal for R12 R22 R410A R407C. NEED additional high & low pressure side quick couplers B085XHTS1W if you need to repair R134a vehicle A/C system..
Check Stock

uxcell G3/4 25.7mm Male Thread Air Compressor Fittings Clear Plastic Oil Sight Glass

  • Thread Type : G3/4 (tested by G3/4 thread gauge exactly).
  • if you check by the caliper, the thread outside diameter approx 25.7mm.
  • Overall Size : 38 x 22mm/ 1.5" x 0.87" (D*T).
  • Package Content : 1 x Oil Level Sight Glass.
  • Notice Kindly: The male thread is G3/4 NOT G1, Please check the thread type and size carefully before you ordering.
  • If you need smaller size thread outside diameter about 3/4"（19.05mm), Pls choose our another model G1/2 products, the G1/2 male thread outside diameter is about 20.8mm(approx 3/4").
Check Stock

NewPosition 4CFM 1/3HP Air Vacuum Pump HVAC A/C Refrigeration Tool Kit AC with Leak Detector, Auto Repair Equipment, Manifold Gauge Set(R134A R22), 3 Hoses, Ideal for Food Packaging,Milking,Medical et

  • ✅【Simple But Professional】New Position Powerful HVAC refrigeration kit,4CFM、1/3 HP、single-stage rotary air vacuum pump,low noise with internal high volume cooling fan for extended use..
  • ✅【Heavy Duty Vacuum Pump】Stable copper motor enables stable operation,die-cast aluminum alloy casing keep lightweight and durable,Equipped with brass fitting tethered safety caps to prevent oil leaks during transportation and handling..
  • ✅【HVAC Gauge Reading】The New Position HVAC service gauge set is great for diagnosing and repairing AC systems. Ideal use for R12, R22, R134a..
  • ✅【Easy Oil Change】The vacuum pump features a simple Oil Fill Port for a clean pour and Oil Drain Plug positioned beneath the oil reservoir to quickly drain when needed. Checking the oil sight glass will help to ensure the proper level of oil..
  • ✅【What You Get】Multicolored set of three hoses, Manifold Gauge Set measures the pressure of refrigeration system at different stages,Storage Bag to keep equipment clean and dust free..
Check Stock

Goplus 1/3HP 4CFM Single Stage Rotary Vane Vacuum Pump and R134a Manifold Gauge Set, HVAC A/C Refrigeration Kit, Including Vacuum Pump, A Bottle of Vacuum Pump Oil, Suitable for R12, R22, R134

  • ...y. This AC system requires 500 microns ultimate vacuum delivering better than 150 microns to meet your vacuum requirements..
  • 【Multifunction Manifold Gauge】The HVAC service gauge set is excellent for diagnosing and repairing AC systems. The manifold comes with oversized sight-glass for easy viewing the refrigerant flow, and the high-quality gauge ensures high accuracy of the reading. It’s ideal for R12, R22, R134, and could be suitable for R410a after configuring the adapters. It does not include the adapter, but you can easily buy it locally or on Amazon..
  • 【Three-Color Coded Hoses】There are yellow, blue, and red hoses, each equipped with brass fittings. The fittings are 45 degrees on one hand and straight on the other, providing a leak-proof seal. The three hoses are 36" in length. All hoses comply with the SAE-J2196 standard. The working pressure of the hoses is 800PSI - 4000PSI and its acceptable refrigerant are CFC, HCFC, and HFC..
  • 【A Complete Refrigerant Tool Kit】This tool kit is a complete set for Mini-split/ HVAC and AUTO AC refrigerant recharging, including a vacuum pump, a pressure gauge set, 3 mu....
Check Stock

Laser Bore Sight, 12 Gauge Shot Gun Red Dot Boresighter with 6 Batteries（2 Set Batteries）

  • Class IIIA laser, less than 5mW. Made to fit the 12 Gauge laser bore sight..
  • The laser bore sight is easy to use, can fast gun zeroing and sighting..
  • The bore sight made of sturdy brass construction, the boresighter is high quality..
  • The laser sight is easy to sit perfectly in the bore, reduce cartridges and shells wasted..
  • We provide with 2 sets (6 total) batteries for the 12 Gauge laser bore sight. Battery type is LR44/AG13..
Check Stock

Parker L606-08W/M8 Lubricator, Zinc Bowl with Sight Gauge, Manual Drain, 350 scfm, 1\ NPT

  • Lubricator for pneumatic systems for proportional oil delivery over a wide range of air flows.
  • Precision needle valve for adjustment of delivery rate.
  • Metal bowl with sight gauge for checking fluid level.
  • High-flow port for a flow rate up to 350 scfm.
Check Stock

EXELAIR by Milton FRL Air Filter Regulator and Lubricator System - 1/2 NPT - Metal Bowl Automatic Float EX45FRL40A-04M

  • FRL Air Filter Regulator Lubricator System: Removes water/particles, protects air tools, prevents overdrying tools. Provides adjustable pressure, continuous oil supply, and extended air tool life..
  • Cast aluminum body. Locking adjustable pressure knob. Dial pressure gauge. Rotating flow dial. Easy-access oil fill cap. Automatic/Manual full-time fluid drain. Push-to-connect drain tubing connection to channel water safely..
  • Metal Bowl w/Sight Glass: Indicates fluid level. Filter Bowl Capacity: 7.4 OZ. Lubricator Bowl Capacity: 4.56 OZ..
  • 1/2" inch national pipe threads on both inlet/outlet. Dial gauge scale range: (0 to 160 PSI, 0 to 1.1 MPa). Adjustment range: 5-120 PSI..
  • Max Air Flow: 140 CFM. Max operating pressure: 145 PSI. Temperature range between 25°F and 140°F or -5°C and 60°C..
Check Stock

ATD Tools 7888 5-Stage Desiccant Air Drying System

  • Stage 2 - .01 micron oil removing filter.
  • Stage 3 - 1 gallon desiccant dryer metal bowl with sight glass.
Check Stock

DeWalt DXCMV5076055 60 gallon 5 hp Two Stage Air Compressor

  • Industrial performance delivers maximum CFM @ 175 PSI.
  • provides enough power to operate more than one air tool or Device at one time.
  • Patented Pump design provides for a cooler Running Pump: industrial style air intake filter.
  • easily Accessible Oil level sight glass and Oil drain with 4” extension.
  • Electric motor with Thermal Overload protection: protects the motor from voltage fluctuations and magnetic starter not required.
  • Large capacity, 60 gallon ASME* air receiver with large ¾” air outlet port.Amperage:22 amps.
  • Equipped with Tank pressure gauge and on/off switch and wire form belt guard improves Compressor cooling.
Check Stock

NorTrac Steel Hydraulic Fluid Reservoir - 3-Gal. Capacity

  • Sight level fluid gauge with thermometer allows you to monitor fluid levels and temperature of hydraulic fluid.
  • Magnetic drain plug and threaded breather cap with 40 micron filter help to prevent oil contamination, which can lengthen the life of your hydraulic equipment.
  • Sturdy welded-on 2in. o.c. mounting brackets with 4-bolt mount.
  • Can be used with compatible suction strainer Item# 778644 (sold separately).
Check Stock

NorTrac Steel Hydraulic Fluid Reservoir - 5-Gal. Capacity

  • Sight level fluid gauge with thermometer allows you to monitor fluid level and temperature of hydraulic fluid.
  • Magnetic drain plug and threaded breather cap with 40 micron filter help to prevent oil contamination, which can lengthen the life of your hydraulic equipment.
  • Sturdy welded-on 2in. o.c. mounting brackets with 4-bolt mount.
  • Can be used with compatible suction strainer Item# 778644 (sold separately).
Check Stock

JohnDow Industries JDI-6EV 6 Gallon Fluid Evacuator

  • Powerful venturi vacuum system & Easy-to-read vacuum gauge.
  • Sight tube for quick indication of fluid level.
  • Six suction probes for most applications.
  • Convenient storage tube for suction probes.
  • Oil- and chemical-resistant wheels and casters for increased longevity.
  • Self-evacuating with 10′ quick disconnect evacuation hose.
Check Stock