Reviews Oil Retainer

HONEYWELL 7506N95 Respiratory Protection Filter - North N95 NIOSH Prefilter {10 Pack}

  • NIOSH N95 FILTER: N95 Non-Oil Particulate Filter (95% minimum filter efficiency) for non-oil based aerosol particulates.
  • FITS NORTH BY HONEYWELL N SERIES CARTRIDGES: Designed to fit on all North by Honeywell N series cartridges.
  • When used with North by Honeywell cartridges, requires filter retainer item# N750036.
  • When used directly on North by Honeywell facepiece, requires Filter retainer assembly item# N750037.
Check Stock

3M Respirator Filter Replacement 5P71-6, 6/Pack, P95, Must Be Used with 3M 5000 Respirators or 3M Cartridges 6000 Series

  • MUST BE USED WITH 3M 5000 Series Respirators or 3M Cartridges 6000 Series gas and vapor cartridges (also with 3M 501 Retainer when particles are also present)..
  • NIOSH APPROVED for environments containing certain oil and non-oil-based particles. Rated P95 filtering at least 95% of airborne particles and is strongly resistant to oil..
  • REDUCE EXPOSURE TO PARTICULATES when used on top of 3M 603 Filter Holder and 3M 501 Retainer. Solids such as those from processing minerals, coal, iron ore, cotton, flour, and certain other substances.
  • REDUCE EXPOSURE TO METAL FUMES produced from welding, brazing, cutting, and other operations involving heating of metals..
  • REDUCE EXPOSURE TO LIQUIDS OR OIL-BASED PARTICLES from sprays that do not emit harmful vapors..
Check Stock

ICI T&G 3 Pieces DIN Rail Slotted Aluminum RoHS 5\ Inches Long 35mm Wide 7.5mm High

  • 【APPLICATION】This linear rail and block are small in size and lightweight, especially suitable for small equipments..
  • 【STRENGTH & ACCURACY】Adopting 4-point contact design, it can bear load from every direction, and has good strength and high accuracy..
  • 【GOOD RETAINER】Designed with ball retainer, which allows interchangeability in the case of small precision..
  • 【SMOOTHLY USE】Block has lubrication system.
  • lubrication oil can be easily put into the oil inlet on the side..
  • 【VARIETY LENGTH】This rail set is made of high quality bearing steel which is sturdy and has a long service life, 4 size for you to choose, can meet your different needs..
Check Stock

Kemimoto ATV Fuel Gauge Meter Compatible with Yamaha Gas Gauge Grizzly 600, Big Bear, Kodiak 400 Gas Tank Fuel Cap Replacement # 4SH-24260-11-00, 4SH-24261-00-00, 5GH-24260-11-00, 5GH-24260-10-00

  • ...TV Fuel Gauge Meter can measure the amount of remaining oil in real time. With its help, you can monitor the oil volume in a convienent and accurate way, avoiding falling into the insufficient oil quantity trouble cause miscalculate the oil volume outdoors..
  • Kemimoto Fuel Gauge Meter is designed with rubber seal and retainer. The seal precisely fit with the fuel tank port, preventing oil and smell leaking. The retainer tightly cover the ATV meter to make sure it won’t come loose. No oil leaking or unpleasant smells from your fuel tank destroy your good mood on journey anymore..
  • Kemimoto Gauge Meter is made of gasoline-friendly steel. It won’t pollute your oil. Moreover, the meter has heat resistance. Even working in high temperature environment for a long time, it still can maintain great performance. We believe that both performance and quality are indispensable. We spare no effort to making every money you spend on our products worthwhile..
  • Kemimoto ATV Fuel Gauge Meter is compatible with: 2000- 2012 BIG BEAR 400.
  • 1998 -2001 GRIZZLY 600. Replace OEM PART: 4SH-24260-11-00 4SH-24261-00-00 4SH-24260-00-00 4SH-24260-01-00 4SH-24260-10-00. Please check the Description for more suitable models..
Check Stock

3M 7093 P100 HEPA Particle Filter 4/PK (2 pair)

  • 【Matching Products】 2097 p100 filter retainer used with 6000/7000/ FF-400 series Retainer, can not be used alone. Please confirm this is the model you need before placing an order..
  • 【Material】High Electrostatic Filter Material, Non-woven fabric, Meltblown fabric, hot air cotton.as at least a 95% filtration efficiency,Recommended for use in environments containing certain non oil-based particles..
  • 【Warm Attention】 The product cannot produce oxygen, please do not use it when the oxygen concentration is lower than 19.5%..
  • 【Replacement time】When the filter cotton is dirty, damaged, and the breathing resistance increases significantly, please replace the filter cotton..
  • 【 Good Service】We always provide satisfactory after-sales service at the first time,Please don’t hesitate to contact us when you have any problem..
Check Stock

3M 5P71PB1 6000 Series Particulate Filter P95, 10-Pack

  • NIOSH-APPROVED P95 filters for at least 95% filtration efficiency against solids and liquid aerosols, as well as oil-based particulates.
  • OIL PROOF (Use according to manufacturer's time use restrictions when oil aerosols are present).
  • Attaches to 3M 5000 series respirators and 3M 6000 series cartridges with 3M 501 Reusable Retainer.
  • HELPS REDUCE EXPOSURE to certain particles from paint spraying*, spray adhesives and pesticides**.
Check Stock

Linear Rail SBR12-1200mm Linear Rail Guide CNC Parts, 59inch Fully Supported Linear Rail+2pcs SBR12UU BlockBearing Block Bearing for DIY CNC Routers Lathes Mills Automated Machines

  • 【wide application】This linear rail and block are small and lightweight, suit for small equipment. Especially suit for automatic equipment, precision measuring equipment, and many other machines that need precision linear movement..
  • 【good strength and high accuracy.】This linear rail set adopted 4-point contact design, it can bear load from every direction, and has good strength and high accuracy..
  • 【ball retainer】This linear motion guides designed with ball retainer, which allows interchangeability in the case of small precision..
  • 【block has lubrication system】Block has lubrication system.
  • lubrication oil can be easily put into the oil inlet on the side, will work smoothly..
  • 【variety size and high quality 】This rail set is made of high quality bearing steel which is sturdy and has a long service life, 5 size for you to choose, can meet your different needs..
Check Stock

Rexka 20pcs 10mm Hole Bumper Engine Cover Fender & Grille Clips Compatible with Subaru 909140007 Baja Forester Impreza Legacy Outback Tribeca 2011-2000

  • Other Names:Under Cover Clip, Grille Clip, Fender Liner Clip, Splash Shield Clip, Fender Liner Retainer Clip, Lower Cover Clip, Sight Shield Clip, Cover Clip, Reinforced Beam Clip, Side Cover Clip, Bumper Cover Retainer Clip, Lower Bracket Retainer Clip, Fender Liner Retainer, Suspension Cross-Member Clip, Wheelhouse Liner Retainer, Grille Assembly Clip, Plate Clip, Pad Clip, Bumper Cover Fastener, Reinforcement Fastener, Guide Clip, Side Retainer Rivet, Upper Quarter Trim Fastener..
  • Upper Seal Clip, Corner Support Clip, Protector Clip, Under Cover Retainer Clip, Upper Bracket Clip, Grille Bracket Clip, Lower Bracket Clip, Retainer Plate Clip, Upper Plate Clip, Bracket Clip, Fog Lamp Assembly Clip, Side Bracket Retainer Clip, Upper Cover Retainer Clip, Cover Plate Clip, Hole Cover Clip, Pillar Trim Clip, Closure Panel Clip, Spoiler Clip, Protect Shield Clip, Backup Lamp Clip, Duct Clip, Outer Cover Clip, Bumper Cover Retainer, Bumper Cover Side Bracket.
  • Replaces Subaru: 90914-0007 Fits: Subaru: Ascent, B9 Tribeca, Baja, BRZ, Crosstrek, Forester, Impreza, Legacy, Outback, Tribeca, WRX, WRX STI, XV Crosstrek.
  • Head Diameter: 21mm Stem Length: 15mm Fits Into 10mm Hole.
  • This is the most common Clip for Subaru cars. Commonly Used in Front Bumper, Front Grille,....
Check Stock

Retainer Case, Slim Aligner Case with Adjustable Vent Holes and Mirror, Compatible with Invisalign, Night Guard and Mouth Guard, Premium Retainer Case, With Aligner Remover Tool, Chew & Brush, White

  • PORTABLE RETAINER CASE WITH MAGNETIC CLOSE - This travel retainer case is 3.15 in diameter × 1.1 in height, slim and lightweight. You can put this retainer holder in your purse, bag, lunch box and pocket. The magnetic closure keeps the case securely closed to ensure the safety of your aligner..
  • ENOUGH INTERIOR SPACE - We went through a lot of research before designing this aligner case to ensure it fits all aligner brands such as Invisalign. It can even accommodate retainer accessories such as an Invisalign remover tool, aligner chewies and Dental floss while storing your retainers..
  • PREMIUM MATERIAL - This nightguard case is made of food-grade ABS. Not only aligner, but you can also use this mouthguard case to store your wire retainer, partial denture, mouth guard, night guard and even your other small items..
  • USER-FRIENDLY DESIGN - Built-in mirror helps you easily put on and take off the retainer and check if food is stuck in your teeth. The food-grade silicone pad on the inside prevents the retainer from moving, protecting your holder and reducing rattling noise in pockets and purses. Package included: 1× cute white re....
Check Stock

Drainzit STAN1438 Oil Change Aid for Briggs & Stratton Tecumseh 3/8' Oil Port

  • Drainzit oil hoses make changing oil easier and cleaner. Drainzit is easy to install, simple to use and requires no engine modification. For use on nearly all equipment powered by small engines: pressure washers, generators, pumps/sprayers, compressors, lawn mowers and more. Fits most briggs and stratton, tecumseh engines with 3/8 in. pipe thread oil drain port, Kohler command and OHC 16 and 18 HP Fittings convert to SAE wrench sizes Efficient - custom made metric fittings seal kit to.
  • Fits most briggs and stratton, tecumseh engines with 3/8 in. pipe thread oil drain port, Kohler command and OHC 16 and 18 HP.
  • Efficient - custom made metric fittings seal kit to engine with O-ring.
  • Rubber retainer loop holds kit in place when not in use.
Check Stock

Costa Del Mar Costa Loop Retainer Leash Black 20 in

  • COSTA LOOP RETAINER: The Costa Loop retainer is a minimal retainer designed for sunglasses with larger temple holes. The molded center clasp separates....
  • From end-to-end, the Costa Loop Retainer measures 20"..
  • The Costa Loop Retainer is compatible with all Costa sunglasses..
  • VISIT THE COSTA BRAND SHOP: Click on the Costa logo above to view the entire Costa sunglasses and accessories assortment..
Check Stock

Costa Del Mar Bowline Silicone Retainer Leash Costa Blue 19 in

  • COSTA SILICONE RETAINER: Flexible, durable and lightweight, the Costa Bowline retainer is a streamlined silicone retainer with sliding bead for....
  • From end-to-end, the Costa Bowline Silicone Retainer measures 19"..
  • The Costa Bowline Silicone Retainer is compatible with all Costa sunglasses..
  • VISIT THE COSTA BRAND SHOP: Click on the Costa logo above to view the entire Costa sunglasses and accessories assortment..
Check Stock

Woodzdon 50 Pcs 1/4 Hole Nylon Blind Rivet Fender Flare Bumper Cover Door Trim Retainer for Jeep Wrangler Liberty for GM 10184895 for Chrysler 6506007-AA for Ford N803862-S Plastic Expansion Clip

  • ...eep Wrangler JK & Wrangler Unlimited JK 2007-2021, Liberty KJ 2002-2012.
  • Other Names: Bumper Rivet, Fender Rivet, Plastic Rivet, Nylon Blind Clip, Nylon Expansion Clip, Fender Flare Clip, Bumper Cover Clip, Door Trim Clip, Fender Liner Clip, Bumper Fascia Clip, Bumper Clip, Fender Clip, Plastic Clip, Nylon Blind Retainer, Nylon Expansion Retainer, Fender Flare Retainer, Bumper Cover Retainer, Door Trim Retainer, Fender Liner Retainer, Bumper Fascia Retainer, Bumper Retainer, Fender Retainer, Plastic Retainer.
  • Other Names: Nylon Blind Fastener, Nylon Expansion Fastener, Fender Flare Fastener, Bumper Cover Fastener, Door Trim Fastener, Fender Liner Fastener,Bumper Fascia Fastener, Bumper Fastener, Fender Fastener, Plastic Fastener, Flare Rivet, Applique Rivet, Support Rod Rivet, Rocker Molding Rivet, Auto Body Retainer, Trim Moulding Clip, Plastic Clip, Auto Body Rivet, Trim Clip, Car Clip, Automotive Clip, Auto Fastener.
  • Placement: Molded-In-Color Fender Flares, Daytime Running Lamp System, Exterior Plastics Module, Body Color Fender Flares, Front Fascias Parts Module, Black Grille, Fascia to Flare, Fascia to Support Bracket, Flare to Body Side, Flare to Fascia, Front Flare Attaching, Front Flare To Body, Front Liner to Flare, Liner Attach, Rear Flar....
Check Stock