Reviews Oil Pump Valve

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

  • ..." Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
  • This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
  • This has the outlet facing the front. Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. These bolts and spacers are NOT included, but may be purchased at your local hardware store. Common bolt sizes: Two - 5/16" 18 x 2 1/2", One - 5/16" 18 x 3 1/2".
Check Stock

Leadrise 12V Electric Fuel Pump Universal Inline Fuel Pump Universal Low Pressure Gas Diesel Fuel Pump 2.5-4psi HEP-02A

  • ★【SPECIFICATIONS: 】 Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • ★【Electric Fuel Pump Performance:】 Low Pressure Fuel Pump, build-in check valve design to prevent back flow, light-weight and small size, Using a plunger-type of fuel supply way, suction stronger, oil supply more stable..
  • ★【12 Volt Fuel Pump: 】Upgrade check valve provides optimum traffic, reducing the noise of the pump so we can operate quietly. The Oil Absorption Capacity is Strong Enough to Ensure the Supply of Fuel.
  • ★【Easy to Install:】Universal Electric Fuel Pump 2 bolt fixing, 2 wires design, build-in check valve designed to prevent back flow. It can be used as booster, standby unit or as a completely independent fuel pump installation and mounted anywhere..
  • ★【WIDE APPLICATION:】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check Stock

3600 PSI Power Pressure Washer Water Pump 2.5 GPM 3/4 Shaft for Honda GX200

  • The ROP Shop replacement Horizontal Triplex Pressure Washer Pump.
  • Specs - Maximum Pressure: 3600 PSI, Maximum Flow: 2.5 GPM, Maximum Pump Speed: 3500 RPM. Maximum HP: 6.5 HP, Male Outlet: 22mm Threaded, Standard....
  • Includes - (1) Horizontal Triplex Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Oil Reader.
  • This pump mounts horizontal and MUST have the oil dip stick pointing up when mounted. Pump needs at least 6.5HP to handle PSI. Pump head CANNOT be....
  • Replaces most pumps with 3/4" shaft. The 4-bolt mounting pattern is 2 9/16" center to center.
Check Stock

EONLION 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Gear Gearbox

  • Function-10L capacity pneumatic air suction pump will help you quickly change (pump/distribute) the vehicle's ATF oil..
  • Why Need It- Pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy..
  • Advantage- Fluid extractor can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess..
  • Simple Operation-load more fluid at once. Pneumatic operation, easy to suck or pump oil. Equipped with pressure gauge (0-80 psi/0-6 bar), which can accurately read data..
  • Fitment- Suitable for a variety of models, such as compatible with Audi/Benz/BMW/Ford/Mini Cooper/Honda/Hyundai/Infiniti/Kia/Lexus/Nissan/Skoda/Toyota/Porsche/Volvo/Volkswagen DSG/Volkswagen CVT..
Check Stock

MSR Expedition Field Service Kit for Camping and Backpacking Stoves, All Whisperlite Stoves

  • Each kit includes: Jet & Cable Tool, O-Rings, Pump Cup oil, Safety Pin, Pump Seal, Air Tube, Fuel Tube and Filter, Shaker Needle, Fuel Tube Bushing, Check Valve Spring, Pump Cup, Check Valve Ball, Check Valve Plug, Check Valve Assembly, Jet Cleaning Wire.
  • WhisperLite Service Kit also Inlcudes: Priming Wick, WhisperLite G Jet, WhisperLite International G Jet, WhisperLite International K Jet, WhisperLite International/Universal UG Jet, WhisperLite International/Universal UK Jet, WhisperLite Universal UC Jet.
Check Stock

Jabsco Hotshot HD4 Kit - 12V 4GPM 60PSI Heavy Duty Washdown Pump w/25' Hosecoil

  • This high efficient fuel pump is an Perfect equipment for quick and clean oil-changes.It works great for pumping engine oil, crude oil and heating oil..
  • TSuitable for Oil crude oil Extractor used in motorcycles, caravans, cars, quads, industrial, water purification &treatmentequipmentvehiclecleaningagriculturalsprayingetc..
  • With handheld pump of Rotary Barrel Pump, more easily and safely to clean oil-changes. Built-in bypass valve and filter, easily accessible for cleaning oil pump..
  • Be widely used to draw water in yacht, fishing-boat, industry, etc.Fully automatic bilge pump, no separate float switch is needed..
  • Stainless Booster Water Pump/Electric Water Transfer Pump designed to transfer water from tanks, pools, rain barrels, and groundwater. Easy to set up and let it drain away from the accumulated water, ideal for both in-ground and above-ground pools..
Check Stock

VIVOHOME Dual Stage Rotary Vane HVAC Air Vacuum Pump with 1.5-Gallon Vacuum Chamber Kit with 3.5 CFM Vacuum Pump HVAC

  • The low noise design can effectively reduce motor vibration and make the vacuum pump run quieter.
  • CONVENIENT TO OPERATE - VIVOHOME air vacuum pump features a simple oil fill port for a clean pour, and the oil window provides you with vital information like oil level and oil quality.
  • The oil drain valve at the bottom ensures faster and more thorough emptying.
  • 1 bottle of 500ml vacuum oil is also included.
  • SAFE AND CONVENIENT OPERATION - The vacuum pump features a simple oil fill port—you can cleanly pour oil into this carefully designed port.
  • The oil window provides you with vital information such as oil level and oil quality.
  • The bottom oil drain valve drains faster and more thoroughly.
  • In addition, the design can prevent oil from flowing back to the pipe or container, making it safer to use.
  • The package Includes 1 bottle of 320ml vacuum oil.
  • SUITABLE FOR DIFFERENT NEEDS - The kit is used for defoaming silicone, epoxy, essential oil, polyurethane, etc..
  • It is commonly used for refrigeration maintenance, printing machinery maintenance, vacuum packaging, and medical equipment maintenance.
Check Stock

Engine Oil Pump

  • Melling has added this oil pump that address oiling issues frequently found in Ford 4-valve engines. The M360HV high volume oil pump provides 20% additional oil flow to assist in increasing the engines oil pressure by filling the additional clearances created by wear. As a result the pumps exceed original equipment manufacturers specifications to meet the demanding lubrication needs of those engines..
  • The pump has been designed by Melling engineering as drop-in replacement to the original equipment oil pump. No modifications to the engine, pickup tube assembly or other components are required. All the features that make our stock replacement M360 oil pumps perform so well have been utilized in the new high volume pumps this includes the coated cast iron cover plates..
  • In comparison the M360HV is a 20% higher volume version of the M360 stock replacement oil pump. In addition, the M360HV pumps have a 20 psi higher pressure relief setting/.
  • Every pump is performance tested after it is machined, cleaned, and assembled at our Jackson, MI facility. Melling is global supplier of engine parts and is ISO/TS 16949 and ISO 14001 certified..
Check Stock

XtremepowerUS 3CFM 1/4HP Air Vacuum Pump HVAC R134a R12 R22 R410a A/C Refrigeration Kit AC Manifold Gauge R134 Can Tap Included Carrying Tote

  • SIMPLE BUT POWERFUL - XtremepowerUS 1/4 HP 3 CFM 1-Stage Rotary Air Vacuum Pump is designed to have high efficiency and low noise output with internal high volume cooling fan for extended use (Include R-134A automotive air conditioning dispensing valve design with hand operated punch/valve control, connects all R-134a refrigerant cans with 1/4" Male threads).
  • HEAVY DUTY VACUUM PUMP - Die-cast Aluminum Alloy Casing enables the vacuum pump be light and durable at the same time. Equipped with brass fitting tethered safety caps to prevent oil leaks during transportation and handling..
  • HVAC GAUGE READING - The XtremepowerUS HVAC service gauge set is great for diagnosing and repairing AC systems. Ideal use for R12, R22, R134a and R410a.
  • EASY OIL CHANGE - The vacuum pump features a simple Oil Fill Port for a clean pour and Oil Drain Plug positioned beneath the oil reservoir to quickly drain when needed. Checking the spillage meter will help to ensure the proper level of oil..
  • PACKAGE INCLUDED: Multicolored set of three 36” hoses, Manifold Gauge, R134 Can Tap, Vacuum Pump Oil Bottle, Accessories and Storage Bag to keep equipment clean and dust free.
Check Stock

Robinair (15600) CoolTech Vacuum Pump - 2-Stage, 6 CFM

  • Robinair's CoolTech 2-stage rotary vane design vacuum pump features the power and capacity needed for a wide range of service applications as well as robust construction for a long service life.
  • Powerful 1/2 HP, 115V/60Hz thermally protected motor, 6 CFM free air displacement, and factory rated to 15 microns for a fast, thorough evacuation.
  • Offset rotary vanes build powerful compression within the pumping chamber - reducing pressure and vaporizing moisture.
  • durable molded polycarbonate base improves pump balance and minimizes vibration.
  • Iso-Valve isolates pump from system with just a quarter turn.
  • Gas Ballast design mixes moisture laden air passing through pump with relatively dry air so compression doesn't cause condensation.
  • 1/4, 3/8, and 1/2 inch male flare inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining of the reservoir.
Check Stock

Robinair (15400) CoolTech Vacuum Pump - 2-Stage, 4 CFM

  • Robinair's CoolTech 2-stage rotary vane design vacuum pump features the power and capacity needed for a wide range of service applications as well as robust construction for a long service life.
  • Powerful 1/2 HP, 115V/60Hz thermally protected motor, 4 CFM free air displacement, and factory rated to 15 microns for a fast, thorough evacuation.
  • Offset rotary vanes build powerful compression within the pumping chamber - reducing pressure and vaporizing moisture.
  • durable molded polycarbonate base improves pump balance and minimizes vibration.
  • Iso-Valve isolates pump from system with just a quarter turn.
  • Gas Ballast design mixes moisture laden air passing through pump with relatively dry air so compression doesn't cause condensation.
  • 1/4 inch and 1/2 inch male flare inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining of the reservoir.
Check Stock

Robinair (15120A) CoolTech Vacuum Pump - 2-Stage, 10 CFM

  • Robinair's CoolTech 2-stage rotary vane design vacuum pump features the power and capacity needed for a wide range of service applications as well as robust construction for a long service life.
  • Powerful 1/2 HP, 115V - 60Hz thermally protected motor, 10 CFM free air displacement, and factory rated to 15 microns for a fast, thorough evacuation.
  • Offset rotary vanes build powerful compression within the pumping chamber - reducing pressure and vaporizing moisture.
  • durable molded polycarbonate base improves pump balance and minimizes vibration.
  • Iso-Valve isolates pump from system with just a quarter turn.
  • Gas Ballast design mixes moisture laden air passing through pump with relatively dry air so compression doesn't cause condensation.
  • 1/4, 3/8, and 1/2 inch male flare inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining of the reservoir.
Check Stock

mistcooling 250 PSI Misting Pump

  • 250 psi pump quiet operation 35Db solenoid valve – Controls flow of water in the pump in built filter – helps protect your misting nozzles built in water by pass self-priming.
  • Nickel-plated brass button series With stainless-steel Orifice Standard 10/24-inch thread 0. 012-inch Orifice Rust-resistant fixed impeller pin 0. 014 GPM Flow per Nozzle.
  • Maximum inlet pressure: 100 psi Minimum inlet pressure: self- priming. Maximum outlet pressure: 250 psi (depends on line length and numbers of nozzles) maximum flow: 0. 9 GPM full load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
  • Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
  • 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter th....
Check Stock