Reviews Oil Pump Bolt Seal

AAA 90036 Horizontal Triplex Plunger Replacement Pressure Washer Pump Kit, 3200 PSI, 2.8 GPM, 3/4' Shaft, Includes Hardware and Siphon Tube, for Industrial Gas Powered Machines, Black

  • Extend the life of your pressure washer: Save money by replacing your pump instead of buying a whole new power washer. This easy-to-install kit is great for power washers that can support 3200 PSI at 2.8 GPM to wash walls, fences, sidewalks, vehicles, and more.
  • Easy Installation: This replacement pump features a garden hose inlet and threaded M22 connection high pressure hose outlet. The SAE standard bolt pattern that fits most* gas-powered pressure washers. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility).
  • Adjustable power: This pump includes PowerBoost Technology that delivers higher pressure at the nozzle for a more efficient cleaning experience. There is also a hand turn knob that lets you reduce power at your convenience for tasks that require lower pressure.
  • Know when to change your oil: The sight glass and advanced oil seal technology eliminates the need for a dipstick. With visibility to the oil level and the oil itself, you can easily see when oil levels are low or if water has clouded the oil.
  • Get the right pump for your machine: this pump is designed for g....
Check Stock

Racing Power Company R9729 Orange Drag Race Oil Pan for Big Block Chevy

  • Brand New Weiand Oil Pan Kit, 7 Quarts, Gold Zinc Finish, Fits 1986-2002 Small Block Chevy Drag Racing Engines (Holley Part #5003WND).
  • Fits: 1986-2002 Small Block Chevy Drag Racing Engines | Includes: Application specific oil pan | Oil pan gasket | Oil pump pickup | Pan mounting bolt kit.
  • Features: Trap door baffles keep oil under control during hard acceleration | Increased oil capacity to keep high performance engine oil systems fed properly | Kit includes Pan, Pump Pickup, Pan Gasket, and pan mounting bolt kit.
  • Specs: Application: 1986-2002 Small Block Chevy | Brand: Weiand | Crank Scraper Included: No | Dipstick Location: Passenger | Emission Code: 5 | Finish: Gold Zinc | Material: Stamped Steel | Oil Pan Capacity: 7 Quarts | Oil Pan Depth: 8.125" | Oil Pan Type: Fabricated | Product Type: Oil Pan Kit | Sump Location: Rear | Windage Tray Included: No.
  • NOTE: Kit designed to work with standard volume oil pumps..
Check Stock

Permatex 80038 Prussian Blue Fitting Compound 0.75 fl oz Tube Package may vary

  • All-purpose, medium strength threadlocker will lock and seal while preventing parts from loosening due to vibration.
  • Gel Squeeze Applicator provides accurate dispensing, putting the threadlocker where you want it.
  • Gel formula provides 'liquid-reliability' without drips, globs, mess or waste, allowing for easy overhead and vertical applications.
  • Ideal for all nut and bolt applications 1/4 inch to 1 inch (6mm to 25mm).
  • Suggested Applications: Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs.
Check Stock

Small Block Chevy Overhaul Gasket Set, 350 Chevy, 67-'85

  • Application Range: It fits 1957-1979 small block 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Application Range: It fits 1957-1979 small block Chevy 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Premium Quality: Gaskets provide a reliable means of repairng your engine for your daily street cruiser, tow vehicle, street rod, circle track, dirt track, and drag strip performance racing engines.
  • Gasket set includes the following pieces: Cylinder head gaskets, intake manifold gaskets, valve cover gaskets, exhaust manifold gaskets, timing cover gasket, timing cover seal, oil pan gaskets, water pump gaskets, fuel pump gasket, thermostat water outlet housing gaskets, distributor gasket, o ring valve stem seals, and rear main seal..
Check Stock

Troy Bilt Complete Pump Head Assy for RMW and SRMW Pumps AR42518

  • Extend the life of your pressure washer: Save money by replacing your pump instead of buying a whole new power washer. This easy-to-install kit is great for power washers that can support 3300 PSI at 2.4 GPM to wash walls, fences, sidewalks, vehicles, and more.
  • Easy Installation: This replacement pump features a garden hose inlet and threaded M22 connection high pressure hose outlet. The SAE standard bolt pattern that fits most* gas-powered pressure washers. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility).
  • Skip the Oil Change: This pump features a maintenance-free crankcase so you never have to change the oil. It is manufactured from fully anodized die-cast aluminum for protection against corrosion.
  • Extended durability: A Thermal Relief Valve (TRV) protects the pump from overheating while in bypass mode. The TRV releases small amounts of hot water and intakes cooler water to prevent overheating and extend the life of the pump.
  • Get the right pump for your machine: this pump is designed for gas-powered pressure washers with horizontal engines. Its SAE bolt patter....
Check Stock

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

  • The ROP Shop replacement 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500.
  • Specs - Maximum Pressure: 2400 PSI. Maximum Flow: 2.4 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8". 3 Bolt Pattern: 7 11/16” x 6 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
  • This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
Check Stock

Permatex 24010-6PK Medium Strength Threadlocker Blue Gel, 10 g Gel Twist Applicator (Pack of 6)

  • All-purpose, medium strength threadlocker will lock and seal while preventing parts from loosening due to vibration.
  • Gel Twist Applicator provides accurate dispensing, putting the threadlocker where you want it.
  • Gel formula provides ‘liquid-reliability’ without drips, globs, mess or waste, allowing for easy overhead and vertical applications.
  • Ideal for all nut and bolt applications 1/4 inch to 1 inch (6mm to 25mm).
  • Suggested Applications: Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs.
Check Stock

Z Whip LS Oil Pump Pickup Tube Girdle Pipe Hold Down Brace Support Billet Bracket MADE IN THE USA Compatible with GM Chevy LS Series Engines LSX LS1 LS3 LS2 LQ4 LS6 LQ9 5.3L 6.0L 6.2L

  • Compatible with all LS Series Engines 1997-2014 (GEN. III/IV small block chevy).
  • The factory oil pickup tube on LS engines is only secured by one bolt. This can potentially lead to a poor seal on the oil pump. Our Billet aluminum Oil pump girdle solves the issue by placing a clamp on both sides of the tube, securely holding it in place..
  • DOES NOT fit any LS oil pickup tube with welded flanges (GM # 12608593, Holley 302-1 and similar tubes). DOES NOT fit pickup tubes with two screw holes on their flange (Holley 302-2 tube and similar tubes)..
  • Proudly made in the USA from Aerospace Grade Billet Aluminum.
  • We are an AS9100D and ISO 9001:2015 Certified Manufacturer. Parts we produce fly at 30,000 feet where failure is not an option..
Check Stock

3600 PSI Power Pressure Washer Water Pump 2.5 GPM 3/4 Shaft for Honda GX200

  • The ROP Shop replacement Horizontal Triplex Pressure Washer Pump.
  • Specs - Maximum Pressure: 3600 PSI, Maximum Flow: 2.5 GPM, Maximum Pump Speed: 3500 RPM. Maximum HP: 6.5 HP, Male Outlet: 22mm Threaded, Standard....
  • Includes - (1) Horizontal Triplex Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Oil Reader.
  • This pump mounts horizontal and MUST have the oil dip stick pointing up when mounted. Pump needs at least 6.5HP to handle PSI. Pump head CANNOT be....
  • Replaces most pumps with 3/4" shaft. The 4-bolt mounting pattern is 2 9/16" center to center.
Check Stock

Pentair Replacement Kit Pool and Spa Inground Pump, Almond

  • Fits Pentair WhisperFlo, IntelliFlo VF, VS 3050, VS-SVRS pool and spa inground pumps.
  • Also Includes Almond gasket for seal plate, black gasket for seal plate, lid, see thru WF, lid, chemical resistant, clamp cam and ramp WF.
  • measures 19-1/4-inch length by 15-1/4-inch height by 14-1/4-inch width.
  • Includes basket WF, bolt, foot WF, foot insert WF pump, plug drain WFE, o-ring, o-ring lid, housing WFE, seal plate kit.
Check Stock

PEGGAS 7/8\ Shaft Vertical Pressure Washer Pump - 3000 PSI @ 2.5 GPM OEM & Replacement Pump for Power Washer Compatible with 308653045, 308653093, 308653052, 308653078, GCV190, and more

  • Extend the life of your pressure washer: Save money by replacing your pump instead of buying a whole new power washer. This easy-to-install kit is great for power washers that can support 3100 PSI at 2.4 GPM to wash walls, fences, sidewalks, vehicles, and more.
  • Easy Installation: This replacement pump features a garden hose inlet and threaded M22 connection high pressure hose outlet. The SAE standard bolt pattern that fits most* gas-powered pressure washers. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility).
  • Skip the Oil Change: This pump features a maintenance-free crankcase so you never have to change the oil. It is manufactured from fully anodized die-cast aluminum for protection against corrosion.
  • Extended durability: A Thermal Relief Valve (TRV) protects the pump from overheating while in bypass mode. The TRV releases small amounts of hot water and intakes cooler water to prevent overheating and extend the life of the pump.
  • Get the right pump for your machine: this pump is designed for gas-powered pressure washers with vertical engines. Its SAE bolt pattern,....
Check Stock

OEM Technologies 90029 Replacement Pressure Washer Pump Kit, 3400 PSI, 2.5 GPM, 3/4\ Shaft, Includes Hardware and Siphon Tube, for Residential and Industrial Gas Powered Machines

  • Extend the life of your pressure washer: Save money by replacing your pump instead of buying a whole new power washer. This easy-to-install kit is great for power washers that can support 3400 PSI at 2.5 GPM to wash walls, fences, sidewalks, vehicles, and more.
  • Easy Installation: This replacement pump features a garden hose inlet and threaded M22 connection high pressure hose outlet. The SAE standard bolt pattern that fits most* gas-powered pressure washers. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility).
  • Skip the Oil Change: This pump features a maintenance-free crankcase so you never have to change the oil. It is manufactured from fully anodized die-cast aluminum for protection against corrosion.
  • Extended durability: A Thermal Relief Valve (TRV) protects the pump from overheating while in bypass mode. The TRV releases small amounts of hot water and intakes cooler water to prevent overheating and extend the life of the pump.
  • Get the right pump for your machine: this pump is designed for gas-powered pressure washers with horizontal engines. Its SAE bolt patter....
Check Stock

FLUENTPOWER 3/4 HP Utility Pump with Full Stainless Casing, Submersible Sump Water Pump with Float Switch,Max Lift 27 Ft and Max Flow 3300 GPH, 3/4" Garden Hose Adapter and 1"&1.5" MNPT Included

  • 【Float Switch Automatically Control】- The pump is automatically ON/OFF controlled by float switch according to water level. It starts at water level 30~50cm and stop at 10~15cm. It can remove water down to 1 cm by manually control..
  • 【Full Stainless Casing and Long Cable Cord】Solid metal casing is resistant to rust. This pump is only works with clean water that contains small solid less than 5mm. Pump also comes with a long 26.2ft cable cord, which allows pump to go deep enough (23ft) in the water..
  • 【Oil-Filled Seal Structure with Thermal Protection】- Oil-filled seal structure gives pump longer duration, which is much longer than regular mechanical seal. Thermal protector ensures that the pump will not be burned out. Even when the pump trigger thermal overload protector, pump will rework after cooling down..
  • 【3/4 HP Power High Efficiency】- Maximum capacity of transferring water up to 3300 GPH with 1.5″ discharge port and hose horizontally, Maximum delivery height is 28ft vertical, 2200 gallons per hour on at 10ft discharge lift..
  • 【GHT 3/4″, NPT1″ and 1.5″ male tread connectors included】- With 1.5″ discharge port will give pump maximum output flow rate. Multiple hose adapters help you to get pump starte....
Check Stock