Reviews Oil Pressure Switch Lock Ring

ABN Adjustable Ratchet Piston Installer Tool, 3in Piston Ring Compressor – Installation Compressing 2.1in to 6.9in

  • EASY PISTON RING INSTALLATION: The ABN 3” Inch Piston Ring Compressor is a ratchet-type lock mechanism with fingertip easy release thumb switch lever, hex spanner, and adjustable safety screws to allow for safe and quick install of piston rings by simple ring compression.
  • DAMAGE-FREE: Perform engine rebuilds and use this compressor for proper installation of the piston and rings in the cylinder without twisting or damaging parts.
  • Perfect fit on the piston and a positive locking action to compress rings and allow installation of pistons into cylinders.
  • WORKS ON VARIOUS PISTONS: Designed for use on the most common automotive piston and ring diameters ranging in thickness from 2.1-inch to 6.9-inch (53mm to 175mm).
  • Small enough to use on small engines such as push mowers and riding mowers.
  • Large enough to use on machine tractor pistons.
  • EASY TO USE: Use an oil lubrication (not included) on ring and piston before compressing.
  • Place piston inside the cylinder, tighten the compressor, lightly tap the piston into the bore with a rubber mallet (not included) while holding downward pressure on compressor.
  • BUILT TO LAST: Constructed from spring steel for maximum strength and longevity that resists corrosion.
Check Stock

mistcooling 24\ OSC Misting Fan Kit - High Pressure - (3 Fan)

  • 24 Inch Fans 1500 PSI Misting Pump Six Nozzle Stainless Steel Misting Fan Ring 25 Ft High Pressure Flexible Tubing Stainless Steel Misting Nozzles Stainless Steel ¼ Inch Clamps Easy to Install DIY Install.
  • Misting Pump Features : Maximum Pump Speed (0.15/ 0.30 gpm.): 1800 RPM Maximum Inlet Pressure: 100 PSI Minimum Inlet Pressure: (Based on setting on Pressure switch) or Flooded if Pressure switch is bypassed Maximum Outlet Pressure: 1500PSI Maximum Flow: 0.15 GPM, 0.30 GPM (Refer to manufacturing label on pump) Full load Amps. (0.15/ 0.30 gpm.): 1.38 Amps. /2.15 Amps Voltage: 110V/ 220V AC (Refer manufacturing label on the pump) Noise Level: 75 DB. Maximum Fluid Temperature: For Room Tem.
  • Outdoor Fan Features : "Size: 24” Color: White RPM: 1110, AMPS: 2.65, CFM:9100 3 speed Pull chain Stainless Steel hardware with Durable Corrosion resistant finish Motor with thermal Overlade protection industrial Grade aluminum blade 10 Ft Heavy Duty cord with cord wrap Quiet operation For indoor/ Outdoor Use Osha Approved Grill ".
  • Stainless Steel Ring Features Made with Industrial Grade 3/8'' Rigid Stainless Steel 316 Compatible with all High and Mid Pressure Mist Pumps Pre-threaded nozzle slots for 10/24 Thread Rated for up to 2000PSI Attaches to any wall mount, ....
Check Stock

Benefast VTEC Solenoid Spool Valve w/Timing Oil Pressure Switch & Gasket Compatible with Honda Accord CR-V Element Civic Acura RSX Acura TSX Replacement# 15810-RAA-A01 15810-RAA-A03

  • The VTEC (Variable Valve Timing and Lift Electronic Control) system increases the amount of intake valve lift for increased power. It accomplishes this by turning a control solenoid 'ON' to allow oil pressure into the VTEC control passages to apply pins that will lock the intake rockers. When the oil pressure is present, the pressure switch signal will go high. When the control solenoid is turned 'OFF', the oil pressure is dumped and the oil pressure switch signal will go low..
  • If the pressure switch signal is not logical for the commanded state of the control solenoid, a DTC will set and the PCM will go into a 'fuel-cut' mode limiting engine rpm and performance. The PCM simply doesn't 'know' what the state of the intake valves are, so you end up with the symptoms you describe..
  • This VTEC Solenoid Fits for the Following Vehicles: Honda Accord 2003-2007, Honda Civic 2002-2005, Honda CR-V 2002-2009, Honda Element 2003-2011, Acura RDX 2002-2012, RSX 2002-2006, Acura TSX 2004 2005 2006 2007 2008..
  • Customers can find the product you need accurately according to the OE number. Replacement part number: 15810-RAA-A01, 15810-RAA-A02, 15810-RAA-A03, 15810-PNE-G01, 917-224, 917224, 15810RAAA01, 15810RAAA03, 15810RAAA02, 15810PNEG01..
Check Stock

mistcooling 160PSI Misting Pump (220 V-AC)

  • Specs: 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push- lock fitting..
  • Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle..
  • Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings..
  • Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75 degree F - UV Resistant Flexible Tubing - Black Color - UV Treated..
Check Stock

UTG Gen 2 Light/Green Laser Combo with Integral Mount

  • 2-In-1 tactical 2nd generation Flashlight/green laser combo with Integral mounting deck and patented QD lever lock.
  • New flashlight circuit board design with 400 lumen power upgrade and extended 3 hour runtime.
  • Class 3R Green Laser with Textured Rubber Push-button On/Off, Remote Pressure Switch, 1x CR2 Battery and 2x CR123A Batteries.
  • Rotational laser ring to provide 10 solid locking positions for laser around the light for close -to-bore and individualized placement options.
  • Triple-function Flashlight end cap with push-button momentary on, permanent twist on, and additional remote pressure switch operation.
Check Stock

Itisll Manual Garden Sprayer Hand Lawn Pressure Pump Sprayer Safety Valve Adjustable Nozzle 0.5 Gal

  • MULTIFUNCTIONAL USE: The manual pressure sprayer is used for household cleaning, plant maintenance and other indoor and outdoor use. This lawn sprayer is suitable for liquids with a PH value of 5-9, and is not suitable for strong acids or alkalis..
  • EFFICIENT & SAFE: The center pump of this garden sprayer is designed to be stronger, which can obtain pressure more quickly and effectively. And the sprayer is equipped with a safety valve, when the pressure exceeds 2.5-3Bar, the safety valve automatically releases the excess pressure..
  • ADJUSTABLE NOZZLE & LOCK SWITCH: The nozzle can adjust the intensity of water, from water jet to fine mist jet.The trigger with lock can spray continuously for a long time to reduce fatigue of fingers..
  • ADDITIONAL SPARE PARTS: Each sprayer is equipped with a set of seal ring repair kits to extend the service life of the sprayer..
  • SERCICE GUARANTEE: If any quality problem occurs within one year, please contact ITISLL for free replacement or unconditional refund..
Check Stock

mistcooling Patio Misting System - 160psi (12VDC-12 Nozzles Kit - W/Out Enclosure)

  • Features: Base 10 Nozzle Kit Includes: - 1- 160 PSI Misting Pump - 12 – Brass/Stainless Steel Misting Nozzles - 12 – Push to Connect Black Color Misting Tees - 1 – Push to Connect Misting Elbow - 1 – Calcium Inhibitor Filter - 30 - ¼ Inch Black Clamps - 50 Feet of Black Tubing - 6 Ft Feed Line.
  • Specs: - 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push lock fitting..
  • Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle.
  • Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings.
  • Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75°F - UV Resistant Flexible Tubing - Black Color - UV Treated. MC12020-MC12024.
Check Stock

SCHNECKE 5S7247-AA Engine Coolant Temperature Sensor

  • Check the Amazon Parts Finder to see if this parts fit your vehicle and check the descroption also to see the detail fitment info.
  • Innovative engineering, manufacturing technology and quality control ensure that SCHNECKE Engine Oil Pressure Switch meet or exceed the performance of the original equipment they replace. Every unit is designed to OE fit, form and function requirements accomplished by leveraging SCHNECKE's OE expertise.
  • SCHNECKE offers complete Engine Oil Pressure Switch coverage for Asian, Domestic and European vehicles, top brand awareness and unsurpassed quality.
  • SCHNECKE warrants its Engine Oil Pressure Switch for a period of One years from the date of purchase. Within this period, we will replace any Engine Oil Pressure Switch shown to be defective in material or workmanship.Designed to provide a perfect fit for a hassle free installation, this reliable product can help you get you vehicle back on the road faster and easier..
Check Stock

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....
Check Stock

Oil Pressure Sensor Engine Oil Pressure Switch Sensor, 0 to 10 Bars 1/8 NPT Oil Pressure Sensor Gauge Sender for Diesel Generator

  • EASY INSTALLATION: The engine oil pressure switch sender is compact design for easy portability and storage, easy to install and use.
  • DURABLE: The engine oil pressure switch sensor adopts with top grade aluminium alloy, resistant to high temperature from -25 to 100 degree, can increase service life.
  • PRESSURE RESISTANCE: The oil pressure gauge sensor is resistant to high pressure up to 10 bar, can meet your use.
  • PRACTICAL: The engine oil pressure sensor has 1/8" NPT male thread for connecting to male threaded pipe fittings, very practical in work and life.
  • WIDELY APPLICATIONS: The oil pressure sensor NPT-1/8 has widely applications, which is applicable to water, oil, and gas(no freezing).
Check Stock

High Pressure Oil Pump Master Service Kit with Base Gasket, HPOP Upgraded Full Compatible with 1994-2003 Ford Powerstroke 7.3L Diesel Engine 7.3L F250-F550, E250-E450, Excursion (Pack of 22 Set)

  • ★High Pressure Oil Pump Master Service Kit includes all the components you need to replace all seals and O-rings on your high-pressure oil pump and correctly reinstall the pump..
  • ★Comes with many components you won’t find in other HPOP seal kits on the market today.
  • ★Suitable for 1994-2003 Powerstroke 7.3L Diesel and 1995-2004 Navistar DT466 & T444E.
  • ★Package Include:2- Discharge port O-Rings,1- Rear Port Plug O-Ring,1- Non- Serviceable Port O-Ring,1- IPR Valve O-Ring,1- IPR Nut,1- Fill Plug O-Ring,1- Non-serviceable port long threaded repair plug,1- Set of Repair instructions,2- Diesel High Pressure Oil Pump STC Fittings,1- STC Quick Disconnect Tool,1- High Pressure Oil Pump Mounting Gasket.
  • ★100% satisfaction：If you are not satisfied with our High Pressure Oil Pump Master Service Kit ,please contact us,we will try our best to solve your problem..
Check Stock

OLIGHT Odin 2000 Lumens Picatinny Rail Mounted Rechargeable Tactical Flashlight with Remote Pressure Switch 300 Meters Beam Distance Powered by Battery Black

  • [Powerful and Long-lasting] Powered by a single OLIGHT customized battery, the Odin delivers an impressive 2,000 lumens, can reach up to 300 meters, and has an 8-hour runtime..
  • [Secure and Professional Design] The OLIGHT Odin is designed specifically for PICATINNY mounts and features a removable slide rail mount with a mechanical lock for secure operation. Also compatible with Mlok and Key-mod mounts for versatile use..
  • [Innovative Pressure Switch] Odin's magnetic remote pressure switch is both innovative and functional, featuring a locking function for a tight fit with just a single push of the anti-slip knurling ring..
  • [Fast and Efficient Charging] The tactical flashlight adopts the MCC3 USB magnetic charging cable, which allows for a charging current of up to 2A, greatly improving charging efficiency..
  • [Multifunctional Tailcap] OLIGHT WML Odin Series has unique tail cap is both multifunctional and easy to use, featuring an integrated magnetic charging tail switch with compatible locking remote controlling, making tactical operation a breeze..
Check Stock

mistcooling High Pressure Misting System 1500 PSI - Flexible (60 Feet - 20 Nozzles)

  • Features: Base 20 Nozzle Kit Contains: - 1 - Max1500 psi High pressure pump with built-in water on/off valve, low water cut off switch, pressure bypass, commercial 5-micron filtration, Outdoor Rust Proof Enclosure with on/off Switch.
  • - 60ft 1/4" Nylon Tubing-Black - 20 - HP Push Lock Misting Tees.
  • - 20- Stainless Steel Orifice Nozzles (0.006") - 1 - Push Lock End Plug - 2- Nozzle plugs - 2- Replacement Nozzles - 1- Drain Valve Assembly - Stainless Steel Mounting Clamps.
  • Specs:1500 PSI Misting Pump: 0.15 & 0.30 GPM - For up to 40 Misting Nozzles - Pressure Adjustment Valve to allow increase or decrease of the outlet water pressure. - Pump pre-set for ideal working - Solenoid Valve – controls flow of water in the misting pump - Pressure Switch or no cut off water switch will turn pump off, if no water supply - Thermal Safety Swithc - Maximum Speed 1800 rpm - Full load Amps. (0.15/ 0.30 gpm.) 1.38/ 2.00 Amps - Noise level: 75 DB - Maximum Inlet Pressure–100psi.
  • Filter: - 5 Micron Filter - Filter in the package comes with 3/8 inch inlet- outlet fitting. - Standard pump comes with ¼ inch push lock type fitting.
  • However, it is placed on 3/8 inch male and ¼ inch female adapter. - Outlet comes with ¼ inch fitting as standard.
Check Stock