Reviews Oil Pressure Sender Replacement

FASTROHY 0.5-4.5V 60 Psi Universal Pressure Transducer Sender/Sensor Solenoid for Oil Fuel Diesel Gas Air Water,Gauge Pressure 1/8\NPT Thread Stainless Steel

  • Works for oil,fuel,diesel,gas,water,air pressure.
  • Can be used in oil tank,gas tank,diesel tank etc.
  • It's an advance pressure sender than traditional mechanical pressure sender.
  • CMC for Load Cell Sensor. CMC for Pressure and Pull Pressure Sensor..
  • Package Includes: 1PC x Pressure transducer (With cable).
Check Stock

AUTEX 150 Psi Pressure Transducer/Sender/Sensor 150/200 Psi Stainless Steel 1/8”-27 NPT Pressure Transducer Sensor Compatible With Oil Fuel Air Water

  • 100% brand new Pressure transducer/sender/sensor 150 psi stainless steel for oil,fuel,air,water.
  • 150 psi Pressure transducer/sender/sensor/Transmitter....
  • Output: 0.5V–4.5V linear voltage output. 0 psi outputs 0.5V, 100 psi outputs 2.5V, 150 psi outputs 4.5V.
  • Pressure Medium:The gas and liquid which is compatible with 316L stainless steel / Electromagnetism Compatibility:EN50081-1.
  • Package include: 1 pcs x150 psi pressure transducer.
Check Stock

Oil Pressure Sensor Engine Oil Pressure Switch Sensor, 0 to 10 Bars 1/8 NPT Oil Pressure Sensor Gauge Sender for Diesel Generator

  • EASY INSTALLATION: The engine oil pressure switch sender is compact design for easy portability and storage, easy to install and use.
  • DURABLE: The engine oil pressure switch sensor adopts with top grade aluminium alloy, resistant to high temperature from -25 to 100 degree, can increase service life.
  • PRESSURE RESISTANCE: The oil pressure gauge sensor is resistant to high pressure up to 10 bar, can meet your use.
  • PRACTICAL: The engine oil pressure sensor has 1/8" NPT male thread for connecting to male threaded pipe fittings, very practical in work and life.
  • WIDELY APPLICATIONS: The oil pressure sensor NPT-1/8 has widely applications, which is applicable to water, oil, and gas(no freezing).
Check Stock

1/4 NPT Plug Pipe Plug Fitting Countersunk Thread Internal Hex Head Style Male Plug (1/4 inch Brass Plug, Pack of 5)

  • SIZE -- Brass 1/4 inch NPT pipe fitting plug, pack of 5..
  • ACID-RESISTANCE & ANTI-CORROSION MATERIAL-- Internal Hex Thread Male Plug is made of high quality brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.achinery, fittings or pipes to prevent leakage of air, steam, gases, water, oil and fluids under pressure. These plugs are also great for blocking off intake manifold water ports, water pump ports, water temp and oil sender holes, engine block holes, etc..
  • APPLICATIONS -- Designed to create a tighter seal for masking threaded holes and is commonly used to seal holes in machinery, fittings or pipes to prevent leakage of air, steam, gases, water, oil and fluids under pressure. These pipe plugs are also great for blocking off intake manifold water ports, water pump ports, water temp and oil sender holes, engine block holes, etc..
  • HIGH STRENGTH AND HARDNESS -- NPT Male Pipe is high strength and hardness ，make it last longer. Reduces the trouble of leaking and leaking during your use..
  • CUSTOMER SERVICE -- Professional factories produce quality threaded pipe. Every detail reflects a strong texture performance. Fast Delivery, we guarantee the quality before the item ships. 30 Days Free Refund..
Check Stock

Suuonee Electronic Boost Gauge Sender, Auto Car Electronic Boost Gauge Sender/Sensor Unit Practical Accessory

  • Adaptation: Car Electronic Boost Gauge Sender is only fits for Ford Mustang 86-93 gauge. Pressure sensor with vacuum tube for replacing defi link pressure gauge..
  • High Quality: Electronic Boost Gauge Sender is made of high quality material for maximum durability, which has long service life. Good quality can provide a safer guarantee for your life..
  • Excellent Performance: Electronic Boost Gauge Sensor adopt advanced manufacturing, high reliability and high performance. Original standard, direct replacement for the old or broken one..
  • Easy To Install: Electronic Boost Gauge Sensor is easy to install, no complicated tools required, convenient to use. Let you get rid of the trouble of installation..
  • Quality Assurance: We offer a 12 month warranty, true worry free shopping experience. If you have any problem, feel free to contact us, our professional mechanic will sort things out for you..
Check Stock

LEFOO T2000 0-200PSI with 1 Meter Cable Fuel Pressure Transducer Sender Sensor 316 Stainless Steel Oil Pressure Transmitter 1/8\ NPT Thread Pressure Transducer for Oil Fuel Air Water Diesel Gas

  • 100% new pressure transducer /pressure Sender/ Pressure Transmitter, Our material is using top of line 316 stainless steel (not 304)and high temperature auto-graded plastic.It's an advance pressure transducer than traditional mechanical pressure transducer，anti-interference, high stability..
  • Model: T2000 Packard. Pressure Range:0~200psi. Electrical connection:Packard with 1 meter cable.Overload Pressure:1.5 times of full scales. Burst Pressure:3 times of full scales..
  • Accuracy:±1%F.S. Output:0.5-4.5V. Power Supply:10-30VDC. Pressure Connection: 1/8 NPT male Connection.Working Temperature:-40 ~ 100°C.Response Time:10ms..
  • Medium:Gas,Water,Oil, diesel,air. Works for oil, fuel, diesel, gas, water, air pressure, can be used in oil tank, gas tank, diesel tank etc.
  • We have a strong customer service team, welcome to contact us if you have any question.
Check Stock

MOTOR METER RACING 6 Gauge Set Classic with GPS Electrical Speedometer Digital Odometer Black Dial

  • Speedometer & Tachometer: Standard 3-3/8"(85mm) sized back. For any 1 to 9 cylinder gas powered engine & 12-volt negative ground systems. Volt gauge, Oil pressure gauge, Water temp gauge, Fuel gauge: Standard 2"(52mm) sized back..
  • FEATURES: In-dash design, Light bulb illumination, Convex lens, Stainless bezel, Plastic housing. Cylinders switch on the gauge back..
  • Speedometer Readings from 0 to 140 MPH, Tachometer Readings from 0 to 8000 RPM, Volt Readings from 8 to 16V, Fuel Level Readings from E, 1/2, F, Water Temperature Readings from 100° to 250°F, Oil Pressure Readings from 0 to 100 PSI..
  • INCLUDES: GPS Sensor & Converter, Water temp sensor (Thread size: 1/8 NPT), Oil pressure sensor (Thread size: 1/8 NPT), Fuel level sender, Power harness, U-bracket kit, Tachometer Filter x 2, Installation Instructions..
  • One-year warranty for non-human factor damage and free lifetime technical support..
Check Stock

Sunpro CP7001 Sport ST 2" Electrical Oil Pressure Gauge Kit

  • Reads 0-100 psi with a 90 degree dial sweep.
  • 2 inch black face to be mounted in a 1-1/6 inch hole.
Check Stock

ARTILAURA 6 Gauge Set-GPS Speedometer, Tachometer, Fuel Gauge, Water Temperature Gauge, Oil Pressure Gauge, Voltage 7 Color Backlight for Car AUTO Boat Marine

  • 6 Gauge Kit- Includes GPS Speedometer, Tachometer, Fuel Gauge, Water Temperature, Volt and Oil Pressure Gauge. 7 color backlight : red、green、blue、yellow、olivine、orange、purple..
  • [ GPS Speedometer Gauge Set ]: GPS Speedometer gauge indicating Range: 0 - 80 MPH, Tachometer indicating Range: 0 - 8000 RPM, Volt gauge indicating Range: 8 - 16V, Fuel Level gauge indicating Range: E - F & Resistance 240-33 ohms, Water Temperature gauge indicating Range: 30 - 250°F (0 - 120°C), Oil Pressure gauge indicating Range: 0 - 150 PSI (0 -10 BAR)..
  • GPS Speedometer and Tachometer: Standard 85mm (3 3/8") hole in the panel (II) and allow a clearance of 55mm (2 3/16") behind the panel to fit the gauge. The Fuel Gauge, Water Temperature, Volt and Oil Pressure Gauge diameter is 2-1/16 inch (52mm)..
  • 【Material】The boat gauge are made of 316L Metal, Rubber and Plastic. Scratch resistant curved glass lenses. IP67 waterproof and dustproof grade..
  • ⭐⭐⭐⭐⭐[Attention]: Package Includes GPS Antenna, Tachometer Sensor(M16*1.5), Water Temp Sensor (1/8 NPT), Oil Pressure Sensor....
Check Stock

Equus E7500 5-Piece Gauge Kit

  • Set includes speedometer, water temperature gauge, oil pressure gauge, electric fuel level gauge, and voltmeter.
  • Kit includes mating fuel level sender (0E/90F), bulb and socket assemblies, installation adapters, mounting hardware, and detailed instructions for....
  • Bright backlit display enhances nighttime viewing.
  • Speedometer features a traditional rolling drum odometer and a resettable trip meter.
  • Speedometer accepts a 5/8" x 18 thread speedometer cable and is calibrated for 60 MPH at 1,000 cable RPM.
Check Stock

ARTILAURA 6 Gauge Set-GPS Speedometer 120MPH, Tachometer, Fuel Gauge, Water Temperature Gauge, Oil Pressure Gauge, Voltage 7 Color Backlight for Car AUTO Boat Marine(White)

  • 6 Gauge Kit- Includes GPS Speedometer, Tachometer, Fuel Gauge, Water Temperature, Volt and Oil Pressure Gauge. 7 color backlight : red、green、blue、yellow、olivine、orange、purple..
  • [ GPS Speedometer Gauge Set ]: GPS Speedometer gauge indicating Range: 0 - 120 MPH, Tachometer indicating Range: 0 - 6000 RPM, Volt gauge indicating Range: 8 - 16V, Fuel Level gauge indicating Range: E - F & Resistance 240-33 ohms, Water Temperature gauge indicating Range: 30 - 250°F (0 - 120°C), Oil Pressure gauge indicating Range: 0 - 150 PSI (0 -10 BAR)..
  • GPS Speedometer and Tachometer: Standard 85mm (3 3/8") hole in the panel (II) and allow a clearance of 55mm (2 3/16") behind the panel to fit the gauge. The Fuel Gauge, Water Temperature, Volt and Oil Pressure Gauge diameter is 2-1/16 inch (52mm)..
  • 【Material】The boat gauge are made of 316L Metal, Rubber and Plastic. Scratch resistant curved glass lenses. IP67 waterproof and dustproof grade..
  • ⭐⭐⭐⭐⭐[Attention]: Package Includes GPS Antenna, Tachometer Sensor(M16*1.5), Water Temp Sensor (1/8 NPT), Oil Pressure Senso....
Check Stock

MOTOR METER RACING Electrical 6 Gauge Set - 3-3/8\ 85mm Electrical Speedometer & Tachometer - 2-1/16\ 52mm Voltage, Fuel Level, Water Temperature & Oil Pressure - Black Dial - White Needle

  • MOTOR METER RACING Classic Series 6 Gauge Kit is Designed for Vintage Style, Features the 6 Most Essential Gauges for Any Car or Truck's Instrument Cluster - Includes Speedometer & Tachometer - Voltage, Fuel Level, Water Temperature, Oil Pressure.
  • Fits any 1 to 9 Cylinder Gas Powered Engine & 12-Volt Negative Ground Vehicle. Works with ECU Signal - Black Dial - 316 Stainless Bezel - White Light bulb Illumination - Convex Lens & White Needle.
  • Speedometer Readings from 0 to 140 MPH, Tachometer Readings from 0 to 8000 RPM, Volt Readings from 8 to 16V, Fuel Level Readings from E, 1/2, F, Water Temperature Readings from 100° to 250°F, Oil Pressure Readings from 0 to 100 PSI.
  • Package Includes 2' Speedometer Power Harness, 2' Tachometer Power Harness, Water Temp Sensor (1/8 NPT), Oil Pressure Sensor (1/8 NPT), Fuel Level Sender, U-bracket kit & Installation Instructions.
  • One-year Limited Warranty & Free Lifetime Technical Support.
Check Stock

Engine Oil Cooler Filter Housing Adapter Compatible with 3.6L 2014-2017 Jeep Wrangler Dodge Challenger Charger Chrysler Town&Country w/Intake Manifold Gaskets Plenum Set, Oil Pressure Sensors

  • *New Upgrade Quality & Improved Manufacturing. Engine Oil Cooler Filter made in better raw material. The radiator parts are welded layer by layer of aluminum alloy plates. All parts are tested with high-pressure fluid. The main plastic body is made with new ABS, NOT recycled ABS( which will leak after using for 6 or fewer months.).
  • Seal upgrade, New Fluororubber gaskets are more durable and prevent leaks better. Even the seal is made of good rubber. Well-made copper base and port. Intake Manifold Gasket Set is made of high-quality silicone..
  • This Engine Oil Cooler Filter is Compatible with 3.6L 2014-2017 Jeep Wrangler Grand Cherokee Dodge Avenger Challenger Charger Caravan Chrysler Town & Country..
  • Oil Cooler is Replacement for 2014 2015 Dodge Durango.
  • Ram C/V. 2014 Dodge Avenger.6 Cyl 3.6L. 2014 2015 2016 2017 Chrysler 200,300.
  • This Cooler comes with Temperature Sender Sensors! Tips: To prevent leaks or other problems, make sure each washer is installed in the right place. Please make sure that the oil port/hole is appropriate, some users said that the size is too large for their models, only simple grinding can be normal installation. Any questions, please contact us for help..
Check Stock