Reviews Oil Pressure Gauge Tool

JIFETOR Oil Pressure Tester Kit, Professional Engine Diagnostic Test, 100PSI Pressure Gauge Tool with Hose Adapter for Truck Car ATV

  • OIL PRESSURE TEST AND DIAGNOSTIC: JIFETOR engine oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • FITMENT TYPE: The oil pressure test tool includes 3 sizes (1/8" NPT, 1/4" NPT, 3/8" NPT) selectable brass adapters, can be connected to the corresponding sizes oil pressure test service port, on most gasoline or small diesel engine, includes car, motorcycle, ATV, truck and so on, which oil pressure not exceeds 100psi..
  • PRESSURE GAUGE AND HOSE: Pressure gauge adopts rubber cover protected 3" large dial. 0-100psi and 0-7bar small scale range with big dial, very easy to read. No pressure holding function, return to zero automatically. The 30" long rubber nylon resin hose, is equipped with a 1/8" NPT brass adapter, can be connected to 1/4" NPT and 3/8" NPT adapters directly. Max working pressure: 300psi.
  • EASY TO OPERATE: When you want to test the oil pressure by this engine oil pressure diagnostic gauge, disasse....
Check Stock

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....
Check Stock

Oil Pressure Tester Kit, 0-140 PSI Engine Oil Pressure Tester Gauge Tool Kit for Cars ATVs Trucks Use.

  • FUNCTION: The engine oil pressure tester kit is used to diagnose and test the engine oil pressure value, to check whether it is normal. The measured value can be used to judge the operation of fuel system components such as electric gasoline pump and oil pressure regulator. And with this best in class oil pressure test tools, you can get a definite pressure value well without relying on the dashboard light..
  • INCLUDING: This oil pressure test tool kit contains a wide assortment of durable adapters designed to fit mot import/domestic engines. The 10 adapters are marked with number, you can choose the right one very easy. 4FT long hose is made of rubber nylon resin, working pressure 300 PSI. This is a great kit for DIY auto tools, to test engine oil pressure value quickly and accurately..
  • DURABLE AND SAFE: The material of the engine oil pressure tester kit consists of Copper, Rubber, ABS Plastic, Iron, and Aluminum.
  • And the gauge is equipped with a shockproof cover, which is under great protect and convenient maneuverability.
  • Whole oil pressure tester kit packed in a molded case making it easy to store and organize the equipment..
  • PARAMETER: The oil pressure gauge use 3" big dial with clear dual scale range 0 to 140 PSI and 0 to 10 Bar. Compare to a large ....
Check Stock

JoyFans Oil Pressure Tester Tool, 0-140PSI Oil Pressure Gauge Kit for Fuel System Mechanical Sensor Engine Cylinder Compression Test with Hose Adapters for Cars ATVs Trucks Use Red Case

  • Fuel Injector Pump Pressure Check: Engine oil pressure test tool kit is designed to test oil pump pressure and check operation of fuel system components. Compare the measured pressure value to the standard reference range from manufacturer, we can take quick and accurate diagnosis and feasible solution on the oil pipeline leakage and engine wear, so as to confirm if the oil pressure gauge has been damaged. No more reliance on the dashboard light..
  • Oil Pressure Tester: The petrol engine cylinder tester kit has a shockproof rubber casing and a large clear dial with readings from 0~140 psi and 0~10 bar for easy and accurate work on both American and metric systems. Keeping the gauge safe from bumps and drops. Built-in hose assembly also comes with a side pressure relief button for instant pressure reset and no repeated hose disconnect, and 4 ft long flexible hose with convenient quick coupler for simple adapter installation and removal..
  • Durable Construction: 11-piece metal adapters are all made with heavy-duty forged steel and brass hardened for maximum strength and longevity.
  • designed to withstand extreme pressure in any situation for professional use. Each thread adapter marked with number, features black oxide finish to resist rust and corrosion.
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

VMV-1 Digital Vacuum Gauge,0-30000 Microns Range, 2% Accuracy, 7/16-20UNF Interface

  • 【Measuring Range】 The dual scale pointer pressure gauge uses three times the scale (PSI / Bar / KPa) to measure pressure, does not require batteries, and can meet your different needs. Measuring range: 0-300psi, 0-2000kpa, 0-20bar..
  • 【Accurate Measurement】 The dual-scale pointer pressure gauge can measure pressure without a battery. Good airtightness ensures accurate pressure measurement. The transparent dial cover and pointer display dial make reading more convenient..
  • 【Application】 The pressure gauge is an excellent pressure measuring tool with stable performance, which can be used to measure the pressure of water, oil, natural gas, and liquids. Stable performance, high reliability, easy to use and practical..
  • 【Size】 The pressure gauge measures approximately 11.3 x 9 x 3.2 cm/4.4 x 3.5 x 1.3 inches and weighs approximately 188 grams/6.6 ounces. Small size and easy to carry..
  • 【Easy to Install】In order to maintain the normal performance of the overflow hole, please leave a space of at least 10mm behind the work surface. Do not modify or block the overflow hole..
Check Stock

Pressure Gauge Back Connection, 1/4 BSPT Pressure Gauge Pressure Gauge Water Pressure Gauge, 50mm for Air Water Oil Gas(0-300psi 0-20bar)

  • 【Applicable】This car oil pressure gauge has high accuracy and high sensitivity and can be universally installed on most 12-volt vehicle.
  • 【Function】This oil pressure gauge can measure car oil pressure. It is a professional and practical oil pressure gauge with high sensitivity and easy operation.
  • 【High Performance】The backlight on the oil pressure gauge dial is easy to read in the dark. High-speed stepper motors respond faster than normal oil pressure gauge.
  • 【Easy to Use】This oil pressure gauge is simple to install and does not require complicated tools. It has a 7-color LED display, using buttons to switch colors, simple and convenient.
  • 【NOTE】Please refer to the description for detailed product parameters..
Check Stock

GlowShift Replacement 2 Post Oil Pressure Gauge Sensor Sending Unit 1/8-27 NPT Thread

  • Replacement Electronic 0-100 PSI Oil Pressure Gauge 2 Post Sensor Sending Unit.
  • Compatible with GlowShift 7 Color Series Oil Pressure Gauge - Previous Model (GS-T704, GS-C704, GS-W704).
  • Compatible with GlowShift 10 Color Digital Series Oil Pressure Gauge - Previous Model (GS-TCD04).
  • Compatible with GlowShift Tinted Series Oil Pressure Gauge (GS-T04).
  • Compatible with GlowShift Blue & Red Digital Series Oil Pressure Gauge (GS-BD04, GS-RD04).
Check Stock

BACOENG Complete AC Repair Tool Kit for Mini Split/HVAC/AUTO with Tool Bag - Includes 3.6CFM Vacuum Pump, 800PSI Manifold Gauge Kit

  • 【Complete Kit】-an complete refrigerant injection kit for MINI/HVAC/AUTO AC system, with a large-capacity tool bag that can carry all the accessories needed at one time..
  • 【Manifold Gauge】-You could directly read the temperature(℉) and pressure(psi) of R12/R22/R134a/R410a refrigerant on the professional dial. This gauge could be hung on the car/air conditioner cover or other high places through the top hook, freeing your hands for more works..
  • 【Heavy Pressure Hose】-with three high-strength pressure hoses, red for high-pressure pipes, blue for low-pressure pipes, yellow for vacuum pumps.
  • 5FT long for each one, 1/4 SAE to 1/4 SAE, 800 PSI working pressure.
  • 【Powerful Vacuum Pump】-It delivers 3.6 CFM flow rate and 150 Micron vacuum with low noise, which guarantees the vacuum steady of the system. It also make your work moveable and easy to start on its design of handle and manual switch. Motor thermal protection equipped..
  • 【Package include】-Vacuum pump*1 (with vacuum oil*1), manifold gauge*1, Pressure hose*3, car quick couplers*2, 5/16 SAE-....
Check Stock

Goplus 1/3HP 4CFM Single Stage Rotary Vane Vacuum Pump and R134a Manifold Gauge Set, HVAC A/C Refrigeration Kit, Including Vacuum Pump, A Bottle of Vacuum Pump Oil, Suitable for R12, R22, R134

  • ... 【Three-Color Coded Hoses】There are yellow, blue, and red hoses, each equipped with brass fittings. The fittings are 45 degrees on one hand and straight on the other, providing a leak-proof seal. The three hoses are 36" in length. All hoses comply with the SAE-J2196 standard. The working pressure of the hoses is 800PSI - 4000PSI and its acceptable refrigerant are CFC, HCFC, and HFC..
  • 【A Complete Refrigerant Tool Kit】This tool kit is a complete set for Mini-split/ HVAC and AUTO AC refrigerant recharging, including a vacuum pump, a pressure gauge set, 3 multicolored hoses with length of 36", 2 adjustable quick couplers, 2 adapters, a bottle of vacuum pump oil, a manual for pump and gauge and a portable suitcase..
  • 【Pump Oil and Portable Case】The vacuum pump features a simple oil fill port for a clean pour and oil drain plug positioned beneath the oil reservoir. The spillage meter will help to ensure the proper level of oil. There is a portable case for gauge, hoses, and other accessories allowing you to put them in order and carry them easily..
Check Stock

EXELAIR by Milton FRL Air Filter Regulator and Lubricator System - 1/2 NPT - Metal Bowl Automatic Float EX45FRL40A-04M

  • FRL Air Filter Regulator Lubricator System: Removes water/particles, protects air tools, prevents overdrying tools. Provides adjustable pressure, continuous oil supply, and extended air tool life..
  • Cast aluminum body. Locking adjustable pressure knob. Dial pressure gauge. Rotating flow dial. Easy-access oil fill cap. Automatic/Manual full-time fluid drain. Push-to-connect drain tubing connection to channel water safely..
  • Metal Bowl w/Sight Glass: Indicates fluid level. Filter Bowl Capacity: 7.4 OZ. Lubricator Bowl Capacity: 4.56 OZ..
  • 1/2" inch national pipe threads on both inlet/outlet. Dial gauge scale range: (0 to 160 PSI, 0 to 1.1 MPa). Adjustment range: 5-120 PSI..
  • Max Air Flow: 140 CFM. Max operating pressure: 145 PSI. Temperature range between 25°F and 140°F or -5°C and 60°C..
Check Stock

FavorCOOL Vacuum Pump and Manifold Gauge Set,3.6 CFM 1/4 HP Single Stage Rotary Vane Vacuum Pump, HVAC Air Conditioner Refrigerant for R134a R410a R22 Systems, Vacuum Pump Automotive

  • ...m any oil vapors, limiting contamination and providing safer operation..
  • 【HVAC GAUGE READING】The HVAC service gauge set is great for diagnosing and repairing AC systems. Ideal use for R22, R134a and R410a, our charging hoses are made by 100% Virgin Teflon Diaphragms with highest industry standards, fits the high pressure requirements for charging R410A, Working Pressure 800psi, Brust Pressure 4000psi. Much higher and safer than most other products on markets..
  • 【Convenient To Operate】FavorCOOL vacuum pump features a simple oil fill port for a clean pour, and the oil window provides you with vital information like oil level and oil quality.
  • The oil drain valve at the bottom ensures faster and more thorough emptying.
  • 1 bottle of 300ml vacuum oil is also included.
  • 【PACKAGE INCLUDED】Multicolored set of three 3-layers hoses, Manifold Gauge Set, Vacuum Pump Oil Bottle, Accessories of Quick Couplers and ACME Adaptors, Ready-to-Work Full Complete Tool Kit.
Check Stock

Oil Pressure Gauge Adapter, 1/8in NPT Female to M10x1.0 Male Reducer Oil Pressure Gauge Adapter Replacement Black

  • [ IMPORTANT ] VMS RACING Brand Design (NOT generic). Comes in VMS RACING Branded BOX. Brand New in Box / Never Used / Never Installed..
  • High Quality Silver Face 0-60 Psi Triple Chromed Oil Pressure Gauge with TWO Triple Chromed Plated Fittings and O-ring included to match the gauge and for a long-lasting finish. EVERYTHING IS TRIPLE CHROMED... EVEN ALL OF THE FITTINGS so you will NOT see any brass . Beautiful finish to compliment your most prized Harley. PERFECTLY DRESSED FOR ANY OCCASION. If you have other nice chrome pieces on your ride, this gauge will feel right at home and a must-have..
  • Measurements: Gauge face (w/ bezel) - 1.66" (42.25mm) Gauge Case - 1.62” (41mm) Gauge Depth ~ 1” (25mm) Fitment: Fits (70-84 Shovelhead) (84-99 Evolution) and (38-69 & 84-91 Big Twin Models) Engines ONLY. Fittings allow for a FLAT MOUNT (or) 45 Degree Mount depending on the application. Triple-chromed / Brass INTERNALS. 1/8 NPT main Male Fitting.
  • VMS RACING Oil Pressure Gauge Kit Provide you with a MORE ACCURATE OIL PRESSURE READING than Liquid Filled Oil Pressure Gauges. Liquid Filled Gauges tend to lose the liquid due to Engine Vibration. You eliminate that problem with this gauge. This Kit allows for accurately measuring Oil pressure in your Big Twin Engine. ....
Check Stock