Reviews Oil Filter For 3 Vortec

M295 Standard Volume Oil Pump - Compatible with 4.8L, 5.3L, 6.0L Chevy Silverado, Suburban, Tahoe, Trailblazer, GMC Sierra, Yukon, Cadillac Escalade - Replace M295, 12696357, 12586665

  • ...t and pistons of an engine. A failed oil pump will cause low oil pressure, engine overheat, and unusually noise from the engin. If you notice any of the symptoms, you will need to have your oil replaced..
  • FIT THE FOLLOWING VEHICLES - Standard volume & standard pressure oil pump compatible with 4.8L 5.3L 5.7L 6.0L GM Vortec V8 engine oil pump, induding Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier, model year 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020..
  • REPLACE PART NUMBER - Replace GM 12696357, 12586665 oil pump, replace Melling M295 oil pump. Commonly found on Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier with 4.8 5.3 5.7 6.0 V8 Vortec Engine..
  • OEM DESIGN & DIRECT FIT - Quality materials & advanced technology used, meets or exceeds OEM standards. Even though this is not a genuine GM or Melling oil pump, but it works even better and lasts longer. Save yourself times and money by replacing oil pump yourself..
  • WHAT YOU'LL GET - 1 * Oil Pump & 12 Months Warranty. If you have....
Check Stock

High Volume Oil Pump Replacement - Compatible with 4.8L 5.3L 6.0L Silverado, Suburban, Tahoe, Trailblazer, GMC Sierra, Yukon, Cadillac Escalade - Replace M295HV

  • ...LACEMENT HIGH VOLUME OIL PUMP - If you have an engine that can rev beyond 6,000 RPM or higher, a high performance or high volume oil pump would probably be a good upgrade and provide added lubrication insurance..
  • FIT THE FOLLOWING VEHICLES - High volume & high pressure oil pump compatible with 4.8L 5.3L 5.7L 6.0L GM Vortec V8 engine oil pump, induding Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier, model year 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020..
  • REPLACE PART NUMBER - Replace GM 12696357 12586665 oil pump, replace Melling M295HV oil pump. Commonly found on Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier with 4.8 5.3 5.7 6.0 V8 Vortec Engine..
  • OEM DESIGN & DIRECT FIT - Quality materials & advanced technology used, meets or exceeds OEM standards. Even though this is not a genuine GM or Melling high volume oil pump, but it works even better and lasts longer. Save yourself times and money by replacing high volume oil pump yourself..
  • WHAT YOU'LL GET - 1 High Volume Oil Pum....
Check Stock

LS Oil Galley Diverter Restrictor Barbell Engine Block Plug Compatible with all GM Chevy 1997-2014 LS Series Engines LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 4.8L 5.3L 5.7L 6.0L 6.2L Vortec

  • Replace your old worn-out LS Oil Passage Diverter to prevent oil seepage or oil bypassing the oil filter. This is also a part that is overlooked when reassembling an engine which will cause little to no oil pressure resulting in engine failure..
  • Compatible with ALL Chevrolet GM LS Series Engines 1997-2014 (99-2013 4.8L,5.3L,6.0L,6.2L Vortec Truck Engines) LS1, LS2, LS3, LS6, LS7, LS9, GM 4.8L 5.3L 6.0L 6.2L. Also Fits LSX LM7 LR4 LQ4 LQ9 L33 LH6 L92 L76 L99 L96 L82 L83 L84 L86 L87 Engines..
  • This installs in the oil galley hole behind the rear engine cover on the rear of the engine on the driver side. Non-O-ring end goes into block 1st. If you are not sure if your rebuilt or fresh rebuild with little or no oil pressure is missing this, you can remove the rear threaded oil galley plug above the oil filter location and see if you can see the shaft of this barbell through the hole. Comes with 1ea oil passage barbell..
  • We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce..
  • When you purchase Z Whip Parts you will always get the highest quality for you....
Check Stock

Speedway Motors Chrome 1987-Up Small Block Fits Chevy Centerbolt Valve Covers, 1-Hole

  • For 1987-up heads and Vortec style SBC heads.
  • 1-hole per cover with separate oil fill and PCV holes.
  • Holes are 1 1/4" with baffles. Grommets are NOT included.
Check Stock

Universal Oil Filter Wrench Adjustable 3 Jaw Oil Filter Removal Tool Range 2-3/8 to 3-7/8 inch with 1/2'' Adapter 3/8'' Square Drive Socket

  • Universal Tool - This oil filter removal tool fits oil filters ranging from 60mm to 98mm (Oil filters Range 2-3/8 inch to 3-7/8 inch). A removable 3/8-inch reducer is available for larger clearance and can be used with a 3/8-inch square drive tool..
  • 3 Jaw Design - Eastyard "claw" type oil filter wrench, ensures, with it's 3 Jaw grip, a more firm hold on the oil filter. Claws fits tighter as more torque is applied..
  • High Performance Material - 3 jaws adjustable oil filter wrench are crafted with top grade steel structure, which provides the advantage of durability and wear resistance. Finished with black-oxide coating to resist rust & corrosion..
  • Compact Design - This car filter oil change tools provides a low clearance, helping users dislodge filters even in tight spaces..
  • Bonus Gift - The oil filter wrench set includes 1/2”-3/8” drive adapter that can fit 1/2 and 3/8 inch square driver ratchet which can meet different demand..
Check Stock

Xtensi Engine Oil Cooler and Oil Filter Housing Adapter Assembly Compatible With 2011-2013 Jeep, Chrysler 200/300,Dodge Journey Charger Caravan 3.6L Aluminium, Replaces 5184294AE

  • Oil Filter Housing Adapter is not a genuine part, it is a direct replacement and will fit, work and look exactly like the factory part. Replace Part Number: 5184294AE. Please check the part number before purchase..
  • Only for 3.6L 6 cyl engine. Compatible with 6 cyl 3.6L engine 2011-2013 Chrysler 200, 2011-2013 Chrysler 300 V6 3.6L, 2011-2013 Chrysler Town and Country V6 3.6L, 2011-2013 Avenger V6 3.6L, 2011-2013 Challenger V6 3.6L, 2011-2013 Charger V6 3.6L, 2011-2013 Journey V6 3.6L, 2011-2013 Caravan V6 3.6L, 2011-2013 Durango V6 3.6L, 2011-2013 Grand Cherokee V6 3.6L, 2012-2013 Wrangler V6 3.6L, 2013 Ram 1500 V6 3.6L, 2012-2013 Ram C/V Base V6 3.6L..
  • Advantage: Keep the engine oil clean and cool. This replacement oil cooler housing comes with a new pre-installed oil filter, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean. Beside that, it also cool down the oil that enters the engine. Direct replacement. Fluorocarbon and HNBR sealing rings are resistant to oil, abrasion and temperature..
  • The oil cooler is made of lightweight aluminum alloy, has 16-plate (8 plate thick and 8 plate thin), can be better cooling. Oil filter housing adapter oil cooler kit comes with a complete set of ....
Check Stock

OEMTOOLS 25101 3-Jaw Adjustable Magnetic Oil Filter Wrench, Oil Filter Wrench Small, Oil Filter Wrench Adjustable, Black and Green

  • APPLICATIONS GALORE: This adjustable oil filter wrench removes oil filters on many domestic and foreign light trucks and passenger vehicles, as well as motorcycles and lawnmowers.
  • EXTRA GRIP: Our oil filter puller includes a magnetic base attachment that keeps the oil filter remover securely in place while you remove filter caps.
  • VERSATILE: This auto adjustable oil filter wrench fits filter sizes between 2.4 to 3.6 inches (60MM to 93MM).
  • HOLD ON TIGHT: Our adjustable filter wrench features spring-loaded jaws for a more secure grip than the average oil filter claw wrench.
  • DON'T GET STUCK: Working in tight areas is hard enough without stuck on filters.
  • This compact adjustable oil filter removal tool removes tough filters in tight spaces.
Check Stock

Mopar 82215366 Front End Cover Jeep Gladiator Wrangler W/ Diesel Engine

  • Replacement Engine Oil Filter - The engine oil filter is designed to protect and capture harmful contaminants like carbon, sand, dust, and bits of metal that circulates into your engine. It filters the oil to prolong its life and to provide long lasting engine protection..
  • Compatible Replacement for Jeep & Ram Diesel 3.0L Vehicles - 2021 Gladiator 3.0L | 2020-2021 Wrangler 3.0L | 2020-2021 1500 3.0L | It is important to have clean motor oil because dirty oil can wear the oil pump’s machined components and damage the bearing surfaces in the engine. The oil filter helps remove pollutants from your car engine’s oil that can accumulate over time..
  • Replaces Part# 68507598AA, 68498720AA commonly found on popular Gladiator, Wrangler or 1500 models including year models 20, 21. If you are experiencing acceleration problems, metallic noises under the hood or low oil pressure your oil filter might need to be replaced..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and will look, fit and work exactly like the factory part. Oil filter should be replaced every time the oil ....
Check Stock

JDMON Universal Adjustable 3 Jaw Oil Filter Wrench Remover Tool for Removing Oil filters Range 2.4 inch from 3.8 inch in Diameter Include 1/2”-3/8” and 1/4”-3/8” Drive Adapter

  • Adjustable Fit: The oil filter wrench can remove the oil filter from 2-1/4 inch to 3.8 inch(60mm-95mm) ,fit 1/4 & 1/2 inch square driver ratchet or 3/8 inch wrench which can remove various models of vehicles..
  • High Hardness Material: The oil filter wrench is made of carbon steel which is much stronger than normal material and more durable and handy to remove oil filter.
  • 3 Jaw Design: The tool is designed 3 jaw anti-drop design with firm hold on filter, helping users remove filters quickly, with less slip and without hassle. Claws fit tighter as more torque is applied..
  • Compact Design: This oil filter remover provides a low clearance, helping users dislodge filters even in tight spaces..
  • Added 2 Drive Adapter : Not only the oil filter wrench, but also 2 pcs Drive Adapter are included in box to provide the extra Drive for your oil filter.
Check Stock

TOYOTA Genuine OEM 00279-0WQTE-01 Oil (4 QUARTS)

  • STRONG AND DURABLE: This oil filter wrench is made of high-quality aluminum alloy, ensuring strength and durability. The surface of the oil filter cap removal tool is treated with a high quality black anodized finish, anti-rust and anti-corrosion to prolong the service life of the tool..
  • APPLICATION: Install the 64mm 14 flute cup style oil filter wrench on the filter cover, it can clamp and provide maximum torque with multiple contact points to rotate the extremely tight oil filter cover, and cooperate with a 27mm socket or 3/8” (10mm)drive ratchet wrench to loosen it..
  • APPLICABLE MODELS: Oil filter cover removal tool is suitable for most car models, such as Toyota, Lexus, RAV4, Camry, Tundra, Highlander, Sienna and More vehicles equipped with 2.5L to 5.7L engine that that use Toyota's cartridge style oil filter system. But the filter wrench does not fit the car with disposable conventional spin-on filters and 1.8L engine oil filter cap..
  • DESIGN: The bottom edge of the oil filter wrench has 4 slots for a perfect match with the vehicles using 15620-31060, 15620-36010, 15620-36020 oil filter housing covers. The tooth-like s....
Check Stock

2Pcs Universal 12 Inch Oil Filter Pliers 2-1/2 to 4-1/2 Inch and Adjustable 3 Jaw Oil Filter Wrench 2-1/8 to 4-1/2 Oil Filter Change Removal Tool Set

  • Package Include - The oil filter wrench set includes a 12 inch long handle grip pliers, and an adjustable 3 jaw 2 way oil filter wrench removal tool for install oil filters and remove..
  • Oil Filter Plier - The long handles plier has a 12 inch long handle, the max jaw open is about 2-1/2 to 4-1/2 inch(63.5 to 115mm), with right angle teeth for grip and a 3-position slip joint design for quickly adjusts to size. Good for almost all of your family vehicles..
  • 3-Jaw 2-Way Oil Filter Wrench - This adjustable oil filter removal tool manufactured from durable carbon steel and is made specifically to be used to remove oil filters ranging from 2-1/8 inch to 4-1/2 inch (54-116mm).
  • The wrench Set are made of hardened steel, high hardness and strength. After drop forged, heat treated steel with rust-resistant finish, durable enough for long time service..
  • Universal Tool - This oil filter wrench remover tool set would help you do the job easily. Recommended for most common size car and stuck engine oil filters. As long as the filter is not too small, it will remove most filters..
Check Stock

Aluminum Engine Oil Cooler Oil Filter Housing Adapter Assembly 926-876 With Gaskets Sensor Compatible With 2011-2016 Chrysler 200 300, Dodge Charger, Grand Cherokee, Promaster 3.6l V6 68105583AF

  • ...e solves the defects of fracture and oil leakage caused by the plastic casing used in the original product of the older generation. More durable, prevent oil leakage, prevent corrosion, protect the engine, longer service life..
  • 【Compatibility】Engine aluminum oil cooler filter Assembly is replacement for 68105583AF, Compatible with V6 3.6L engine 2011-2016 Chrysler 200/300, V6 3.6L 2014-2016 Chrysler Town&Country,V6 3.6L 2011-2014 Dodge Avenger,V6 3.6L 2011-2016 Dodge Challenger,V6 3.6L 2011-2016 Dodge Charger,V6 3.6L 2011-2016 Dodge Durango,V6 3.6L 2011-2016 Dodge Grand Caravan,V6 3.6L 2014-2017 Dodge Journey,V6 3.6L ,2013-2016 Ram 1500,V6 3.6L 2012-2013 Ram C/V,V6 3.6L 2014-2016 Ram Promaster 1500/2500/3500 and V6 3.2L..
  • 【Replaces Part Number】926-876，926-959，68105583AF，68105583AE ，68105583AA，68105583AB，68105583AC，68105583AD..
  • 【Direct Fit】This aluminum oil filter adapter housing assembly is designed to MEET or EXCEED standards of original factory Engine Oil Filter Adapter. Guaranteed Exact replacement for PLUG & PLAY. Manufactured from quality materials, 100% tested before shipping..
Check Stock

FRAM HM3600 High Mileage Oil Filter

  • VEHICLE APPLICATIONS: 2002-2008 Dodge 3.7L.
  • 1994-2009 Ford Edge/Mustang (3.5L, 3.8L, 3.9L).
  • 1997-2008 Ford F150/F250 (4.2L, 4.6L, 5.4L).
  • 1986-2007 Ford Taurus (3.0L, 3.2L, 3.4L, 3.5L, 3.8L).
  • CONSTRUCTION: The Castrol oil filter comes with synthetic media, a silicone anit-drainback valve, and metal endcaps to meet your performance filter needs when paired with either conventional, semi-synthetic, or synthetic motor oil..
  • PERFORMANCE: This Castrol oil filter is designed for peak performance for up to 20,000 miles when paired with an equivalent 20,000-mile motor oil..
  • This product is proudly MADE IN THE USA!.
Check Stock