Reviews Oil Drum Mould

Ingot Mold Silver Ingot Mould Gold Casting Ingot Crucible Mold for Melting Casting Refining Gold Silver Metal Aluminum Copper Brass

  • 8" Ingot Mold Mould is equipped with a wooden handle, which is safer to use..
  • 8" iron Ingot Mold Mould, more durable than graphite crucible..
  • There are three iron blocks, you can easily adjust the capacity of Ingot Mold Mould..
  • You can apply release agent or some oil before use, so that it can be released easily..
  • If our products have any problem, pease sontact us,we promise to help you within 24hrs..
Check Stock

Aluminum 15 to 55 Gallon Drum Pump Rotary Hand Liquid Transfer Heavy Duty Rotary Barrel Pump Hand Drum Pump for Kerosene Gasoline Oil Fuel Diesel Hydraulic Fluid

  • Hand Drum Pump: The overall height of the pump is 51inch, the length of the oil outlet pipe is 39 inch, and the inner diameter of the oil outlet is 1.1" (28mm). oil outlet pipe can be adjusted to fit 15 to 55 gallon drums. Tip: only for oils. Note: Do not use it to pump water,it is not suitable..
  • Quality Aluminum: Our drum pump is made of high-quality all aluminum material, which is highly anti-corrosion and anti-rust, durable and lasts longer. Our 55 gallon drum pump supports clockwise transfer handle instead of counterclockwise transfer handle..
  • Applicable Type of Oil: Extractable liquid: Diesel oil, kerosene, engine oil, hydraulic oil, Gear oil, edible oil (but not edible grade). Liquids that cannot be extracted: Gasoline, water, urea, acid-base liquid, corrosive liquid, chemical liquid, edible liquid, etc. cannot be extracted..
  • Great Filter: Our hand liquid transfer drum pump distribution has a fine filter. You only need to install it at the bottom of the suction tube, which can effectively separate the oil dirt and oil, so as to ensure that pure oil is pumped..
  • Good Sealing: 3 piece segmented suction tube, easy to adjust the length of suction tube according to the actual situation, and easy to store and carry at the same time.suction tube with screw....
Check Stock

3D Birthday Cake Pan Car Shaped Aluminum Nonstick Baking Pans Tins Cake Decorating Mould Birthday/Wedding/Anniversary/Party Cake Pans Bakeware Tools

  • The First Use Method of Newly Purchased Products Must Be First Soaked in Water, Then Dried with a Soft Cloth, and the Inner Wall is Wiped with Edible Oil..
  • Made of Food-grade Aluminum Alloy ,3D Mould, Durable, Transfer Heat Fast and Evenly, The Surface of Mould Has Gone Tthrough Anode Oxidation Resistant, Safety, Healthy,Lightweight, Demold Easily , Quick Release Non-stick Finish Allows You to Remove Your Freshly Baked Cake without Damaging It..
  • This Cake Pan Mould is Big Enough to Make a BIG Cake on Birthday, Halloween and Christmas Party etc. Other Major Festivals Safely & Easily..
  • Operating Temperature: -40 + 220°C .Refrigerator and Freezer Safety, Oven and Microwave Safety..
  • Notice Cleaning Method: Handwash Best，Do Not Wash in the Dishwasher..
Check Stock

3D Birthday Cake Pan 8inch Large Half Round Shape Aluminum Nonstick Baking Pans Tins Cake Decorating Mould Birthday/Wedding/Anniversary/Party Cake Pans Tins Bakeware Tools

  • The First Use Method of Newly Purchased Products Must Be First Soaked in Water, Then Dried with a Soft Cloth, and the Inner Wall is Wiped with Edible Oil..
  • Made of Food-grade Aluminum Alloy ,3D Mould, Durable, Transfer Heat Fast and Evenly, The Surface of Mould Has Gone Tthrough Anode Oxidation Resistant, Safety, Healthy,Lightweight, Demold Easily , Quick Release Non-stick Finish Allows You to Remove Your Freshly Baked Cake without Damaging It..
  • This Cake Pan Mould is Big Enough to Make a BIG Cake on Birthday, Halloween and Christmas Party etc. Other Major Festivals Safely & Easily..
  • Operating Temperature: -40 + 220°C .Refrigerator and Freezer Safety, Oven and Microwave Safety..
  • Notice Cleaning Method: Handwash Best，Do Not Wash in the Dishwasher..
Check Stock

Jewelry Oil Groove, Reversible Jewelry Ingot Wire Mould Oil Groove Mold Making Tools for Sheet Bar Gold Silver Casting Chisel

  • REVERSIBLE:The Ingot Mould is reversible, so it can be used on making bar and sheet. Make your own size bars etc, highly useful for rolling sheet/wire on a rolling mill.It is detachable, easier for you to check and clean..
  • VARIOUS DIAMETERS ARE AVAILABLE:This Jewelry Making Chisel has various kinds of bar's diameter can be made - 8mm, 6mm, 5mm, 4mm.Therefore, it can largely meet your different needs. And the depth of mould is 61mm, the height of bar is about 60mm.
  • CONVENIENT AND PRACTICAL:With the Wooded handle, the clamp is included,it's exceedingly easy and comfortable to hold. This Jewelry Oil Groove generally widely used in Jewelry's areas..
  • MATERIAL：This Jewelry Mold is made of high-grade Iron and its sturdy and durable and has a long service life. Especially perfectly apply for making ingot from scrap gold and silver..
  • PACKAGE LIST:This mold package list 1 * Jewelry Ingot Mould. Size: Approx. 20 * 8 * 8cm / 7.87 * 3.15 * 3.15inch, Weight:1375g.
Check Stock

BISupply Brass Drum Faucet 3/4 Inch - 55 Gallon Drum Spigot Drum Nozzle 55 Gal Drum Spout for 2000 SSU Viscous Liquid

  • [Dispense Viscous Liquids]: The BISupply 3/4 Inch Brass Drum Tap 55 Gallon Barrel Spout allows for easy dispensing of viscous noncorrosive flammable liquid such as automotive coolant, adhesive, paint, or heavy oil above 2000 SSU (approximately 30W oil).
  • [Use Your Drum]: 3/4-Inch NPT thread size fits most barrels and is compatible with 2-inch viscous liquids valve (sold separately by BISupply).
  • [Built to Last]: Barrel faucet kit constructed from brass for maximum strength and longevity.
  • Polytetrafluoroethylene O-ring (PTFE) seal.
  • [Prevent Fire Flashback]: Internal flame arrester prevents flashback of fire into your drum.
  • [No More Leaks]: Screw tightly into drum and can be adjusted to dispensing position (with spout downward) without damaging threads or causing leakage.
Check Stock

TERA PUMP Portable Power Water / Fuel Transfer Battery Pump with Auto-Stop Sensor ( 2.4 GPM )

  • Upgrade 55 Gallon Drum Pump: 32mm Larger Oil outlet tube diameter for quicker oil transfer, Oil outlet pipe length 39 Inch, Overall Length 51 Inch, that can be adjusted to fit 15 - 55 gallon drums..
  • Heavy Duty Barrel Pump: Constructed with Aluminium alloy Steel, heavy duty & rugged, anti-corrosion and anti-rust for more durability..
  • Leak-Free Oil Pump: Our barrel pump is consisted of 3 piece segmented suction tube with screw thread, good sealing effectively prevent oil leakage..
  • Easy to Use Hand Pump: Great Filter at the bottom of the suction tube separate the oil and the oil dirt effectively. Hand Drum Pump Flow Rate 200-250ML (About 16 GPM ) . Support clockwise direction rotary..
  • Widely Used: This rotary barrel pump is suitable for pumping gasoline, kerosene, oil, diesel, hydraulic fluid lubricating oil, other non-corrosive liquids, NOT use for water!.
Check Stock

DIY Lipstick Mold with Lipstick Stripper, 2/4/6 Cavities 12.1 DIY Lipstick Mold Aluminum Alloy Rose Gold Dual Uses Lip Balm Maker Tool (6 Holes)

  • LIPSTICK MOULD STRIPPER: Made of high-grade quality aluminum alloy, which is safe, environmental and durable for long term use. Suitable for 12.1mm diameter lipstick mould. It is used for lipstick mould.
  • DIY LIPSTICK MOLD: With that DIY lipstick mold, you can modulate colors you like, and ingredients are safe and assuring. High gloss and fine grinding, easy to eject of the lipstick. You can do sandwich lipsticks, double color lipstick etc.
  • BEST GIFT: Ideal Birthday Gift, Christmas Gift, Thanksgiving Gift, Novelty Gift or Wedding Registry Gift for your wife or girlfriend.
  • USAGE: Pour liquid lipstick into the mold, wait for 30 minutes, or put it into refrigerator or 20 minutes, so that liquid can be cooled to solid. Use the exit lipstick mold to take it out.
  • WARM TIP: During first use, please soak it in olive oil for 1-2 hours, and then wipe the mold with cotton swabs to keep it dry. It can not be forcibly wiped or wiped by hard objects, or it is easy to make the mold blacken.
Check Stock

Evans Hydraulic Black Drum Head, 14 Inch

  • 14" drum head with a thin layer of oil between two plies of blue film to suppress unwanted overtones.
  • Durable enough to withstand heavier playing.
  • The only oil-filled drum head on the market.
Check Stock

Evans Hydraulic Blue Snare Batter Drum Head, 14 Inch

  • 14" drum head with a thin layer of oil between two plies of blue film to suppress unwanted overtones.
  • Durable enough to withstand heavier playing.
  • The only oil-filled drum head on the market.
Check Stock

Evans Black Hydraulic Bass Drum Head - 22 Inch

  • 22" drum head with a thin layer of oil between two plies of black film to suppress unwanted overtones.
  • Two plies offer consistency and durability for longer playing time.
  • A fat, deep and short sound pioneered by early 70's rock and roll.
  • Also available in clear (also called glass) and blue versions.
  • The only oil-filled drum head on the market.
Check Stock

Silicone Planter Mold for Concrete Flower Pot Making, Square DIY Succulent Plant Cactus Planter Pot Mould, Homemade Cement Flowerpot Molding Tool (Type B - 12CM)

  • ...ts Mold are consists of ABS plastic hard shell frames and Silicone Inner material. Sturdy outer shell to support concrete weight without wall bulging outwards.
  • 2. The model is used to make Plant pot/ Flower pots/ DIY Flower Pot Model/ planter pot model or some other decorations.
  • 3. Smooth surface, easy to demold (demould need 24-36 hours)/ clean and re-use. (Note: If to make flower pot, please use Cement or concrete)..
  • 【Square Mini Flower Pot Silicone Mould】- 1. Type A (10 CM): Mold Size about 11.2x11.2x10.5cm/ 4.4x4.4x4.13inch (LxWxH), Flower Pot Finished product size: 10x10x10cm/ 3.9x3.9x3.9inch (LxWxH).
  • 2. Type B (12 CM): Mold Size about 15.5 x15.5x12.3 cm/6.1x6.1x4.8 inch (L x W x H), Finished Product Size: About 12x12x12 cm/ 4.7x4.7x4.7 inch(L x W x H). Perfect for small green leaf plant/ succulent/ Cacti and other mini size plants. DIY Flower Pot Model, add the happy feeling in daily life..
  • 【Multi-usages Flower Pot Making Molds, DIY Silicone Planter Molds for Concrete Succulent Pots Making】- 1. This mold can be used to as cement/ concrete/ clay/ plaster/ polyester resin molding tool, to make succulent planters or containers.
Check Stock

GIXAA Portable Electric Winch 2000 Lbs Chain Drum Clamp Lifter Barrel Lifting Device Sling with Lifting Chain Alloy Steel for Hoisting Drums Barrels Heavy Duty Towing Winch

  • MAXIMUM LOAD CAPACITY 2000LBS The vertical drum sling is designed to lift 30gallon and 55gallon drums with a top lid It features a large load capacity which can lift oil drums up to 2000 lbs, reducing labor burden and improving working efficiency..
  • RELIABLE STEEL CONSTRUCTION & ORANGE The barrel lifting sling is made of low carbon alloy steel with orange powdercoated to resist rust and chemical damage The professional G80 lifting chain and durable top lifting ring greatly improve safety performance and extend service life.
  • SPRINGLOADED LATCH EASE OF USE The thickened jaw is designed with a springloaded latch for a securely grasping The barrel lift works great with forklifts or cranes 272inch lifting distance is effective for lifting oil drums in different designs Top Ring Size: 3.7 x 2.6 inch. Jaw distance: 0-1 inch..
  • APPLICABLE LIFTING TYPE- Our chain drum lift is designed to lift and transport steel or plastic oil drums by vertical hoisting, horizontal hoisting, inclined hoisting, and double bucket hoisting. It is lightweight for easy transportation and store. Package Weight: 3.5 kg/7.7 lbs..
  • WIDE APPLICATION- The steel drum hoist is widely used in the chemical industry, shipment, metallurgy, mining, and other places, designed for easy drum lifting and....
Check Stock