Reviews Oil Drill Pipes

Big Gator Tools BGT V-4 Pack V-Drill Guide SAE + Number Hole Sizes 4pc Kit

  • Includes: (1) STD500NP, (1) STD1000DGNP, (1) STD2000DGNP & (1) SDGMINI.
  • Special nickel alloyed steel heat treated for durability. Non-plated material with light oil coating to prevent rust..
  • Centers the holes on pipes, dowels & outside corners. Flat side allow 90° drilling into flat surfaces-just clamp and drill.. Automatically squares up the drill with the surface. Alignment marks on both sides, to line up on center..
  • Bottom surface is precision ground to ensure stability & accurate perpendicular alignment on flat surfaces. Round stock hole alignment marks on one side..
  • Prevents drill bit wander. Portable, pocket-sized and housed in a handy plastic storage case w/surface ridges to prevent opening, PegBoard-Friendly. Only shipping one of each V-Drill Guides "NO" other tools or ruler included.
Check Stock

Big Gator Tools STD Series 3PC V-Drill Guide w/35 SAE Hole Sizes 1/8' - 5/8' 3PC Set

  • Includes: (1) STD500NP, (1) STD1000DGNP & (1) STD2000DGNP Special nickel alloyed steel heat treated for durability. Non-plated material with light oil coating to prevent rust..
  • Centers the holes on pipes, dowels & outside corners. Flat side allow 90° drilling into flat surfaces-just clamp and drill..
  • Automatically squares up the drill with the surface. Alignment marks on both sides, to line up on center..
  • Bottom surface is precision ground to ensure stability & accurate perpendicular alignment on flat surfaces. Round stock hole alignment marks on one side..
  • Prevents drill bit wander. Portable, pocket-sized and housed in a handy plastic storage case w/surface ridges to prevent opening, PegBoard-Friendly..
Check Stock

8 Pcs Swaging Tool Drill Bit Set HVAC Repairing Set Air Conditioner Manual Copper Pipe Swage Tube Tool with Copper Pipe Cutter and Deburring Tool for Copper Aluminum and Thin Stainless Steel Tube

  • 【What You Will Get】: This air conditioning copper pipe flaring tool set contains 8 tools: 6 Pcs different size drill bits, 1 Pc mini copper pipe cutter, 1 Pc deburring tool, complete set of tools, very suitable for air conditioning copper pipe flaring operation during HVAC installation, no complicated learning, easy to use..
  • 【Drill size】: 6 different sizes of drill bits, including 1/4'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8''.
  • Handle diameter: 7 mm (hexagonal handle), pipe reaming tool is a necessary accessory for repairing air conditioners..
  • 【Mini copper pipe cutter】: 3-28mm (1/8" - 1 1/8") copper pipe cutter can cut copper pipe, steel pipe, stainless steel pipe, aluminum pipe PVC and iron. Note: Cutting PVC pipe is not recommended because it is much more difficult to cut..
  • 【Deburring Tool】: The blade is mounted on the handle can rotate 360 degrees, this tool helps to clean the top of the pipe or tube, it has a compact size and can easily be carried anywhere..
  • 【Why Do You Need HVAC Tools Drill Bit Set】: When connecting copper pipes of air conditioners, the soft copper pipes are expanded by the rotation of the drill bit, so that the two copper pipes are connected without leakage. When used in combination with electric drill and impact....
Check Stock

LitKiwi PVC Pipe Inside Cutter(4Pcs Saw Blades) with 1/4\ Hex Shank,Plumbing Inside Cutter Internal Plastic ABS Pipe Cutter,1-1/4\ & 1-3/4\ Or Larger Diameter

  • ★【NICE QUALITY】The shank is made of heavy duty carbon steel with high hardness, durability and smooth surface. The blade is made of strong HHS, which is durable and sharp, helping to improve work efficiency and provide perfect cutting results..
  • ★【EASY & EFFICIENT】The cutter is suitable for most electric drills and is very easy to install and replace. Small in size and easy to carry, it is not only suitable for cutting from the outside, but also suitable for work scenarios where pipes need to be cut from the inside..
  • ★【NICE WORK】The plumbing tool cutters are available to attach to the power drill and move to cut the pipes,It is very suitable for PVC pipes and plastic pipes, and can also be used for pipes made of soft metal, but when cutting soft metal pipes, please use coolant or water when cutting to prevent the saw blade from overheating..
  • ★【ATTENTION】For your safety, please must wear gloves and goggles and be care around spark when using rotary tool accessories.And the maximum speed of the saw blade cannot exceed 20,000 rpm.Keep out of the reach of children to prevent injury..
Check Stock

CG2-11Y Manual Tunnel Pipe Gas Cutting Machine 5~50mm Torch Beveling Gas Cutter Precise Pipe Cutting Machine Efficient Pipe Beveling Machine Tube Pipe Cutter Tool(Acetylene + Oxygen)

  • ★【NICE QUALITY】The shank is made of heavy duty carbon steel with high hardness, durability and smooth surface. The blade is made of strong HHS, which is durable and sharp, helping to improve work efficiency and provide perfect cutting results..
  • ★【EASY & EFFICIENT】The cutter is suitable for most electric drills and is very easy to install and replace. Small in size and easy to carry, it is not only suitable for cutting from the outside, but also suitable for work scenarios where pipes need to be cut from the inside..
  • ★【NICE WORK】The plumbing tool cutters are available to attach to the power drill and move to cut the pipes,It is very suitable for PVC pipes and plastic pipes, and can also be used for pipes made of soft metal, but when cutting soft metal pipes, please use coolant or water when cutting to prevent the saw blade from overheating..
  • ★【ATTENTION】For your safety, please must wear gloves and goggles and be care around spark when using rotary tool accessories.And the maximum speed of the saw blade cannot exceed 20,000 rpm.Keep out of the reach of children to prevent injury..
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • 152mm 6" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • 102mm 4" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

HVAC Tools Drill Bit Set Air Conditioner Copper Pipe Expander Swaging Tool Copper Tube Flaring Tool Spin Bit Set 6 Pcs Bit Kit Includes 1/4 3/8 1/2 5/8 3/4 7/8 Bits

  • 【6 Pipe Sizes】6 different sizes of drill bits, including 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1/4" triangular handle. Our pipe expansion tool are....
  • 【Working Principle】 When connecting the copper pipes of the air conditioner, the soft copper pipes are expanded by the rotation of the drill bit,....
  • 【High Quality Material】The drill bit is made of ball bearing steel, with high strength, not easy to break, wear-resistant and durable. The....
  • 【Easy to Use】It is very suitable for HVAC installers to perform air conditioning copper pipe expansion operations without complicated learning.....
  • 【Easy to Carry& Store】 Compared with other copper pipe flaring tools, our drill bit set can be carried with you or placed in the tool box, it does....
Check Stock

Windspeed 1+5Pcs Inside Pvc Pipe Cutter, Internal Pvc Pipe Cutter for Plumbing Inside Cutter with1/4\ Hex Shank, 5 Inside Pvc Pipe Cutter Replacement Blades (32/32/ 35/44/ 48 mm)

  • ...eep, dense, and sharp tooth marks, which can help you easily cut PVC pipes, plastic pipes, density boards, and aluminum pipes. At the same time, the cutting planes are smooth and flat after cutting..
  • ❤【easy to use】: After selecting the inside cutter for pvc with the proper size and connecting the electric drill, you can cut the pipe from the inside or the outside. The grinding wheel can also help you grind the plane after cutting. (Cooling liquid or water shall be used for cooling during cutting to prevent the saw blade from overheating).
  • ❤【Well Made】: The handle of the internal plastic pipe cutter is made of heavy carbon steel, with high hardness, and strong wear resistance, and is well made. The inside pipe cutter blade is made of HHS material, which is sturdy and durable, with sharp tooth marks and excellent cutting ability. (To better preserve the saw blade, a layer of protective oil is added to its surface).
  • ❤【Warm Tips】: To protect your safety, when using the inside pvc pipe cutter for cutting work, the maximum speed of the saw blade should not exceed 20,000 RPM, and you should wear protective tools, such as goggles and gloves..
Check Stock

BINOTA Concrete Hole Saw SDS Plus Max Shank for Cement Brick Wall, Kit 40 65 80 100 125 MM

  • The hole saw alloy teeth are made of high-strength tungsten-cobalt alloy and have a sharper shape design. Hole saws have better hole opening efficiency..
  • The surface of the carbid hole saw is smooth: the waste is easier to remove when opening, and the operation is more stable and the opening effect is better..
  • It can be used to open self leveling concrete, hollow brick, cement wall, concrete wall, red brick etc. when installing air conditioners, water pipes, water heaters, fume pipes, sewers, etc..
  • The concrete drill bit adopts a cross type, which is more stable and not easy to slip when drilling, and the high quality masonry drill bit is applicable to masonry wall, brick walls, cement boards and so on..
  • The core drill arbor of the hole saw is designed with SDS PLUS 110mm and SDS MAX 160mm, which are perfectly matched with the round shank four-hole and five-hole electric impact drills respectively. The length can meet the drilling requirements of most wall thicknesses..
Check Stock

BINOTA Concrete Hole Saw SDS Plus Max Shank for Cement Brick Wall, Kit 30 40 65 80 100 MM

  • The hole saw alloy teeth are made of high-strength tungsten-cobalt alloy and have a sharper shape design. Hole saws have better hole opening efficiency..
  • The surface of the carbid hole saw is smooth: the waste is easier to remove when opening, and the operation is more stable and the opening effect is better..
  • It can be used to open self leveling concrete, hollow brick, cement wall, concrete wall, red brick etc. when installing air conditioners, water pipes, water heaters, fume pipes, sewers, etc..
  • The concrete drill bit adopts a cross type, which is more stable and not easy to slip when drilling, and the high quality masonry drill bit is applicable to masonry wall, brick walls, cement boards and so on..
  • The core drill arbor of the hole saw is designed with SDS PLUS 300mm and SDS MAX 300mm, which are perfectly matched with the round shank four-hole and five-hole electric impact drills respectively. The length can meet the drilling requirements of most wall thicknesses..
Check Stock

SharCreatives 55-Piece Master Screw Extractor Drill Bit & Guide set, Broken bolt extractor set, Multi-spline Extractors & Drill Bits for Removing Stripped, Frozen, Rusted, Roundoff Bolts, Screws, Pins

  • ... Titanium Nitride coating provides higher wear resistance, ability to withstand higher temperature. This bolt extractor set makes it the ideal set for removing broken screws, bolts, studs, fittings, threaded pipes pins and more..
  • The Master set contains 16 high-speed steel drill bits, 13 multi spline extractors, 10 drill bit guide bits, 6 spiral screw extractors , 5 extractor pins, 5 nut extractors. Multiple specifications and sizes to meet your various work needs..
  • Wide range of applications: All the screw extractors are precision engineered to easily remove seized, broken studs, bolts, pipes, lugs, socket screws and fittings.
  • The aggressive left handed drill bits and extractors create extra gripping power. Easy-out style spiral flutes embed themselves to increase grip as resistance increases. Drill bit kit guide and long extractor pins for hard-to-reach and tight areas. Fit where others won't and can't..
  • 55 Pieces includes: 16 high-speed steel drill bits Size:（5/64"，7/64"，1/8"，5/32"，3/16"，7/32"，1/4"，19/64"，9/32"....
Check Stock

Hordion 50mm Concrete Hole Saw SDS Plus Shank Hole Saw Cutter with 202mm Connecting Rod Drill for Cement Brick Wall

  • Package Includes: 1 x 2" hole saw cutter, 1 x 7.95" connecting rod, 1 x 0.28" drill bit, 1 x screw.
  • Industrial Grade Material: Made of high-quality YG8C alloy, which is very durable and impact resistant. At the same time, using high-frequency welding technology, the welding joint is very firm, the inner and outer welding joints are smooth, the joint is accurate, and the cutting is more perfect and precise.
  • SDS Plus Shank Design: The connecting rod handle adopts SDS PLUS design, and the male thread adapter is convenient to be used with the round shank four-pit electric impact drill.
  • Widely Used: Easy to use, quick to drill, very suitable for installation of air conditioners, water heaters, water pipes, smoke exhaust pipes, sewer pipeline hole open, etc.. Mainly engaged in the opening of red bricks, cement and other wall brick structures.
  • 100% Guarantee: If you are not satisfied with the product, you can get a full refund within 90 days, just contact us. We guarantee you a 100% satisfied shopping experience at Hordion Amazon Store..
Check Stock