Reviews Oil Cooler Hose

6AN 5Feet Stainless Steel Nylon Braided Fuel Line Hose Oil Gas Hose Oil Line Hose Silver

  • 【Material】Outside Hose Material: Coverd with High Quality Nylon and Stainless Steel Wires.
  • Inner Hose Material: CPE Synthetic Material Hose..
  • 【CPE Braided Hose】Mostly can be work with coolant, diesel, oil, hydraulic fluid, pump gas, air and fuel. Please notice that the service life might be shorter when it work with fuel..
  • 【Application】This braided hose can be used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect..
  • 【Performance】Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • 【Note】Not recommended installation in corrosive environment, braided fuel line's service life will be influenced..
Check Stock

EVIL ENERGY 6AN Fuel Line Kit, -6 Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black(0.34inch ID)

  • 6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line..
  • Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.34". Hose OD: 0.543inch..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

MOTOCOCHE 40,000 GVW Low Pressure Drop Transmission Oil Cooler Kit with Mounting Hardware, Towing Hitch Engine Oil Coolers & Kits Advanced Cooling Protection Replaces LPD47391 47391 OC-4739-1

  • Main Function -- As an auxiliary component, the transmission oil cooler can keep the temperature of the hydraulic oil in the gearbox low and extend the service life of the transmission and engine..
  • Wide Application - Suitable for car, vans, light trucks, R.V. and towing applications, applications up to 40,000lbs gross vehicle weight. It will work on any vehicle as long as you have room to have air flow through the transmission oil cooler. Replace OEM part number LPD47391 47391 OC-4739-1..
  • Brazed Aluminum Structure -- Adopt durable brazed aluminum structure to provide advanced cooling protection, strong heat transfer and higher cooling performance..
  • What You Will Get -- Low pressure drop transmission oil cooler kit includes transmission Oil Cooler, cooler hose, hose clamps, bolts, nuts, washers, steel mounting straps and brass fittingsd, etc..
  • Quality Service -- We wholeheartedly provide you with the best service, 1 years warranty and 7*24 hours online answering your questions about the product, you are welcome to contact us at any time..
Check Stock

Derale 13950 Atomic-Cool Remote Cooler , Black

  • Universal:universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
  • Installation location:choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
  • Function:keep oil temperature low, help to improve the lubricating effect of engine oil, prevent parts damage ,or even seizure of the engine.Usable to cool down engine oil,transmission, and rear-differentials.Besides,this stacked-plate oil cooler design smaller and lightweight suitable for narrow space..
  • Size:10AN 30Row oil cooler,oil capacity:0.74L.Test pressure: 116psi,burst pressure:232psi.Material:aluminium alloy..
  • Package Include:1pc 30row engine oil cooler.2pcs 10an female to 8an male fittings,2pcs 10an female to 6an male fittings.Can be used to connect 8AN / 6AN braided fuel line hose ends..
Check Stock

20FT 6AN 3/8\ Nylon Stainless Steel Braided CPE Oil Gas CPE Fuel Line Hose,black

  • ▶Nylon and stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, swap fuel line..
  • ▶Black Braided Steel Fuel Hose Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Working Temperature Range: -40℉ to 150℉. Please make sure the pressure and temperature range is suitable for your application before purchase..
  • ▶Length: 20 Feet. Inner Diameter: 5/16" (8.71mm). Outside Diameter: 0.56inch (14.22mm). Please measure before purchase!.
  • ▶Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • ▶Professional installation is highly recommended. The AN6 nylon braided fuel hose is designed for use with 6AN swivel style hose end fitting. All of our products are subject to strict quality control. If there are quality problems or you are not satisfied with the products, please contact us. We offer you the best solution..
Check Stock

3Ft 6AN 3/8" Fuel Line Hose Braided Stainless Steel W/2pcs AN6 Hose Fitting Kit Blue & Red Universal for Racing Fuel, Gas, Coolant etc

  • Stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas ,vacuum, hydraulic fluid, lube, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line..
  • Braided Steel Fuel Line Maximum Working Pressure (psi): 1000 psi. Bursting Pressure(psi): 6000psi. Working Temperature Range: -40℉ to 257℉(-40℃ to 125℃). Please make sure the pressure and temperature range is suitable for your application before purchase..
  • Include a universal 3Ft fuel hose and 2pcs swivel hose ends.
  • Inner Diameter: AN-6 (3/8") - Outer Diameter: AN-9 (9/16").
  • Double stainless steel braid cover for excellent flexibility and resistance to abrasion. This hose is perfect for extreme environments where there is extra heat or where chaffing might occur..
  • Professional installation is highly recommended. Warranty: CarBole offers 3-month warranty for the steel braided hose..
Check Stock

6.0L Powerstroke Oil Cooler Flush Kit,Blue Anodize Adapter Flush Adapter for Ford 2003 2004 2005 2006 2007 2008 2009 2010 Diesel

  • Made of by high quality aluminum and Brass,prevent high oil temperature result in costly fuel systems and engine failure.Instead of spending a high price to replace the 6.0-liter oil cooler, it is more appropriate to spend a little free time to clean it. And our products can be used repeatedly..
  • With our 6.0L Power Stroke Oil Cooler Flush Kit, the oil cooler can be backflushed in less than an hour. By directing the water flow in the opposite direction of normal travel, contaminants are removed and, in most cases, the cooler is restored to new effectiveness..
  • No need to remove the plant cooling manifold. Coolant enters the cooler from the oil cooler, and when disturbed, the quick connection hose between the oil cooler and the cooler will usually start to leak, resulting in rewinding. Our device will not interfere with the original connection..
  • It is advisable to regularly monitor the Delta T (difference between oil temperature and coolant temperature) while operating the engine under load. If the temperature difference exceeds specification we recommend performing an oil cooler flush. Careful attention to this detail can prevent thousands of dollars of engine and fuel system damage. In the case of a cooling system that has experienced extreme neglec....
Check Stock

Transmission Cooler LPD47391 Trans Cooler 40,000 GVW Transmission Cooler Kit with Mounting Hardware Transmission Oil Cooler With Cooler Hose

  • 1.[ Transmission Cooler That Provides The Best Protection for Cars ]: When your vehicle needs an auxiliary transmission oil cooler, it can provide you with the best protection. The trans cooler can be used to cool the engine crankcase, clutch, valve assembly, etc. It is an essential tool for heavy-duty applications..
  • 2.[ Highly Compatible Trans Cooler ]: The transmission cooler kit is suitable for advanced cooling protection and traction applications of cars, vans, light trucks, R.V. below 40,000GVW..
  • 3.[ Part Number For Transmission Oil Cooler ]: LPD47391.
  • 4.[ Transmission Performance Oil Cooler Made of High-quality Materials ]: This transmission cooler is made of high-quality materials. The brazed aluminum structure is characterized by its high temperature resistance, corrosion resistance and long service life. The improved fin spacing is more precise, which can achieve efficient airflow and cooling..
  • 5.[ Transmission Cooler Kit With Complete Accessories ]: This kit includes transmission cooler, bolts, nuts, washers and steel mounting straps, brass fittings, high-quality cooler hoses and hose clamps..
Check Stock

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

  • ...line. All the an fittings feature a reusable spin-lock connector.
  • Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
  • Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
  • Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
  • No Worry To Buy: Excellently Sealed, no leaking. We offer 3-month after-sale service for the 6an 3/8 fuel hose fittings kit. Any problem you have, contact us directly by amazon message. Please Noted: Professional installation and....
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in half..
Check Stock

PQY 10 Row AN10-10AN Stacked Plate Oil Cooler 6AN 8AN Adapter Universal Engine Transmission Aluminium Alloy

  • For Universal Fitment. May require some modifications to fit certain vehicles.For modified street vehicles which are driven hardly with racing track use..
  • 10 row oil cooler reduces coolant temperature and extend engine life..
  • Cool down engine oil, transmission and rear-differentials like a radiator.Keep the oil temperature low to prevent damage, or even seizure of the engine.Improve lubrication and power performance. Maintain oil viscosity. Save fuel..
  • Can used to connect the 8AN / 6AN braided fuel line hose end. Inlet / Outlet Size: AN-10 Oil Capacity: 0.24L.
  • Package include:1x 10Row Stacked Plate 10AN Oil Cooler,2x 10AN Female to 8AN Male Fitting Adapter,2x 10AN Female to 6AN Male Fitting Adapter.
Check Stock

A-Premium Automatic Transmission Oil Cooler Line Hose Assembly Compatible with Chevrolet Cruze 2011 2012 2013 2014 L4 1.4L

  • 【Vehicle Fitment】Compatible with Chevrolet Cruze 2014-2014 L4 1.4L(with External TOC), Cruze 2011-2013 L4 1.4L.
  • 【Reference Number】The A-Premium automatic transmission oil cooler's reference number: 624-589, 5801652, 39066278, 13324824. Before placing an order, verify that the part is compatible with your vehicle using the compatibility system..
  • 【Durable construction】This oil cooler line is made of durable, corrosion-resistant material for reliable, leak-free performance.
  • 【Specification】Material: Rubber/Metal.
  • 【Customer Support】1 Year Unlimited-mileage Quality Guarantee.
  • with being sturdy and brand-new, this oil cooler hose assembly is the ideal replacement. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile..
Check Stock

PQY 16 Row AN10-10AN Stacked Plate Oil Cooler 6AN 8AN Adapter Universal Engine Transmission Aluminium Alloy

  • For Universal Fitment. May require some modifications to fit certain vehicles.For modified street vehicles which are driven hardly with racing track use..
  • 16 row oil cooler reduces coolant temperature and extend engine life..
  • Cool down engine oil, transmission and rear-differentials like a radiator.Keep the oil temperature low to prevent damage, or even seizure of the engine.Improve lubrication and power performance. Maintain oil viscosity. Save fuel..
  • Can used to connect the 8AN / 6AN braided fuel line hose end. Inlet / Outlet Size: AN-10.
  • Package include:1x 16Row Stacked Plate 10AN Oil Cooler,2x 10AN Female to 8AN Male Fitting Adapter,2x 10AN Female to 6AN Male Fitting Adapter.
Check Stock