Reviews Od Turning

Raindrip Adjustable Flow Bubbler Full-Circle Pattern 8 Stream with 1/4 in Barbed Inlet Single 50-Pack 157050B

  • Releases water in a stream spray, full-circle pattern.
  • amount of water flow is adjusted by turning the dial on the bubbler.
  • Ideal for watering groundcover, decorative grasses, flower and vegetable gardens, as well as trees and shrubs.
  • ¼ in. barbed inlet fits into punched hole in supply tubing with outside diameter (OD) 0.250 in..
  • Spray reaches up to 16 in. radius at 40 PSI.
  • Discharge water from 0 to 11.7 GPH at 20 - 40 PSI.
  • As part of a complete drip irrigation system, the emitter delivers water gradually.
  • with this non-pressure compensating emitter, expect varying water flow based on length of tubing or elevation, with higher flow closer to the water source.
  • Increase or decrease water flow by turning the dial.
  • 8-stream bubbler releases water in a full-circle pattern.
  • Discharge rates from 0 to 11.7 GPH, radius from 0 to 16 in. (at 0-40 PSI).
Check Stock

DERNORD Sanitary Butterfly Valve with Pull Handle Stainless Steel 304 Tri Clamp Clover ( 4' Tube OD )

  • Tube OD: 4 Inch, Ferrule Size: 102MM, Fits 4 Inch Tri-clamp.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA.
  • 100 Percent pressure hydraulic tested for reliability.
  • The pull style handle allows you to set the valve in three different positions simply by pulling and turning.
Check Stock

DERNORD Sanitary Butterfly Valve with Pull Handle Stainless Steel 304 Tri Clamp Clover (1.5\ Tube OD)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA.
  • 100 Percent pressure hydraulic tested for reliability.
  • The pull style handle allows you to set the valve in three different positions simply by pulling and turning.
Check Stock

Micro 100 AL-8 Forming Tool - AL Style - Brazed 1/64 Corner Rad.175 Width 1/4 Length 1/2 Square Shank 3-1/2 OAL Uncoated

  • Designed for left hand turning and facing on the outside diameter (OD) in lathe applications.
  • Ground with side rake to provide a positive cutting action and better chip evacuation.
  • Solid carbide tipped with zinc coated hardened steel shank.
  • Available in industry standard fractional shank sizes.
Check Stock

Micro 100 AL-6 Forming Tool - AL Style - Brazed, 1/64\ Corner Rad.365\ Width, 3/4\ Length, 3/8\ Square Shank, 2-1/2\ OAL, Uncoated

  • Designed for left hand turning and facing on the outside diameter (OD) in lathe applications.
  • Ground with side rake to provide a positive cutting action and better chip evacuation.
  • Solid carbide tipped with zinc coated hardened steel shank.
  • Available in industry standard fractional shank sizes.
Check Stock

DERNORD Butterfly Valve with Trigger Handle Stainless Steel 304 Tri Clamp Clover (1.5 Inch Tri Clamp Butterfly Valve)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • The Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

DERNORD Butterfly Valve with Blue Trigger Handle Stainless Steel 304 Tri Clamp Clover (1.5 inch Tri Clamp Butterfly Valve)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • DERNORD Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

DERNORD 2 Pack 1.5 Inch Tri Clamp Sanitary Butterfly Valve with Pull Handle Stainless Steel 304 Tri Clamp Clover 1.5 Tri Clamp Butterfly Valve

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA.
  • 100 Percent pressure hydraulic tested for reliability.
  • The pull style handle allows you to set the valve in three different positions simply by pulling and turning.
Check Stock

DERNORD 1.5 Inch Tri Clamp Clover Butterfly Valve with Trigger Handle Sanitary Fitting Stainless Steel 304 2 Pack 1.5 Inch Trigger Butterfly Valve

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • The Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

Danco 34443 Rubber Faucet O-Ring Kit, Black

  • ELIMINATES AND PREVENTS LEAKS: Faucet O-rings help eliminate faucet leaks by providing a better seal and a positive shut off.
  • ABRASION AND HEAT RESISTANT: O-rings have a high abrasive resistance and temperature resistance and will withstand heat between a temperature range of 86°F to 248°F (-30°C to 120°C).
  • ASSORTED O-RINGS OUTER DIAMETER: Includes 12 most popular sizes and Lid chart illustrates the sizes for easy identification: 3/8” OD.
  • 7/16” OD, 1/2” OD, 9/16” OD, 5/8” OD , 11/16” OD, 3/4” OD, 3/16” OD, 7/8” OD, 15/16” OD, 1-1/16” OD and 1-1/8” OD.
  • BEVELED DESIGN: allows for full water flow.
  • PROFESSIONAL & DIY HOME KIT: Pack of 200-Faucet O-ring Assortment helps not only the Plumbing Professional, but the everyday DIY'er.
  • DURABLE: O-rings are constructed of tough and pliable Buna-Nitrile Rubber (NBR) that will help provide long-term use for your plumbing needs.
Check Stock

Brass Compression Tube Fitting, Union Assortment Kits, 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ OD (5pcs)

  • Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required..
  • Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Eastman Quarter-Turn Brass Angle Stop Valve, 1/2 inch FIP x 3/8 inch OD Comp, Chrome, 10733LF

  • ✅DESIGN- Forged brass construction which provides strength and durability eliminating leaks. The chrome-plated finish gives it a modern look..
  • ✅QUALITY- The Teflon seats of the valve resist corrosion and provide a watertight seal. Chrome-plated finish resists corrosion..
  • ✅EASY TO USE- Brass ball mechanism provides ease of operation. It has a removable oval handle which provides easy grip..
  • ✅FUNCTIONALITY-With 1/4 turn, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home..
  • ✅MEASUREMENT- Professional Series Quarter-Turn Angle Stop Valve has a 1/2-inch Iron Pipe Inlet (FIP) x 3/8-inch OD Compression Outlet..
Check Stock

BrassCraft SC2163 Beveled Washer Assortment

  • Assortment of Beveled Faucet Washers and Bibb Screws in the Most Popular Sizes.
  • Includes (2) 3/8" x 8-32 Thread Bibb Screws, (2) 3/8" x 10-32 Thread Bibb Screws, (2) 3/8" x 10-24 Thread Bibb Screws, (2) 1/2" OD Faucet Washers ,.
  • (2) 19/32" OD Faucet Washers, (2) 5/8" OD Faucet Washers, (4) 17/32" OD Faucet Washers and (2) 9/16" OD Faucet Washers.
Check Stock