Reviews Obx Racing Sports Performance Exhaust

Remflex 8053 OBX Exhaust Header Connector Gasket Set of 2 Model 8053 Car & Vehicle Accessories / Parts

  • 1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
  • Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not.
  • Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent.
Check Stock

BBR Tuning Racing Series DIO Cylinder Body & High Performance 21mm OKO Carburetor Assembly

  • RACE READY PERFORMANCE: With the BBR Tuning Racing Series DIO Cylinder Body & Reed Assembly with OKO 21mm Carburetor w/ Velocity Stack you’ll get the power and speed your build’s been looking for. A ported cylinder body with a high performance reed valve intake system, this race assembly was made for race engines in mind..
  • PORTED CYLINDER: Unlike other cylinders, the BBR Tuning Racing Series DIO Cylinder Body is ported to allow maximum fuel and air mixing within your motor. The exhaust port can fit nearly any performance muffler as well as any stock exhaust muffler you want to run, which the intake port is specifically designed to accept the reed valve assembly included with this kit.
  • BOOSTS POWER: With a 32mm opening, you’ll be able to fit hardcore racing carburetors like the BBR Tuning High Performance 2-Stroke OKO Style Carburetor without a single problem. With the right carburetor, this reed will deliver tons of fuel and air to your motor and give you higher speeds and even more torque..
  • COMPLETE KIT: The BBR Tuning Racing Series DIO Cylinder Body & Reed Assembly is paired with a 21mm OKO Race carburetor is racer’s dream setup- get ready for a bike that’ll scream whenever you hit the gas!.
  • INCLUDES: Modified BBR Tuning Racing Series DIO Cyl....
Check Stock

Remflex (8053) OBX Exhaust Header Connector Gasket, (Set of 2)

  • 1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
  • Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten the flange bolts.
  • Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 Inch.
Check Stock

Drag Racing Mens Helmet Nos Racecar Nitro Hot Rod Car Tuning T-Shirt

  • Searching for Nitro Drag Car Automotive Nos Exhaust design? Make a statement with this Automotive Drag Racing Nos Helmet graphic design. Great idea for the Nos Exhaust Car Racing fan in your life who loves funny and cool car racing American Flag tees..
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

Maxima (22964) Formula K2 2-Stroke Synthetic Premix Racing Oil - 64 oz.

  • A very high performance 100% synthetic 2-cycle lubricant utilizing 2000 centistoke esters along with special additives to achieve outstanding levels of protection and cleanliness.
  • Friction and wear, ring sticking and exhaust tract (power valve) carbon are virtually eliminated.
  • Provides higher levels of rust and corrosion protection.
  • Ideally suited as a premix with pump or race gasoline in virtually all high performance and racing 2-cycle engines.
Check Stock

Truck Exhaust Kits - Shop Line dual exhaust system 2.5 AL pipe 2 chamber Muffler 2.5" Black Slash Cut Weld on Tip

  • Vehicle Compatibility - This cat-back exhaust is compatible with Honda Civic Coupe Sedan 1992-1995, Honda Civic EX 1996-2000, does NOT fit hatchback models..
  • Brilliant Performance - Come with [1] high performance racing design exit cat-back exhaust kit, can increase 15 to 25 horsepower instantly or low end torque and maximize to enhance the exhaust gas flow without sacrificing the aggressive tone sound in the smooth conditions..
  • Extraordinary Quality - It is constructed of high quality aluminized steel with computerized mandrel-bends for the strength and durability, and the TIG welded CNC machine can resistant against pressure and corrosion..
  • Simple Installation - Easy for the installation, make you enjoy the best performance in the fastest time..
  • Product Specification - Major Piping: 2.5" OD | Muffler Exhaust Tip (Removable Silencer Included): 4.5" OD | Inlet: 2.25" OD | Muffler Tip Type: Round.
Check Stock

Maxima 22916 Formula K2 2-Stroke Synthetic Racing Premix Oil - 16 oz. Bottle

  • Formula K2 is a very high performance 100 percent synthetic 2-cycle lubricant utilizing 2000 centistoke esters along with special additives to achieve outstanding levels of protection and cleanliness.
  • Friction and wear, ring sticking and exhaust tract (power valve) carbon are virtually eliminated.
  • Also provides higher levels of rust and corrosion protection.
  • Formula K2 is ideally suited as a premix with pump or race gasoline in virtually all high performance and racing 2-cycle engines.
Check Stock

4 inches Round Muffler Rolled Tip Catback Exhaust System Compatible with Silverado Sierra 1500 4.3L 5.3L Extended Crew Cab 14-19, Stainless Steel

  • ▶️ This cat-back exhaust is compatible with Chevrolet Silverado 1500 2014-2018, Chevrolet Silverado 1500 LD 2019, GMC Sierra 1500 2014-2018, GMC Sierra 1500 Limited 2019, fits with 4.3L 5.3L extended and crew cab models, does NOT fit 2WD crew cab models with 2pc drive shaft..
  • ▶️ Come with [1] high performance racing design dual exit cat-back exhaust, it can maximize to enhance the high exhaust air flow rate without sacrificing the attractive power sound in the smoothest conditions..
  • ▶️ Made of high quality stainless steel with computerized mandrel-bends for strength and durability, and the TIG welded CNC machine can resistant against pressure and corrosion. All those material can guarantee the reliable performance in any circumstance..
  • ▶️ Easily for the installation, can make you enjoy the best performance in the fastest time..
  • ▶️ Major Piping: 3" OD | Muffler Exhaust Tip: 4" OD | Inlet: 3" OD | Outlet: 2.5" OD | Round Diagonal Cut Rolled Tips.
Check Stock

Red Line 40605 Two-Stroke Oil Racing Synthetic - Gallon

  • Ultimate in two-cycle performance, extreme cleanliness.
  • Popular in racing and daily applications like motorcycles, marine, snowmobile racing, etc..
  • Dyno proven for gains of 3-5% and more power over longer runs.
  • High-temp stability prevents deposits on combustion chambers, exhaust ports, upper ring and piston crown.
  • Suggested use at 50:1, but useful up to 100:1 depending on operating conditions.
Check Stock

Maxima 22916 K2 Racing Pre-Mix 2-cycle Oil - 16oz Bottle (1)

  • 100% synthetic ester high-performance 2-cycle racing pre-mix oil Reduces power valve maintenance.
  • Prevents rust and corrosion. Eliminates ring sticking.
  • Extremely clean burning and keeps exhaust tracts carbon free.
  • Pre-mix use only in any 2-cycle racing engine.
Check Stock

Mutazu Performance Axle-Back Exhaust Muffler For Mazda Miata NB 1999-2005 T-304 (CBE-043A)

  • Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate / High Performance Racing Spec. Design.
  • Instantly Increases Horsepower/ Low End Torque / TIG Welded CNC Machine Flange for Resistance against Pressure and Corrosion.
  • Aggressive Deep Sound while Ensures Smooth Exhaust Gas Flow / Fitments: 1999-2005 Mazda Miata NB with 1.8 litter Engine.
  • Muffler Exhaust Tips: 3.5" Round / Piping Inlet Size: 2.5" OD.
Check Stock

4 inches Round Muffler Rolled Tip Catback Exhaust System Compatible with Silverado Sierra 1500 4.8L 5.3L Extra Crew Cab 07-13, Stainless Steel

  • ...xtra Cab 2007-2008, GMC Sierra 1500 5.3L Crew Cab 2007-2013, GMC Sierra 1500 4.8L Crew Cab 2007-2008, GMC Sierra 1500 5.3L Extra Cab 2007-2013, GMC Sierra 1500 4.8L Extra Cab 2007-2008, fits with 5.5' 6.5' bed models, EXCLUDE 2007 classic models..
  • ▶️ Come with [1] high performance racing design dual exit cat-back exhaust, it can maximize to enhance the high exhaust air flow rate without sacrificing the attractive power sound in the smoothest conditions..
  • ▶️ Made of high quality stainless steel with computerized mandrel-bends for strength and durability, and the TIG welded CNC machine can resistant against pressure and corrosion. All those material can guarantee the reliable performance in any circumstance..
  • ▶️ Easily for the installation, can make you enjoy the best performance in the fastest time..
  • ▶️ Major Piping: 3" OD | Muffler Exhaust Tip: 4" OD | Inlet: 3" OD | Outlet: 2.5" OD | Round Diagonal Cut Rolled Tips.
Check Stock

Mutazu Stainless Steel Aggressive Axle-Back Exhaust Muffler For Mazda Miata NB 1999-2005 Longitude mounting (MX3-023)

  • Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate / High Performance Racing Spec. Design.
  • Instantly Increases Horsepower/ Low End Torque / TIG Welded CNC Machine Flange for Resistance against Pressure and Corrosion.
  • Removable baffle / Aggressive Deep Sound while Ensures Smooth Exhaust Gas Flow / Fitments: 1999-2005 Mazda Miata NB with 1.8 litter Engine.
  • Muffler Exhaust Tips: 4" Round, Piping Inlet Size: 2.5" OD.
Check Stock