CBK 7 Pin Male OBD1 to OBD2 OBDII 16 Pin Diagnostic Adapter Cable for Ford EFI
- OBD II connector adapter specific for Ford cars (7-pin). The OBD 2 connector is 16-pin socket. This is a small adapter with 15cm cable connects a....
- Connects a 16 pin OBD2 diagnostic tool to a car with 7 pin socket..
- The cable has two connectors: one is 7 Pin connector, another is 16 Pin OBD OBDII connector..
- The cable can be used for converting connection from 7 Pin to OBD OBDII 16 Pin interface, allows you use OBD OBDII diagnostic tools working with your....
Check StockiKKEGOL Ultra Low Profile Right/Left Angle 16 Pin OBD2 OBDII Splitter Extension Cable Male to Dual Female Y Cable 30cm/12 (Right/Left Port)
- ✔30cm 12″ OBD II 1 x Male 16 pin J-1962 and 2 x Female 16 Pin J-1962 Ultra Flat low profile connectors..
- ✔Direct pass through on pins 2, 4, 5, 6, 7, 10, 14, 15, 16 ,Ideal for use with GPS trackers for the most discrete installations.compliant with standard OBD2 protocols interface and the OBD-II diagnostic tool with a 16Pin socket..
- ✔ Ideal for use with GPS trackers Auto Scanner Adapter Connector for the most discrete installations.
- ✔This OBD2 splitter Cable will allow you to split out one OBD II port into Two OBD II devices to the vehicle at the same time to save more room.
- ✔Direct pass through on pins 1, 2, 4, 5, 6, 7, 10, 14, 15, 16. Supports all standard passenger vehicle OBD 2 protocols.
Check StockOLLGEN 3M/10ft OBD II Vehicle ECU Emergency Power Supply Cable Memory Saver with Alligator Clip-On 12V Car Battery Cigarette Lighter Power Socket Extension Cable
- Cigarette Lighter with Alligator to OBD2 16 Pin Male Connector Power Cable :Powered by any jump starter with a 12V outlet into an OBD II Memory Saver.Plug it into the OBD Male connector of the vehicle, plugging the cigarette connector into the clip cords, hooking it up to a 12V battery source.Note:This device can work with any 12V DC power source, including jump starter, DC 12V Lead-acid battery, or another car’s DC 12V power outlet..
- Super Long 10ft (3meters) Cable: plenty long until you try connecting it to another car's battery or cigarette lighter. In this way, you can change your car battery, also by get the alternative 12V power source from another car, when you not have a jump starter on hand..
- 8 amp fuse built into the memory saver, better reliable on overload protection. Powered by any jump starter with a 12V outlet into an OBD II Memory Saver. Interface connector between a 12V DC power source and vehicle's OBD II port. Preserves vehicle codes and electronic presets. Replacing a car battery on older vehicles used to be simple!! You unhook the old battery and install the new one..
- Work no problem as all ODBII ports :It works on any vehicle with OBDII which is 1996 and later (You will be plugging one end into it). It is not needed or required t....
Check Stock12 Pin OBD1 to 16 Pin OBD2 Convertor Adapter Cable for GM Diagnostic Scanner 15.7 inch
- Compatible with GM cars made before 1996..
- Connectors: GM 12Pins OBD1 male connector.
- OBD2 16pins female connector. 15.7 inch Long ..
- Used for connecting OBD II scanner and vehicle with this 12 pin connector which is specifically for GM..
Check StockHAIN Compatible OBD Diagnostic Adapter with 20 pin to 16 PIN OBD2 Connector for BMW E36 E39 X5 Z3
- 1.20 pins OBD port for a BMW car. The other port for the 16 pins OBD2 diagnostic tool..
- 2.Used specifically for connecting your OBD2 scanner and your BMW..
- 4.Connectors: 20 pin connector, 16 pin OBD II female connector..
- 5.Package include:1x VIMVIP OBD BMW 20 Pin Cable..
Check StockDiagnostic Connector, 3 Pin to 16 Pin OBD 2 Auto Car Diagnostic Adapter Connector Cable for Honda
- 【3 Pin to 16 Pin OBD2 Cable 】 This 3 Pin to OBD II 16Pin connector cable, could connect to the car reader for car inspection. This is a brand new data link cable, used specifically for connecting your OBD2 scanner and your vehicle with this 16pin connector.
- 【 Perfect Compatibility 】The OBD2 adapter cable is well suitablefor Honda 3 pin male connector.
- OBDII 16 pin female connector. Perfect link your car interface and diagnostic interface and can work on most Honda vehicles with a 3 pin female interface diagnostic connector.
- 【 Long Durability】This diagnostic cable is constructed from high-strength metal, ensure maximum reliability and durability for long lasting usage.
- 【 Superior Flexibility 】Professional manufacturing, superior flexibility, stable characteristic and high reliability. Plug and Play, no driver needed. Color: Black.
- 【Plug and Play 】Plug and Play, no driver needed. Length: 30.5cm / 12inch. We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care.
Check StockActron CP9125 C PocketScan Code Reader for 1996 and Newer Vehicles - Orange
- Actron’s CP9125 C PocketScan reads engine Diagnostic Trouble Codes (DTCs) on ALL 1996 & newer import/domestic vehicles sold in the USA (OBD II & CAN) as well as 1994-1995 OBD II compliant vehicles.
- This easy-to-use tool is perfect for both novice and moderately experienced do-it-yourself mechanics who want to determine the cause of Check Engine Lights without relying on a repair shop.
- Gives the user the ability to quickly determine the cause of a Check Engine light coming on – once repairs are made, PocketScan allows the user to clear the DTCs and turn off the Check Engine Light.
- PocketScan also displays the number of DTCs, Malfunction Indicator Light status, and Emissions status.
- Attached OBD II 16-pin connector cable provides both data and power connections.
Check StockOBD2 Male to Cigarette Lighter Memory Saver Adapter Cable Car OBDII Emergency Power Supply Cable
- This cable has reverse-connection protection . It is used to charge your car electric system via this cable to preserve the vechile codes and save all information in memory when you need to change the battery .But you can not get power reversely from the car electric system via this cable ..
- OBD2 16pin to cigar lighter male ,and compatible with all obd ii memory saver.
- Thick cable 18awg gauge , and length 10ft/3m.
- Reverse connection protection and 8 amp fuse in-built. This obd2 male connector can work with both 12v and 24v obd2 female port ..
- Connect the obd2 male connetor to the car you want to replace the battery for . The cigaretter lighter connector will be connect to a battery power charger or a good car which is starting ..
Check Stockbbfly-BF32301 USB FTDI Chip OBD-II Scan Tool for Windows Auto Diagnostic Scanner OBD2
- bbfly-BF32301 USB Vehicle Coverage: Works on all OBD2 Vehicles (1996 onwards in USA) and EOBD vehicles ( Petrol cars from 2001 and diesel cars from 2003/2004 in Europe).
- For your information: For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant..
- Our bbfly-BF32301 ELM327 USB V1.5 FTDI Chip OBD2 scanner is compatible with FORD, MAZDA, BMW, VW, GM, AUDI, CHEVY, TOYOTA, , LEXUS, MERCEDES, HYUNDAI, KIA, MITSUBISHI,NISSAN, SUZUKI, JAGUAR, LAND ROVER, CHRYSLER, HONDA AND SO MUCH MORE!.
- bbfly-BF32301 ELM327 USB FTDI Chip must be connected to the vehicle for use..
Check StockiKKEGOL OBD II J1962F OBD2 16 Pin Female Connector Dash Port Open Tinned Wire Pigtail Full Cables DIY with Underdash Bracket Fixed Harness Assembled Plug in 12'/30cm
- J1962F OBD2 16 Pin Female Connector Fixed Harness Female Assembled Plug Dash Port with open Tinned wired.
- It fit for any vehicle that has obd2, Easy to wired in correctly, No instructions needed, just make sure match pin location with old connector, match pin for pin, or wire for wire.
- All 16 Pins Performance Female OBD II OBD2 Vehicle Connector Wire Pigtail is designed for under dash application, Fixed Harness Male Assembled Plug Dash Port.
- All 16 Pins Connected,full 18AWG litze wires cables with tinned copper core, work for your unique project.
Check StockCreator 20PIN OBD1 to 16PIN OBD2 Connector Adapter Cable Compatible for BMW E31 E32 E34 E36
- Works on All BMW with 20 PIN Diagnostic Connector.
- Connector: Compatible for BMW 20Pins male connector, OBDII 16pins female connector.
- It is only one piece of BMW 20PIN Connector adapter cable in the package, this cable can works with creator c110 or c310 BMW scanner for scanning old....
- 20Pin to OBD II 16Pin connector cable could connect the BMW to the car reader for car inspection.
- Note: The item is just an adapter, NOT a scanner. Package included: 1* 20Pin to 16Pin OBD2 Adapter.
Check StockAutel Universal OBD2 Scanner MaxiScan MS300 Car Check Engine Code Reader Check Emission Monitor Status 2022 Newest CAN Diagnostic Scan Tool for All OBDII Protocol Vehicles After 1996
- Easy 2 Button Design to read and clear codes.
- Retrieves generic and manufacturer specific Diagnostic Trouble Codes (DTC), includes definitions lookup software on CD and displays DTC definitions on....
- Features an easy-to-read backlit LCD screen, multilingual menu and DTC definitions and standard 16-pin OBD-II connector--no additional cables are....
- Retrieves VIN (Vehicle Identification No) on 2002 and newer vehicles that support Mode 9.
- Supports the CAN (Controller Area Network) protols and all....
- Works with most OBD-II compliant U.S., European and Asian vehicles (OBD-II is standard on all cars sold in U.S. post-1996).
Check Stock5ft OBDII OBD2 Main Cable for Launch X431 CRP129 CRP123 Creader VII and VIII,16 Pin OBD Cable Adapter Diagnostic Extender Cord
- The Cable Compatible with launch CRP123, CRP129,Creader VII+ and Creader VIII..
- OBD 2 OBD II connector:15-pin female to 16-pin male OBD2..
- This cable allows you to access the pins on your car’s OBDII connector.Use it to diagnose your car.
- 5 feet of high quality heavy duty cable.Package includes 1 cable (as picture)..
- New high quality aftermarket, cable with superior flexibility and durability for direct factory cable replaceme..
Check Stock