Reviews O ring Face Seal Fittings

10Pcs Propane Tank Gasket and 10Pcs O-Rings for All Soft Nose P.O.L. Fittings, Soft Rubber Leakage-Proof Sealing, Fit for Propane Gas Adapters, Connectors, Valves, Regulators, Accessories and More

  • [WHAT YOU GET] You will get 10 pieces of Propane Tank Gasket and 10 pieces of O-Rings for All Soft Nose P.O.L. Fittings..
  • [MONEY-SAVING PROPANE ACCESSORIES] - Propane leakage preventing washers can avoid thread sealing leakage. If the seal ring worn, aged or compressed, there would cause a dangerous gas leak. Just change to new washers, there would be no more gas leak. Save much money on buying new gears and we can have a safe cooking or grill with our old equipment..
  • [Propane tank Gaskets] The Propane tank Gaskets can prevent leakage on propane tank connectors, valves, Regulators, adapters, fittings. Outer Diameter 0.716inch(18.2mm), inner diameter 0.394inch(10mm), and Thickness 0.12inch(3.0mm). Ensure replacement O-rings are in same size with your stock gasket..
  • [SOFT NOSE O-RING] - Replacement Part for Soft Nose O-Ring on Propane P.O.L. Fittings. Suitable for propane adapters, pipe connectors, elbow sealing material, cold and hot water pressure. Approximate size OD 0.587 inch or 14.9mm, ID 0.4 Inch or 10.1 mm, Thickness 0.1 inch 2.5 mm..
  • [DURABLE AND STURDY] Made of high-quality Soft Rubber, all the seal rings are durable and sturdy for long time usage..
Check Stock

Steel Power Steering Box Adapter Fitting 18mm-1.5 IFM/-6 AN, 80-Up GM

  • This adapter fitting is commonly used to adapt power steering boxes to AN 6 connections.
  • 18 mm-1.5 O-ring seal on one end and AN6 male on the other.
  • Inverted flare fittings are used on most GM power steering boxes 1977 and older.
  • Metric thread O-ring fittings are used on later model GM power steering boxes 1978 and newer.
Check Stock

Steel Power Steering Box Adapter Fitting 14mm-1.5 IFM/-6 AN, 80-Up GM

  • This adapter fitting is commonly used to adapt power steering boxes to AN 6 connections.
  • 14 mm-1.5 O-ring seal on one end and AN6 male on the other.
  • Inverted flare fittings are used on most GM power steering boxes 1977 and older.
  • Metric thread O-ring fittings are used on later model GM power steering boxes 1978 and newer.
Check Stock

PIILOO High Pressure Oil Pump HPOP Master Service Kit with O-Ring Seals & Base Gasket Compatible with Ford Powerstroke 7.3L 1994-2003 and Navistar DT466 & T444E 1995-2004

  • APPLICATION–Perfectly compatible with Ford Powerstroke 7.3L 1994-2003 and Navistar DT466 & T444E 1995-2004. (Part Numbers ISK635, ISK617, ISK795, and TL3).
  • MATERIAL–High quality rubber material o-rings seal and high standard fittings and gaskets, durability, anti-wear, anti-tear, leakproof, corrosion resistance, and longer service life..
  • FUNCTION–A complete tool kit prevents oil leakage and help replace all seals and o-rings on the high-pressure oil pump, and reinstall the pump correctly..
  • KIT CONTAINS–2-Discharge port O-rings / 1-Rear Port Plug O-ring / 1-Non-Serviceable Port O-Ring / 1-IPR Valve O-Ring / 1-IPR Nut / 1-Fill Plug O-Ring/ 1-Non-serviceable port long threaded repair plug / 1-Replacement Check Ball / 1-5ml Thread Sealer / 2-Diesel High Pressure Oil Pump STC Fittings / 1-STC Quick Disconnect Tool / 1-High Pressure Oil Pump Mounting Gasket..
  • SATISFACTION–Goupgo offer 100% brand new and high quality High Pressure Oil Pump Service Kit to every customer. If you are not satisfied with the item, simply return it for a full refund within 30 days. Don’t hesitate to contact us if you have any questions..
Check Stock

TEE CSST 1/2 X1/2 X1/2 by PRO-FLEX MfrPartNo PFTE-BBB6

  • 1-piece Retainer Ring that won’t fall off the fitting during installation..
  • Convenient, hand-tightening followed by ¼ to ½ turn with a wrench to seal the fitting..
  • Dual-size, inside-tapped fittings - ask any installer how handy this feature can be..
  • Annealed tube that allows the tubing to bend and stay bent..
  • Same dual-seal, gasket & O-ring fittings work with both traditional yellow and Flak Jacket products..
Check Stock

Drainzit STAN1438 Oil Change Aid for Briggs & Stratton Tecumseh 3/8' Oil Port

  • Drainzit oil hoses make changing oil easier and cleaner. Drainzit is easy to install, simple to use and requires no engine modification. For use on nearly all equipment powered by small engines: pressure washers, generators, pumps/sprayers, compressors, lawn mowers and more. Fits most briggs and stratton, tecumseh engines with 3/8 in. pipe thread oil drain port, Kohler command and OHC 16 and 18 HP Fittings convert to SAE wrench sizes Efficient - custom made metric fittings seal kit to.
  • Fits most briggs and stratton, tecumseh engines with 3/8 in. pipe thread oil drain port, Kohler command and OHC 16 and 18 HP.
  • Efficient - custom made metric fittings seal kit to engine with O-ring.
  • Rubber retainer loop holds kit in place when not in use.
Check Stock

Kleviro 1200 Pcs Universal O Ring Kit with 24 Sizes, Nitrile Rubber O Rings Assortment Kit Comes with a Size Chart - Premium Quality Pressure Washer O Rings Helps Fix Engine, Plumbing & Gas leakages

  • 【WIDE APPLICATION】Nitrile Rubber O-ring kit for faucet plumbing, high pressure washer, water hose nozzles or pipe fittings, sinks, filters, hydraulics fluid, auto engines, machinery bearings, pumps, boats, oils, gas control valves, spray, air kitchen bathroom water fitting seal leak repair..
  • 【MULTIPLE SIDES】Assorted rubber washer gasket oring set in 24 different size with OD of 6mm, 6.5mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 27mm, 28mm. Have thickness of 1.5mm, 2.4mm, 3.1mm. Those size could meet most daily needs.
  • 【HIGH QUALITY RUBBER】Black o rings set are made of high quality nitrile rubber. It has high force pressure over 30kg. The working temperature range is from -55 to 150℃(-131°F to 302°F).
  • The black o ring kit also has good characteristic on oil resist, wear resist and cause no leak after applying to the fittings.
  • 【TOOLS INCLUDED】Rubber O Rings Kits comes with 4 piece pick hook set, 1-piece straight pick, 1-piece 45 degree pick.
  • 1-piece 90 degree pick, 1 pieces full hook. These 4 types tools could be used in different situation and some not easy going position to do the replacement for the o rings.
  • 【CONVENIET STORAGE】The 24 sizes different o ....
Check Stock

Steel Power Steering Box Adapter Fitting 16mm-1.5 IFM/-6 AN, 80-Up GM

  • This adapter fitting is commonly used to adapt power steering boxes to AN 6 connections.
  • 16 mm-1.5 O-ring seal on one end and AN6 male on the other.
  • Inverted flare are used on most GM power steering boxes 1977 and older.
  • Metric thread O-ring fittings are used on later model GM power steering boxes 1978 and newer.
Check Stock

Goulds J7 Convertible Jet/Deep Well Pump - 115V/230V - 3/4 Hp

  • Back Pullout design for service without disturbing piping.
  • Two compartment motor for access to wiring and replaceable components.
  • Nozzle clean out plug in Shallow well adapter, premium O-RING design fittings need only be hand tight to seal.
  • Corrosion resistant, plastic tubing and fittings are easily removed for cleaning.
Check Stock

High Pressure Oil Pump Master Service Kit with Base Gasket, HPOP Upgraded Full Compatible with 1994-2003 Ford Powerstroke 7.3L Diesel Engine 7.3L F250-F550, E250-E450, Excursion (Pack of 22 Set)

  • ★High Pressure Oil Pump Master Service Kit includes all the components you need to replace all seals and O-rings on your high-pressure oil pump and correctly reinstall the pump..
  • ★Comes with many components you won’t find in other HPOP seal kits on the market today.
  • ★Suitable for 1994-2003 Powerstroke 7.3L Diesel and 1995-2004 Navistar DT466 & T444E.
  • ★Package Include:2- Discharge port O-Rings,1- Rear Port Plug O-Ring,1- Non- Serviceable Port O-Ring,1- IPR Valve O-Ring,1- IPR Nut,1- Fill Plug O-Ring,1- Non-serviceable port long threaded repair plug,1- Set of Repair instructions,2- Diesel High Pressure Oil Pump STC Fittings,1- STC Quick Disconnect Tool,1- High Pressure Oil Pump Mounting Gasket.
  • ★100% satisfaction：If you are not satisfied with our High Pressure Oil Pump Master Service Kit ,please contact us,we will try our best to solve your problem..
Check Stock

Goulds HSJ15N Convertible Water Well Jet Pump, 1-1/2 HP, Single Phase, 115/230 V.

  • Back Pullout design for service without disturbing piping.
  • Two compartment motor for access to wiring and replaceable components.
  • Nozzle clean out plug in Shallow well adapter, premium O-RING design fittings need only be hand tight to seal.
  • Corrosion resistant, plastic tubing and fittings are easily removed for cleaning.
Check Stock

EVIL ENERGY 10 Micron Inline Fuel Filter with 6AN 8AN 10AN Adapter Universal 50MM

  • [Application] Universal fuel filter, includes an6, an8, an10 adapters for different size applications..
  • [Material] Aluminum alloy fuel filter can and stainless steel filter element..
  • [O-ring] The o-ring provides a tight seal for fittings and end caps..
  • [Function] Can be used for filtering gasoline, diesel, E85, etc. Captures contaminant particles of 10 micron and above to protect the fuel system of the vehicle..
  • [Feature] Removable design, easy to clean or replace filter element at regular time..
Check Stock

Pacer Pumps 58-0714 12 S Series EPDM Water Pump Shaft Seal Kit With Seal and O-Ring

  • The Pacer Pumps water pump shaft seal kit 58-0714 12 includes the primary shaft seal and secondary O-ring..
  • This shaft seal kit is suited for all polyester Pacer S Series and Pacer Pumps with EPDM..
  • The 58-0714 12 Pacer shaft seal kit’s mechanical seal face is made from a durable carbon-ceramic, while the O-ring is made from wear-resistant EPDM..
  • As with all Pacer pump parts, the contents of the 58-0714 12 shaft seal kit are built for superior resistance to chemicals and corrosion for use in a range of commercial and residential applications..
  • The pump shaft seal kit is designed for easy installation onto the water pump for reduced downtime and increased efficiency..
Check Stock