NZXT RGB Fan & Controller AC-2RGBC-B1
- LIGHTING CHANNELS: Two NZXT RGB lighting channels, up to 40 individually addressable LEDs per channel, 80 LEDs total. Lighting channels now support up....
- FAN CHANNELS: Three fan channels with max 10W per channel output with built-in noise detection module.
- MORE RGB LIGHTING ACCESSORIES: Mix and match any NZXT RGB LED accessories within each channel, including NZXT Underglow, Cable Comb, LED strips in....
- POWERED BY NZXT CAM: NZXT CAM application monitors and controls your build, enabling you to choose from presets or custom controls for your RGB....
Check StockNZXT RGB & Fan Controller - AC-2RGBC-B1 - Two RGB Lighting Channels - Three Digital Fan Channels - Powered by CAM V4 Software - Magent/Velcro Mounting - Internal PC Lighting Controller - Black
- LIGHTING CHANNELS: 2 NZXT RGB lighting channels, up to 40 individually addressable LEDs per channel, 80 LEDs total. Lighting channels now support up....
- FAN CHANNELS: 3 fan channels with max 10W per channel output with built-in noise detection module.
- MORE RGB LIGHTING ACCESSORIES: Mix and match any NZXT RGB LED accessories within each channel, including NZXT Underglow, Cable Comb, LED strips in....
- POWERED BY NZXT CAM: NZXT CAM application monitors and controls your build, enabling you to choose from presets or custom controls for your RGB....
Check Stock
LINKUP - Ultra PCIe 4.0 X16 Riser Cable [RTX3090 RX6900XT x570 Z690 Tested] Shielded Gaming PCI Express Gen4 Reverse PCIE Connector w/ 270 Degree Socket {24cm} Compatible with NZXT H1 Without Screw
- .... No BSOD, or WUE / WHEA Error free. ***Compatible with GPU - RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, RX6500XT / Chipset - x570, B550, Z590, Z690, and future new GPUs & Chipsets. (Compatible with NZXT H1).
- Screws are not recommended for the riser cable. Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please install the riser cable onto the GPU first before securing the GPU with I/O bracket mount.
- Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals at range. Re-engineered wires and connectors for PCIe 4.0 85ohm applications for GPUs, M.2 NVMe SSD. Quality hand soldered gold-plated contacts for signal integrity.
- Unique individual laneway shielding prevents external EMI/RFI and interference between channels. Sectional design allows air ventilation and lowers working temperatures for better overall system performance. Backed by LINKUP Limited 1-Year Warranty and complimentary Premium Online Support. *** Compatible with most GPU/motherboard components and fits most cases..
Check Stock
PCIe Riser Card 1X to 16X GPU Riser for Mining Rigs, 6Pin Risers with 8 PCS Solid Capacitors, USB3.0 Cable, Upgrade Version Ver010x Riser for Ethereum Bitcoin Miner Rigs (6 PCS)
- 【Latest version: ver010x riser card for mining rigs, it features gold-plated contacts and has good performance, Anti-burn machine chip to make graphics work more safe】.
- 【Reduce Motherboard Burden: 4pin interface and two 6pin interface (two 6PIN interface directing differently) are optional to power, which provides Graphic card independent power and reduces motherboard burden when using more Graphic cards.】.
- 【The PCI-E riser card features a stable resistance, ver010x riser card for bitcoin, Litecoin and mining rig. It is has 5 LED light to display the working states】.
- 【8 PCS high quality solid capacitors will improve power stability to GPU, keeping gpu riser mining rig devices away from overheating and over voltage.】.
- 【Works with Most Systems】 Our VER 010X riser with a fixed buckle that make sure the graphics card will not fall off from the slot. It is compatible with 1x, 4x, 8x, 16x PCI-E slots, suitable for all Window, LINUX and MAC systems..
Check StockSolutions To Boiler and Cooling Water Problems (Plant Engineering)
- NEW FEATURES: Front I/O USB Type-C Port, Tempered glass side panel with single screw installation, and upgraded Smart Device V2.
- MORE MODERN: USB 3.1 Gen 2-compatible USB-C connector on the front panel, it’s easier than ever to connect the newest smartphones, high-speed external storage, or the latest peripherals to your PC.
- SMART DEVICE V2: Includes a faster microprocessor for NZXT CAM-powered control of two RGB lighting channels and three fan channels that support either voltage regulated or PWM fans..
- POWERED BY NZXT CAM: Use the intuitive NZXT CAM application to monitor and control your build, choosing from presets or custom controls for your RGB lighting and fans to create your dream PC.
- SPECS: Max GPU Clearance: 265-325mm, Radiaor Support – Front: 240mm or Rear: 120mm.
Check StockPCIE Riser 1x to 16x Graphic Extension with Temperature Sensor for Bitcoin GPU Mining Powered Riser Adapter Card ,New Version
- ★1. PCIE Riser 1x to 16x Graphic Extension this new version adds the temperature sensor and digital temperature display, which can Intuitively....
- ★2.PCIE Riser 1x to 16x high quality 6-Pin pci-e riser kit are the best solution for setting up Ethereum/Bitcoin/Litecoin mining rigs or any other....
- ★3.Stability--4 Solid Capacitors on each card, voltage regulation, and overcurrent protection make the power delivery more safe and more stable..
- ★4.PCIE Riser perfect Length--24inch(60cm) USB 3.0 riser cable enabling more flexibility in the placement of your PCI-E devices.
- ★5.More Option--4PIN, and two Graphic card 6PIN interface, three interface optional。 This new version adds the temperature sensor and temperature....
Check StockLian Li O11DMINI-1 Vertical GPU Bracket KIT /PCIE 4.0 / White -O11DMINI-1W-4
- Vertical Graphics card holder for O11Dynamic XL with PCI-E 3.0 Riser Cable.
- "NOT" Compatible with PCI-E 4.0 VGA Card.
- 5 slots offer builders more installation options.
- Included PCI-E Riser Cable , allows you to mount a PCI-E 16X Card..
- In the condition of using the included riser cable (PCIE3.0) with a PCIE 4.0 motherboard and a PCIE 4.0 GPU, please follow steps to set up your BIOS to make it compatible..
Check Stock
NZXT H210i - CA-H210i-W1 - Mini-ITX PC Gaming Case - Front I/O USB Type-C Port - Tempered Glass Side Panel Cable Management - Water-Cooling Ready - Integrated RGB Lighting - White/Black
- NEW FEATURES: Front I/O USB Type-C Port, Tempered glass side panel with single screw installation, and upgraded Smart Device V2.
- MORE MODERN: USB 3.1 Gen 2-compatible USB-C connector on the front panel, it’s easier than ever to connect the newest smartphones, high-speed external storage, or the latest peripherals to your PC.
- SMART DEVICE V2: Includes a faster microprocessor for NZXT CAM-powered control of two RGB lighting channels and three fan channels that support either voltage regulated or PWM fans..
- POWERED BY NZXT CAM: Use the intuitive NZXT CAM application to monitor and control your build, choosing from presets or custom controls for your RGB lighting and fans to create your dream PC.
- SPECS: Max GPU Clearance: 265-325mm, Radiaor Support - Front: 240mm or Rear: 120mm.
- The new Smart Device V2 includes a faster microprocessor for NZXT CAM-powered control of two HUE 2 RGB lighting channels and three fan channels that support either voltage regulated or PWM fans..
Check Stock
MZHOU PCI-E 1X to 16X Riser Card with M.2 to PCI-E X1 NGFF Slot NVME Adapter Card,for Bitcoin Crypto Mining Ethereum Mining（Black）
- PCI-E 1X to 16X riser card---VER009S-PLUS version, a high-performance PCI Express riser card, which can extend the motherboard PCIE X1 slot to the PCIE X16 slot. Mainly designed for Ethereum/Bitcoin mining equipment or more GPU mining equipment..
- The PCI-E card can be inserted into any PCI-E slot: x1, x4, x8 or x16. The USB 3.0 transfer cable can flexibly place your PCI-E devices.Plug and play..
- M.2 NGFF to PCI-E X16 adapter card, support the M.2 NGFF slot of PCI-E channel,using this adapter card can convert the M. 2 NGFF interface into a common PCI-E X16 interface..
- M.2 NGFF adapter card have 4 fixed holes on the board, 30mm,12mm, 19mm，21mm.Can be broken off positioning according to the length of the card slot in your machine..
- Support System：Compatible with all WINDOWS systems, LINUX, MAC. Package contents:PCI-E 16X Main Card*1/PCI-E 1X Plug-in Card*1/24in USB 3.0 Cable*1/6PIN to 15PIN Power Cable*1/M.2 to PCI-E riser card*1/Screw*1/Screwdriver*1.
Check Stock
Newest VER009S PCIE Riser Express Cable 1X to 16X (Dual-6pin / MOLEX) with Led Graphics Extension Ethereum ETH Mining Powered PCI-E Riser Adapter Card, with 24inches USB 3.0 Cable, 6 Pack
- High-performance PCI-E Riser Board: This PCIE riser can expand the motherboard PCI-E X1 slot to the PCI-E X16 slot. It will provide safe and reliable connections with more PCI-E X16 graphics cards. It will be mainly used to build small open-air equipment or a large rack-mounted miner..
- The Safety and Stability You Want: This GPU riser is equipped with 4 upgraded FP solid capacitors, which are a reliable source of safe and stable power. They can perfectly prevent overheating and overvoltage and provide reliable protection for power transmission..
- Yes, It’s of Course VER 009S: 009S version of the riser mining kit is the latest and most advanced solution for setting up GPU mining equipment. Suitable for all Window systems, LINUX and MAC..
- More Choices: This PCIE riser 1x 16x have 4PIN and two graphics card 6PIN interfaces (two 6PIN interfaces have different directions) are optional power supplies. They can provide an independent power supply of the graphics card-Enhance power supply performance, which solve the problem of insufficient power supply and easy burnout.
- and reduces the burden on the motherboard when using more graphics cards..
- Upgrade Design: This mining PCIE riser has 24inches (60cm) USB 3.0 cable, the cable with shielded net inside is more s....
Check StockPCI 32 BIT Riser Card with Flex Crypto Mining Cable
- PCI 32 BIT Riser Card with Flex Cable. 1-slot PCI 32 bits/5V 66MHz riser card with 6" flexible cable..
- Authentic only if sold by Micro SATA Cables..
- Categories: Drive Adapters, Drive Converters, PCI & PCI-E Products, PCI / PCI-E Cards.
Check StockNZXT H210i - CA-H210i-B1 - Mini-ITX PC Gaming Case - Front I/O USB Type-C Port - Tempered Glass Side Panel Cable Management - Water-Cooling Ready - Integrated RGB Lighting - Black
- NEW FEATURES: Front I/O USB Type-C Port, Tempered glass side panel with single screw installation, and upgraded Smart Device V2.
- MORE MODERN: USB 3.1 Gen 2-compatible USB-C connector on the front panel, it’s easier than ever to connect the newest smartphones, high-speed....
- SMART DEVICE V2: Includes a faster microprocessor for NZXT CAM-powered control of two RGB lighting channels and three fan channels that support either....
- POWERED BY NZXT CAM: Use the intuitive NZXT CAM application to monitor and control your build, choosing from presets or custom controls for your RGB....
- SPECS: Max GPU Clearance: 265-325mm, Radiaor Support - Front: 240mm or Rear: 120mm.
Check Stock
PCIe Splitter 1 to 4 Multiplier Riser Card, PCI Express X1 Expansion Risers Card, PCIE USB 3.0 Ports Adapter Card for Ethereum Bitcoin ETH GPU Mining Miner Rig
- ✨ 【Excellent Extendability】 Our PCIe expansion riser card is mainly to solve the problem of less interface on the motherboard, 1 port can be extended to 4. The bus interface is PCI-E X 1 that compatible with X4, X8, X16 interface graphics card ..
- ✨【Higher Stability】 ---Driver-free Design. The PCIe1 to 4 Multiplier Risers card's main control board adopts the direct power supply mode of the PCI Express interface, no more need the external power. (The motherboard must be powered off before installation).
- ✨【Advanced Heat Dissipation 】 Motherboard IC which based on high-quality ASM1184 chipset to solve the heat dissipation problem. With aluminum alloy heat sink can effectively dissipate excess heat. Provide the stability and durability of riser card..
- ✨ 【Port Quantity 】 The Pcie splitter 1 to 4 can make sure multiple lines work at the same time. Easy to install. (Note: This pcie splitter 1 to 4 pci riser card cannot be connected to USB devices, since the 4 USB ports transfer PCI-E signals, not USB signals.).
- ✨【Warranty】--30-day money-back guarantee service for new product. If you have any questions about pcie splitter risers card, please feel free to contact us, we will definitely solve your problem within 12 hours..
Check Stock
